diff options
| author | Bdale Garbee <bdale@gag.com> | 2010-02-06 13:00:08 -0700 |
|---|---|---|
| committer | Bdale Garbee <bdale@gag.com> | 2010-02-06 13:00:08 -0700 |
| commit | 0c51c11ac2ad0474808b276b366709f7b83588e2 (patch) | |
| tree | b50ba1efd70d6fc5622709e45991234f9739830d | |
| parent | 415edfec216fb96e224120de746155cc652a4c1b (diff) | |
more cosmetics
| -rw-r--r-- | TeleMetrum/index.mdwn | 6 |
1 files changed, 3 insertions, 3 deletions
diff --git a/TeleMetrum/index.mdwn b/TeleMetrum/index.mdwn index a98fcac..a7f4aba 100644 --- a/TeleMetrum/index.mdwn +++ b/TeleMetrum/index.mdwn @@ -120,14 +120,14 @@ always want GPS on board, which lead to our current second generation boards. * The v0.1 artwork had three issues, two of which required physical rework on each board. All of these issues were fixed in v0.2. - * the USB connector footprint was placed wrong, so that the + * The USB connector footprint was placed wrong, so that the connector hung out over the edge of the board instead of being flush. - * we needed chip select on the SPI memory. To fix that, we gave up the + * We needed chip select on the SPI memory. To fix that, we gave up the ability to put the accelerometer into self-test mode and used that GPIO line to pull chip select on the memory, which required two cuts and two jumpers. - * the igniter sense circuits each needed a second resistor to + * The igniter sense circuits each needed a second resistor to complete the voltage divider so our 3.3V CPU ADC could read the 5V ejection voltage. This was fixed by changing two resistor values, and tacking two additional resistors onto the board |