Merge branch 'master' of ssh://git.gag.com/scm/git/web/altusmetrum

4 files changed, 54 insertions, 2 deletions

diff --git a/MPSerial.mdwn b/MPSerial.mdwn
new file mode 100644
index 0000000..c04a714
--- /dev/null
+++ b/MPSerial.mdwn
@@ -0,0 +1 @@
+[[!map pages="MPSerial/* and ! MPSerial/*/*"]]
diff --git a/MPSerial/index.mdwn b/MPSerial/index.mdwn
new file mode 100644
index 0000000..b31f12a
--- /dev/null
+++ b/MPSerial/index.mdwn
@@ -0,0 +1,47 @@
+[[!meta title="MPSerial"]]
+<img src="../logos/micropeak-oneline.svg" height="100"/>
+
+# MicroPeak Serial Interface (MPSerial) #
+
+The MicroPeak Serial Interface board provides a way to capture flight
+logs over a USB connection to a computer running Linux, Mac OS or
+Windows.
+
+## MicroPeak Data ##
+
+ * Stored in on-chip 512B eeprom
+ * Records raw barometer readings every 192ms
+ * Enough storage for 48 seconds
+
+No changes are needed to the MicroPeak hardware, but new firmware that
+includes the data download feature is necessary to use the MicroPeak
+Serial Interface.
+
+## MicroPeak Interface ##
+
+MicroPeak transmits the entire flight log via the LED just after
+reporting the last flight altitude at power up. The data are
+transmitted in regular serial format at 9600 baud.
+
+The MicroPeak Serial Interface board contains a phototransistor,
+op-amp and serial-to-USB interface chip.
+
+## Developer View ##
+
+Here's a close-up view of the hardware
+
+ * Hardware Features
+	* ROHM RPM-075PT Phototransistor
+		* Peak sensitivity matches MicroPeak LED color
+	* [ST Micro TSV521](http://www.st.com/internet/analog/product/251123.jsp) CMOS op-amp
+		* Low power
+	* [FTDI FT230](http://www.ftdichip.com/Products/ICs/FT230X.html) Serial to USB adapter
+		* Drivers available for Linux, Mac OS X and Windows.
+
+ * Tools Used
+	* [gEDA](http://www.gpleda.org/) for schematic capture and PCB layout
+
+ * Licenses
+	* The hardware is licensed under the [TAPR](http://www.tapr.org) [Open Hardware License](http://www.tapr.org/ohl.html)
+
+<center><img src="../logos/micropeak.svg" height="64"/>
diff --git a/MicroPeak/index.mdwn b/MicroPeak/index.mdwn
index ee4d7a5..05e432e 100644
--- a/MicroPeak/index.mdwn
+++ b/MicroPeak/index.mdwn
@@ -11,7 +11,7 @@ src="v1.0/micropeak-dime-640.jpg"></a>
 
 Production units are available from the
 [Garbee and Garbee](http://auric.gag.com/index.php?route=product/product&product_id=80) 
-web store 
+web store and [Apogee Components](http://www.apogeerockets.com/Electronics_Payloads/Altimeters/MicroPeak_Altimeter)
 
 ## Documentation ##
 
@@ -67,7 +67,7 @@ Here's a close-up view of the hardware
 	* Written in C
 	* Samples pressure every 96ms
 	* Delay 30s after power-on to finish airframe prep
-	* Detect boost with 20m altitude change
+	* Detect boost with 10m altitude change
 	* Exponential averaging filter to minimize transient effects.
 
  * Tools Used
diff --git a/index.mdwn b/index.mdwn
index 0502ad9..0ab47e3 100644
--- a/index.mdwn
+++ b/index.mdwn
@@ -68,6 +68,10 @@ is a higher-performance alternative to [TeleDongle](TeleDongle/).
 is a high-end flight computer with 6 pyro channels, more and better sensors,
 GPS, and a high performance bidirectional RF telemetry link.
 
+* [MicroPeak Serial Interface](MPSerial/)
+provides an interface between [MicroPeak](MicroPeak/) and USB to
+download flight log data.
+
 * [OpenAlt](OpenAlt/)
 was Bdale's original project here, a dual-deploy rocketry altimeter.  One 
 prototype was built, but never flown.  This project is now indefinitely on hold.