8 files changed, 21 insertions, 0 deletions
diff --git a/Documents/easymini-outline.pdf b/Documents/easymini-outline.pdf
new file mode 100644
index 0000000..76a0995
--- /dev/null
+++ b/Documents/easymini-outline.pdf
diff --git a/Documents/index.mdwn b/Documents/index.mdwn
index 8f0238e..f6a4705 100644
--- a/Documents/index.mdwn
+++ b/Documents/index.mdwn
@@ -14,5 +14,14 @@ think before you act!
  * [Remove the protection circuit board from a LiPo battery](./FixBattery)
  * [Use a separate pyro battery](./SeparatePyroBattery)
 
+## Product Outlines and Drill Patterns ##
+
+These are single page PDF files that show the outline of each product
+along with where to drill holes for mounting.
+
+ * [TeleMetrum Outline (both v1 and v2)](./telemetrum-outline.pdf)
+ * [TeleMega Outline](./telemega-outline.pdf)
+ * [EasyMini and TeleMini Outline](./easymini-outline.pdf)
+
 ## Collected References ##
 
diff --git a/Documents/telemega-outline.pdf b/Documents/telemega-outline.pdf
new file mode 100644
index 0000000..2f20c62
--- /dev/null
+++ b/Documents/telemega-outline.pdf
diff --git a/Documents/telemetrum-outline.pdf b/Documents/telemetrum-outline.pdf
new file mode 100644
index 0000000..af91352
--- /dev/null
+++ b/Documents/telemetrum-outline.pdf
diff --git a/EasyMini/index.mdwn b/EasyMini/index.mdwn
index a65c3cb..61dd9ca 100644
--- a/EasyMini/index.mdwn
+++ b/EasyMini/index.mdwn
@@ -58,6 +58,9 @@ There is a single manual for EasyMini and all other Altus Metrum products,
 which is available in [html](../AltOS/doc/altusmetrum.html) and 
 [pdf](../AltOS/doc/altusmetrum.pdf) formats.
 
+An outline of the board with drill hole locations is available in
+[pdf](../Documents/easymini-outline.pdf] format.
+
 The hardware design files can be found on [git.gag.com](http://git.gag.com) 
 in the project [hw/easymini](http://git.gag.com/?p=hw/easymini;a=summary).  
 
diff --git a/TeleMega/index.mdwn b/TeleMega/index.mdwn
index 2118fcf..3894ac0 100644
--- a/TeleMega/index.mdwn
+++ b/TeleMega/index.mdwn
@@ -77,6 +77,9 @@ There is a single manual for TeleMega and most other Altus Metrum products,
 which is available in [html](../AltOS/doc/altusmetrum.html) and 
 [pdf](../AltOS/doc/altusmetrum.pdf) formats.
 
+An outline of the board with drill hole locations is available in
+[pdf](../Documents/telemega-outline.pdf] format.
+
 The hardware design current gEDA files are available from 
 [git.gag.com](http://git.gag.com) in the project 
 [hw/telemega](http://git.gag.com/?p=hw/telemega;a=summary).  
diff --git a/TeleMetrum/index.mdwn b/TeleMetrum/index.mdwn
index 38eae3b..a263980 100644
--- a/TeleMetrum/index.mdwn
+++ b/TeleMetrum/index.mdwn
@@ -76,6 +76,9 @@ There is a single manual for TeleMetrum and all other Altus Metrum products,
 which is available in [html](../AltOS/doc/altusmetrum.html) and 
 [pdf](../AltOS/doc/altusmetrum.pdf) formats.
 
+An outline of the board with drill hole locations is available in
+[pdf](../Documents/telemetrum-outline.pdf] format.
+
 The hardware design current gEDA files are available from 
 [git.gag.com](http://git.gag.com) in the project 
 [hw/telemetrum](http://git.gag.com/?p=hw/telemetrum;a=summary).  
diff --git a/TeleMini/index.mdwn b/TeleMini/index.mdwn
index ee861c3..2b0d841 100644
--- a/TeleMini/index.mdwn
+++ b/TeleMini/index.mdwn
@@ -57,6 +57,9 @@ There is a single manual for TeleMini and all other Altus Metrum products,
 which is available in [html](../AltOS/doc/altusmetrum.html) and 
 [pdf](../AltOS/doc/altusmetrum.pdf) formats.
 
+An outline of the board with drill hole locations is available in
+[pdf](../Documents/easymini-outline.pdf] format.
+
 The hardware design files can be found on [git.gag.com](http://git.gag.com) 
 in the project [hw/telemini](http://git.gag.com/?p=hw/telemini;a=summary).