summaryrefslogtreecommitdiff
path: root/src/megametrum-v0.1/Makefile
Commit message (Collapse)AuthorAge
* name change from MegaMetrum to TeleMegaBdale Garbee2013-04-22
|
* altos: Stop including profiling and stack guard code in megametrumKeith Packard2012-12-07
| | | | | | These take CPU time and memory and are intended only for debugging Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Hook APRS up to the radioKeith Packard2012-12-06
| | | | | | | This adds an arbitrary-length packet writing function to the radio code. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos/megametrum: Depend on Makefile contents for buildKeith Packard2012-10-25
| | | | | | This ensures that everything is rebuilt when the Makefile changes Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Add stack-guard code. Uses STM MPU to trap stack overflow.Keith Packard2012-10-25
| | | | | | | | This marks the lowest portion of the stack as inaccessible to the CPU, causing the processor to fault when it reaches it. The fault then generates a panic message so that the user can know what happened. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: profiling on STM32LKeith Packard2012-10-25
| | | | | | Add sample-based profiling, using a 1kHz timer Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Megametrum uses altitude-pa.h, not altitude.hKeith Packard2012-10-12
| | | | | | | Make sure megametrum gets rebuilt as needed when the various altitude-pa related files change Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Trigger sample complete when all data are readyKeith Packard2012-08-26
| | | | | | | This has each sensor mark a bit in the current data record which is then sent for processing when all of the data are present. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Add MMA655X driverKeith Packard2012-08-18
| | | | | | Just debug code at this point, will complete on real hardware Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Place STM config values at fixed addresses for re-useKeith Packard2012-07-17
| | | | | | | | Just like cc1111, stick the serial number and radio calibration values at known fixed addresses so that when re-flashing the board, we can go find the existing values. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: megametrum depends on ao_companion.hKeith Packard2012-07-16
| | | | Signed-off-by: Keith Packard <keithp@keithp.com>
* altos/megametrum: Support the four additional pyro channelsKeith Packard2012-07-14
| | | | | | These use the new pyro code to allow for some flexibility in programming. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Have 'make clean' remove all programs, even old onesKeith Packard2012-07-11
| | | | | | | This makes sure that changing version numbers doesn't leave old compiled output lying around. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Rename *_mm.c back to *.cKeith Packard2012-07-10
| | | | | | Was just a temporary hack to keep cc1111 products building during MM development. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Move profiling settings to MakefileKeith Packard2012-07-03
| | | | | | | Instead of splitting the changes across Makefile and ao_pins.h, put them both in Makefile to simplify enabling profiling. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Disable mag sensor for megametrumKeith Packard2012-06-27
| | | | | | | It doesn't work unless USB is connected or occasionally while the debug port is enabled. It's mystic. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Make profiling Viterbi decoder more usefulKeith Packard2012-06-27
| | | | | | | This blocks starting the decoder until all of the data have arrived so that the time spent in the decoder is easily computed. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Enable full flight computer functionality in MegaMetrumKeith Packard2012-06-26
| | | | | | This turns on everything that currently works Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: rename ao_viterbi.c to ao_fec_rx.cKeith Packard2012-06-26
| | | | | | Keep it parallel with ao_fec_tx.c Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Add ao_viterbi.c to megametrum buildKeith Packard2012-06-23
| | | | | | | It's not used yet, just wanted to see how big the resulting object file was (492 bytes). Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Add telemetry to megametrumKeith Packard2012-06-17
| | | | | | Now that the radio works Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Software implemenation of CC1111 radio encodingKeith Packard2012-06-17
| | | | | | | Add CRC, whitening, FEC and interleaving routines for transmission path to allow cc1120 to send telem packets to cc1111. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Start making cc1120 radio workKeith Packard2012-06-15
| | | | | | RDF tones and radio calibration work now. Signed-off-by: Keith Packard <keithp@keithp.com>
* Get megametrum ready to at least log flight dataKeith Packard2012-05-25
| | | | | | Doesn't track flight state changes correctly. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Finish ms5607 supportKeith Packard2012-05-18
| | | | | | | | | | This has the MS5607 polling once each tick for pressure and temperature and then saving that in a global variable. The command UI provides for dumping the prom data so that an eeprom file can have raw sensor data along with the conversion factors necessary to compute useful values. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Switch megametrum compile to -OsKeith Packard2012-05-06
| | | | | | Looks like gcc has compiler bugs with -O0 Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Add hmc5883 and mpu6000 drivers to megametrum buildKeith Packard2012-04-25
| | | | Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Starting to write cc1120 driverKeith Packard2012-04-17
| | | | | | | This does "something" in radio test mode, appearing to generate a 730MHz signal. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Use new USB driver in megametrum-v0.1 productKeith Packard2012-04-14
| | | | Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Add support for multiple SPI busses and sharing device driversKeith Packard2012-04-14
| | | | | | | | | | | | | | | | The STM32L151 has several SPI busses, and we want to use more than one, so add a 'bus' parameter to the SPI interfaces. To avoid wasting time on AVR and CC1111 processors which only use one SPI bus, elide those parameters from the actual functions by wrapping them with macros. Configuring chip select is now all macroized so that each chip can have its own version, allowing the STM to share the various SPI device drivers with the cc1111 and avr processors. Note that only the M25 driver has been ported; porting the others is 'trivial', but not necessary at this point. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Add beeper driver to STM archKeith Packard2012-04-09
| | | | | | Drives the MegaMetrum beeper Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: ARM -O0 flag appears to generate buggy codeKeith Packard2012-04-09
| | | | | | Use -Os always, which is annoying... Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Add ADC support to megametrum firmwareKeith Packard2012-04-07
| | | | | | Measures all MM igniter and battery voltages. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Add DMA, SPI and MS5607 driversKeith Packard2012-04-06
| | | | Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: megametrum builds an ELF file, not an IHX fileKeith Packard2012-04-02
| | | | | | Name it appropriately. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Add ao_freq.c to megametrum buildKeith Packard2012-03-28
| | | | | | I think this will be needed to compute radio settings on the cc1120 Signed-off-by: Keith Packard <keithp@keithp.com>
* stm-demo does not use altitude.hKeith Packard2012-03-28
|
* Use -Os for STM apps. Fix altos.ld to matchall .rodata* sectionsKeith Packard2012-03-28
| | | | | | | | Without .rodata*, it would stick the flash copy of the data on top of any further .rodata* sections. Fortunately, the linker catches that and complains... Signed-off-by: Keith Packard <keithp@keithp.com>
* Get config stuff hooked up for MegaMetrumKeith Packard2012-03-28
| | | | | | This stubs out enough stuff to let ao_config link and work Signed-off-by: Keith Packard <keithp@keithp.com>
* Add preliminary MegaMetrum v0.1 supportKeith Packard2012-03-28
This turns on an LED, enables the internal R/C clock, hooks USART3 to the GPS chip and USART1 to the console. Signed-off-by: Keith Packard <keithp@keithp.com>
generated by cgit v1.2.3 (git 2.39.1) at 2026-01-10 11:59:45 +0000