diff options
| -rw-r--r-- | TeleLaunch/index.mdwn | 23 |
1 files changed, 20 insertions, 3 deletions
diff --git a/TeleLaunch/index.mdwn b/TeleLaunch/index.mdwn index bb7a105..6cb3d2c 100644 --- a/TeleLaunch/index.mdwn +++ b/TeleLaunch/index.mdwn @@ -36,6 +36,10 @@ case, and is typically placed on a table for use by the designated LCO. * Rotary knob for pad selection +The TeleLCO hardware design is available from +[git.gag.com](http://git.gag.com) in the project +[hw/telelco](http://git.gag.com/?p=hw/telelco;a=summary). + ### TeleLCOTwo ### A small LCO board capable of handling up to two TeleFireOne pyro @@ -48,8 +52,13 @@ it should interact with, and then a simple rocker switch selects between the two during use. TeleLCOTwo comes packaged in a weather-sealed polycarbonate box with -switches on one face, and BNC antenna connector and USB connectors. It -can be placed on a table, but is typical hand-held during operation. +switches on one face, and BNC antenna connector and USB connectors +through the box walls. It can be placed on a table, but is typically +hand-held during operation. + +The TeleLCOTwo hardware design is available from +[git.gag.com](http://git.gag.com) in the project +[hw/telelcotwo](http://git.gag.com/?p=hw/telelcotwo;a=summary). ## Pyro Boards ## @@ -88,13 +97,17 @@ Each board features: ### TeleFireOne ### TeleFireOne is a pyro board supporting a single igniter circuit. This -makes TeleFireOne idea for individuals, launch trailers, or for "away +makes TeleFireOne ideal for individuals, launch trailers, or for "away cells" at larger club launches. All high-current connections are made on the board using standard 1/4-inch spade lugs, with screw terminals for the siren and strobe. This allows for easy packaging and quick board swaps. +The TeleFireOne hardware design is available from +[git.gag.com](http://git.gag.com) in the project +[hw/telefireone](http://git.gag.com/?p=hw/telefireone;a=summary). + ### TeleFireEight ### TeleFireEight has eight igniter circuits, making it ideal for use at @@ -105,6 +118,10 @@ each. All connections are made on the board using 1/4-in spade lugs for eash packaging and quick board swaps. +The TeleFireEight hardware design is available from +[git.gag.com](http://git.gag.com) in the project +[hw/telefireeight](http://git.gag.com/?p=hw/telefireeight;a=summary). + ## Documentation ## Not written yet. |