summaryrefslogtreecommitdiff
path: root/src/telemetrum-v2.0
Commit message (Collapse)AuthorAge
* altos: Move common build definitions to src/Makefile.defsKeith Packard2019-02-18
| | | | | | | | This cleans up the build process for all architectures, providing a common place to specify vpath, cflags and build rules for various common files. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos/stm: Make beeper driver support all possible tim234 configsKeith Packard2018-10-19
| | | | | | And update all users to be explicit about the desired config. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Add generic LED driver.Keith Packard2018-10-13
| | | | | | | | | | | This driver uses the generic GPIO functions and allows per-LED port and pin configuration. It supports up to 32 LEDs. Rename SoC-specific LED drivers. Remove enabled parameter to ao_led_init Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Eliminate 'pin' field from GPIO functionsKeith Packard2018-10-13
| | | | | | | This was used with the 8051 bit-addressing mode to provide single-instruction access to GPIO pins. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Use stdbool true/false instead of TRUE/FALSEKeith Packard2018-10-13
| | | | Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Switch to newlib-nano for libc on armKeith Packard2018-10-13
| | | | | | Stop using pdclib Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Define AO_LOG_FORMAT in */ao_pins.h. Use in ao_cmd.cKeith Packard2017-10-22
| | | | | | | Instead of having a global variable define the log format, use a macro instead to save data space. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Flash all LEDS during power onKeith Packard2016-08-04
| | | | | | | | | | | | | This tests the LEDS to make sure they all work on the following devices: easymega-v1.0 telebt-v3.0 teledongle-v3.0 telemega-v1.0 telemega-v2.0 telemetrum-v2.0 Signed-off-by: Keith Packard <keithp@keithp.com>
* Switch from GPLv2 to GPLv2+Keith Packard2016-07-12
| | | | Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Add HAS_COMPANION to new boards with companion connectorsKeith Packard2015-08-20
| | | | | | | | | | | Thanks much to Rob Derstadt for discovering this bug! TeleMetrum v2.0, TeleMega, EasyMega, TeleBalloon v2.0 all have companion connectors and yet HAS_COMPANION was not defined. This disabled companion telemetry packets on these products, but otherwise didn't have any effect. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Update other CONFIG_EEPROM users to set LOG_ERASE_MARKKeith Packard2014-06-07
| | | | | | | All products placing config and erase marks in on-CPU EEPROM needs to configure the erase code correctly. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos/stm: Make stm applications depend on ao_boot.hKeith Packard2014-05-21
| | | | | | This should make sure they get recompiled when boot stuff changes. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Report battery voltage instead of S at startupKeith Packard2014-04-05
| | | | | | | This works on everything with a beeper except TeleMetrum v1.0 which just doesn't have enough flash space for the code. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Report battery, apogee and main voltages over APRSKeith Packard2014-01-15
| | | | | | This makes APRS more usable when you mute the RF audio on the HT. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Switch APRS to compressed position formatKeith Packard2014-01-14
| | | | | | This provides lat/lon/alt in fewer bytes while improving precision. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Remove ARM .ihx files on 'make clean'Keith Packard2013-12-10
| | | | Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Build .ihx files for all arm projectsKeith Packard2013-12-08
| | | | | | The .ihx version can be processed by the java loader Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: include ao_eeprom.h in ao_telemetrum.c to define ao_eeprom_initKeith Packard2013-11-12
| | | | Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Move TeleMetrum v2.0 to using internal eeprom for configKeith Packard2013-11-12
| | | | | | This leaves the whole 8MB of flash for flight storage Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Use installed pdclibKeith Packard2013-10-10
| | | | | | Switch over to the installed pdclib everywhere Signed-off-by: Keith Packard <keithp@keithp.com>
* altos/telemetrum-v2.0: Use red LED during boot timeKeith Packard2013-09-15
| | | | | | | If the LED is stuck on, then the board has failed to initialize, so use red instead of green as a warning indicator. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: TM v2 places the MMA6555 upside down compared to TmegaKeith Packard2013-08-28
| | | | | | Means we need to invert the data coming out to make it work Signed-off-by: Keith Packard <keithp@keithp.com>
* altos/telemetrum-v2.0: Use 9600 baud for ubloxtelemetrum-v2.0Keith Packard2013-08-27
| | | | | | Something is up with the Max 7 Signed-off-by: Keith Packard <keithp@keithp.com>
* altos/telemetrum-v2.0: Fix MMA6555 SPI pin assignmentKeith Packard2013-08-27
| | | | | | For TM v2.0, it's on PB 3-5, not PE13-15 Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Rename TeleMetrum v2.0 ADC sense membersKeith Packard2013-08-27
| | | | | | Use sense_a and sense_m instead of sense[2] Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Add TeleMetrum v2.0 boot loaderKeith Packard2013-08-27
| | | | Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Initial TeleMetrum v2.0 bitsKeith Packard2013-08-27
Adds new telemetry and logging formats along with code for TeleMetrum v2.0 design. Signed-off-by: Keith Packard <keithp@keithp.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-10-17 14:50:19 +0000