summaryrefslogtreecommitdiff
path: root/MicroPeak
diff options
context:
space:
mode:
authorKeith Packard <keithp@keithp.com>2012-10-30 23:08:59 -0700
committerKeith Packard <keithp@keithp.com>2012-10-30 23:09:37 -0700
commite6f263b2cc4f7fabfed8d9fc49180d241a787692 (patch)
treef0c373742cd336ed05b2d062e10af7daa0c83279 /MicroPeak
parent82a565723347ab94a543beade4d395b67a4e0d78 (diff)
Add AltusMetrum logo to wiki title bar
Remove it from the MicroPeak page Signed-off-by: Keith Packard <keithp@keithp.com>
Diffstat (limited to 'MicroPeak')
-rw-r--r--MicroPeak/index.mdwn12
1 files changed, 4 insertions, 8 deletions
diff --git a/MicroPeak/index.mdwn b/MicroPeak/index.mdwn
index 026e665..647f21e 100644
--- a/MicroPeak/index.mdwn
+++ b/MicroPeak/index.mdwn
@@ -1,10 +1,6 @@
[[!meta title="MicroPeak"]]
-<center><img src="../logos/altusmetrum-oneline.svg" width="320"/></center>
-
-- - -
<img src="../logos/micropeak-oneline.svg" height="100"/>
-
# Introducing MicroPeak by AltusMetrum #
Micropeak is a peak-recording barometric altimeter for precision model
@@ -63,13 +59,14 @@ Here's a close-up view of the hardware
* High precision — 2.4Pa resolution (approximately 20cm at sea level)
* Factory calibrated.
* CR1025 Lithium Battery
- * 30mAh. Runs MicroPeak for 15 hours on the pad or in flight
+ * 30mAh. Runs MicroPeak for 10 hours on the pad or in flight
* Standard 6-pin AVR programming interface.
* Software Features
* Written in C
* Samples pressure every 96ms
- * Detect boost with 4m altitude change
+ * Delay 30s after power-on to finish airframe prep
+ * Detect boost with 10m altitude change
* Exponential averaging filter to minimize transient effects.
* Tools Used
@@ -80,5 +77,4 @@ Here's a close-up view of the hardware
* The hardware is licensed under the [TAPR](http://www.tapr.org) [Open Hardware License](http://www.tapr.org/ohl.html)
* The software is licensed [GPL version 2](http://www.gnu.org/licenses/old-licenses/gpl-2.0.html)
-
-<center><img src="../logo.svg" width="100"/></center>
+<center><img src="../logos/micropeak.svg" height="64"/>