summaryrefslogtreecommitdiff
path: root/src/telemega-v1.0
Commit message (Collapse)AuthorAge
* altos: Move common build definitions to src/Makefile.defsKeith Packard2019-02-18
| | | | | | | | This cleans up the build process for all architectures, providing a common place to specify vpath, cflags and build rules for various common files. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos/stm: Make beeper driver support all possible tim234 configsKeith Packard2018-10-19
| | | | | | And update all users to be explicit about the desired config. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Add generic LED driver.Keith Packard2018-10-13
| | | | | | | | | | | This driver uses the generic GPIO functions and allows per-LED port and pin configuration. It supports up to 32 LEDs. Rename SoC-specific LED drivers. Remove enabled parameter to ao_led_init Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Eliminate 'pin' field from GPIO functionsKeith Packard2018-10-13
| | | | | | | This was used with the 8051 bit-addressing mode to provide single-instruction access to GPIO pins. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Use stdbool true/false instead of TRUE/FALSEKeith Packard2018-10-13
| | | | Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Switch to newlib-nano for libc on armKeith Packard2018-10-13
| | | | | | Stop using pdclib Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Define AO_LOG_FORMAT in */ao_pins.h. Use in ao_cmd.cKeith Packard2017-10-22
| | | | | | | Instead of having a global variable define the log format, use a macro instead to save data space. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Flash all LEDS during power onKeith Packard2016-08-04
| | | | | | | | | | | | | This tests the LEDS to make sure they all work on the following devices: easymega-v1.0 telebt-v3.0 teledongle-v3.0 telemega-v1.0 telemega-v2.0 telemetrum-v2.0 Signed-off-by: Keith Packard <keithp@keithp.com>
* Switch from GPLv2 to GPLv2+Keith Packard2016-07-12
| | | | Signed-off-by: Keith Packard <keithp@keithp.com>
* altos/drivers: Use more reliable byte interface for CC1120 receptionKeith Packard2016-06-29
| | | | | | | This replaces direct register access with function calls to allow that code to respect the hardware requirements. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Make sure AO_MMA655X_INVERT is declared where neededKeith Packard2016-05-02
| | | | | | | | Add #define AO_MMA655X_INVERT 0 to existing products which didn't declare it at all. This will make sure the value is set correctly for each new board. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Add HAS_COMPANION to new boards with companion connectorsKeith Packard2015-08-20
| | | | | | | | | | | Thanks much to Rob Derstadt for discovering this bug! TeleMetrum v2.0, TeleMega, EasyMega, TeleBalloon v2.0 all have companion connectors and yet HAS_COMPANION was not defined. This disabled companion telemetry packets on these products, but otherwise didn't have any effect. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Use 32-bits for flight state data (alt/speed/accel)Keith Packard2014-07-10
| | | | | | | Stores 32-bits for all of the flight parameters. Uses 64-bit intermediates for kalman computation. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos/telemega-v1.0: Adjust config params to make flight erase workKeith Packard2014-06-07
| | | | | | | | | | | | | | | Flight erase records are supposed to be written after the ao_config to eeprom in telemega. They were getting written in the middle of one of the pyro channel config blocks. Put a bunch of space between the two by making the config max 1024 bytes instead of 128 bytes. Set the log erase marker to 0x55 -- eeprom comes from the factory as 0x00, so we use any value other than 0x55 to indicate 'unused' erase slots. Save space for more flight erase blocks; we've got plenty. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos/stm: Make stm applications depend on ao_boot.hKeith Packard2014-05-21
| | | | | | This should make sure they get recompiled when boot stuff changes. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Report battery voltage instead of S at startupKeith Packard2014-04-05
| | | | | | | This works on everything with a beeper except TeleMetrum v1.0 which just doesn't have enough flash space for the code. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Add missing ADC divider values for Tmega v1.0Keith Packard2014-01-15
| | | | | | Somehow I left these out of the previous commit Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Report battery, apogee and main voltages over APRSKeith Packard2014-01-15
| | | | | | This makes APRS more usable when you mute the RF audio on the HT. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Switch APRS to compressed position formatKeith Packard2014-01-14
| | | | | | This provides lat/lon/alt in fewer bytes while improving precision. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Try IMU self-test 10 times before giving upKeith Packard2013-12-18
| | | | | | | | This should keep the device from failing to boot unless the IMU is actually broken. Oh, and if self test does fail, this places the flight computer in 'Invalid' state rather than panic. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Remove ARM .ihx files on 'make clean'Keith Packard2013-12-10
| | | | Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Rename telemega-v0.3 to telemega-v1.0Keith Packard2013-12-09
Signed-off-by: Keith Packard <keithp@keithp.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-10-16 02:29:18 +0000