summaryrefslogtreecommitdiff
path: root/src/telemini-v2.0
Commit message (Collapse)AuthorAge
* altos: Remove cc1111 productsKeith Packard2018-10-13
| | | | | | We're not testing these anyways; building new firmware for them is not helpful. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Move 'ao_force_freq' to ao_config.cKeith Packard2017-05-04
| | | | | | Instead of having to add it to each product using this variable. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Split out TeleMini v3 log/telem labelingKeith Packard2017-02-20
| | | | | | | Allow the ground software to know which TeleMini version is in use, even though they are very similar with only ADC values differing. Signed-off-by: Keith Packard <keithp@keithp.com>
* Switch from GPLv2 to GPLv2+Keith Packard2016-07-12
| | | | Signed-off-by: Keith Packard <keithp@keithp.com>
* altos/telemini-v2.0: Remove show tasks commandKeith Packard2016-06-29
| | | | | | There's not enough memory for this command, and it isn't necessary. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Use 32-bits for flight state data (alt/speed/accel)Keith Packard2014-07-10
| | | | | | | Stores 32-bits for all of the flight parameters. Uses 64-bit intermediates for kalman computation. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos/telemini-v2.0: Enable beep config and radio rate configKeith Packard2014-07-09
| | | | | | use the smaller pa to altitude table to make room for the new code Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Call ao_telemetry_reset_interval when telemetry rate changesKeith Packard2014-07-05
| | | | | | | This lets the radio code adjust the telemetry packet sending pattern when the data rate changes. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos/telemini-v2.0: Disable beep frequency config on TeleMini v2.0Keith Packard2014-06-11
| | | | | | Not enough flash otherwise. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos/telemini-v2.0: Enable beep frequency configurationKeith Packard2014-05-15
| | | | | | Now that there's space for this, add it in. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos/telemini-v2.0: Remove old baro->alt conversion tableKeith Packard2014-05-15
| | | | | | TeleMini doesn't have two baro sensors... Signed-off-by: Keith Packard <keithp@keithp.com>
* altos/cc1111: Switch P1_0 from a green LED to USB pullupKeith Packard2014-05-15
| | | | Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Add configurable beep toneKeith Packard2014-05-02
| | | | | | | | | | This lets you directly set the mid-range beep tone; the high and low tones remain set off of that in the same ratio as before. Note that none of the cc1111 products get this feature as they don't have enough flash space anymore... Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Report battery voltage instead of S at startupKeith Packard2014-04-05
| | | | | | | This works on everything with a beeper except TeleMetrum v1.0 which just doesn't have enough flash space for the code. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Rename 'core' to 'kernel'Keith Packard2014-04-05
| | | | | | | core remains a bad name to use -- dirvish skips files (and directories, it seems) with that name. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Clean up .gitignore and add a few random filesKeith Packard2013-11-12
| | | | Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Set TeleMini v2.0 USB ID correctlyKeith Packard2013-09-19
| | | | | | Uses 0x0027 Signed-off-by: Keith Packard <keithp@keithp.com>
* altos/telemini-v2.0: Change initialization orderKeith Packard2013-09-15
| | | | | | Make sure busses are running before devices are initialized Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Stop copying cc1111 binaries to the altos/src dirKeith Packard2013-09-15
| | | | | | Just clutters up that directory. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Split EasyMini and TeleMini log formatsKeith Packard2013-08-29
| | | | | | | Same data, but EasyMini uses a 3.0V supply while TeleMini uses 3.3V, which changes the intepretation of all of the ADC values Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Don't use ao_data on cc1111 projectsteleminiKeith Packard2013-08-26
| | | | | | | | cc1111 ao_adc.c supplies the needed globals at this point, and linking both into the program leads to two different versions of each at different addresses (yay SDCC linker!) Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Check for MS5607 MISO low before sleepingKeith Packard2013-08-26
| | | | | | | If the MISO line goes low before we manage to configure the interrupts, we'll miss it entirely unless we check the pin explicitly. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos/telemini-v2.0: Add ao_exti.h depend. Init beeper and usb.Keith Packard2013-08-26
| | | | Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Get telemini to copy current MS5607 state to ring.Keith Packard2013-08-26
| | | | | | | The ADC code is responsible for actually inserting the non-ADC data into the ring, so do the copy there. Signed-off-by: Keith Packard <keithp@keithp.com>
* cc1111: Rework ADC configuration a bit, fix Tm V2 ADC usageKeith Packard2013-08-26
| | | | | | | The Tm v2 ADC code was not actually fetching and storing the ADC conversion values. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos/teletiny-v2.0: Support multiple SPI busses on CC1111Keith Packard2013-08-25
| | | | | | Needed for TeleMini v2.0 Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Add exti and spi to telemini-v2.0Keith Packard2013-08-25
| | | | | | No longer builds like this Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Make TeleMini v2.0 fitKeith Packard2013-08-25
| | | | | | Mash lots of storage locations and code around to shrink stuff down to size Signed-off-by: Keith Packard <keithp@keithp.com>
* Initial TeleMini bitsKeith Packard2013-08-25
Signed-off-by: Keith Packard <keithp@keithp.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-10-17 06:18:57 +0000