Move telemini v1.2 content to telemini page, v1.0 to history

Match TeleMetrum plan, which is quite sensible

Signed-off-by: Keith Packard <keithp@keithp.com>

1 files changed, 59 insertions, 3 deletions

diff --git a/TeleMini/index.mdwn b/TeleMini/index.mdwn
index 21b3822..26dcabb 100644
--- a/TeleMini/index.mdwn
+++ b/TeleMini/index.mdwn
@@ -1,7 +1,63 @@
 # TeleMini #
 
-There are two versions of TeleMini:
+TeleMini version 1.2 is a small, baro-only recording dual-deploy
+altimeter for model rocketry with integrated telemetry link. It's
+currently in development, with production planned to start in the fall
+of 2013.
 
- * [Version 1.0](v1.0) — the original TeleMini, 0.5 x 1.5 inches
- * [Version 1.2](v1.2) — the new TeleMini, 0.8 x 1.5 inches
+For the latest TeleMini firmware and related ground station software, please
+visit the [AltOS](../AltOS) page on this site.
 
+These are photos of our current prototype version: 
+
+<a href="v1.2/telemini-top.jpg"> <img src="v1.2/telemini-top-thumb.jpg"></a>
+<a href="v1.2/telemini-parts.jpg"> <img src="v1.2/telemini-parts-thumb.jpg"></a>
+
+## Features ##
+
+### User View ###
+
+ * Recording altimeter for model rocketry
+ * Supports dual deployment (can fire 2 ejection charges)
+ * 70cm ham-band transceiver for telemetry downlink
+ * Barometric pressure sensor good to 100k' feet MSL
+ * Designed to use any battery from 3.7 - 12V
+ * Screw terminals for pyro connectors, switch and external battery
+ * Built-in USB connector for configuration and data download
+ * 1.5 x 0.8 inch board designed to fit inside 24mm airframe coupler tube
+
+### Developer View ###
+
+* Hardware Features
+	* [TI CC1111F32](http://focus.ti.com/docs/prod/folders/print/cc1111f32.html) Low Power RF System-on-Chip
+		* Sub-1Ghz transceiver
+		* 8051 MCU
+		* 32k Flash
+		* 4k RAM
+		* USB 2.0
+		* 6 12-bit analog inputs (11 bits with single-ended sensors)
+		* 2 channels of serial I/O
+		* digital I/O
+	* [Measurement Specialties MS5607](http://www.meas-spec.com/product/pressure/MS5607-02BA03.aspx) pressure sensor
+	* 1MB SPI flash
+* Software Features
+	* Written mostly in C with some 8051 assembler
+	* Runs from on-chip flash, uses on-chip RAM, stores flight data to
+		on-board flash memory
+* Tools Used
+	* [gEDA](http://www.gpleda.org/) for schematic capture and PCB layout
+	* [SDCC](http://sdcc.sourceforge.net/) compiler and source debugger
+* Licenses
+	* The hardware is licensed under the [TAPR](http://www.tapr.org) [Open Hardware License](http://www.tapr.org/ohl.html)
+	* The software is licensed [GPL version 2](http://www.gnu.org/licenses/old-licenses/gpl-2.0.html)
+
+## Artifacts ##
+
+There is a single manual for TeleMini and all other Altus Metrum products,
+which is available in [html](../AltOS/doc/altusmetrum.html) and 
+[pdf](../AltOS/doc/altusmetrum.pdf) formats.
+
+The hardware design files can be found on [git.gag.com](http://git.gag.com) 
+in the project [hw/telemini](http://git.gag.com/?p=hw/telemini;a=summary).  
+
+## [History of TeleMini](history) ##