summaryrefslogtreecommitdiff
path: root/src
Commit message (Expand)AuthorAge
* altos/stm: Validate current task SP in interrupt by looking at PSPKeith Packard2016-03-26
* altos/stm: Run scheduler code on interrupt stackKeith Packard2016-03-26
* altos/stmf0: Construct .bin files for flash loadersKeith Packard2016-03-18
* altos: Expose fast timer API from kernel/Keith Packard2016-03-18
* altos: Fixed timing of panic display LED to be readableBart Massey2016-03-07
* altos/stmf0: Fix build without second USB IN endpointKeith Packard2016-03-05
* altos: Add ChaosKey v1.0 productKeith Packard2016-03-02
* altos/chaoskey: Add another USB endpoint to read raw dataKeith Packard2016-03-02
* altos/chaoskey: Use SoC device ID as serial numberKeith Packard2016-02-15
* altos/stmf0: Use device ID as usb serial number if requestedKeith Packard2016-02-15
* altos/chaoskey: Encode both hardware and software versions in product IDKeith Packard2016-02-15
* altos/stmf0: Fix location of device_id registerKeith Packard2016-02-15
* altos: Another fix for non CDC-ACM devicesKeith Packard2016-02-08
* Clean up stmf0 adc init.Bart Massey2016-02-08
* altos/stmf0: Add missing ao_gpio.cKeith Packard2016-02-07
* altos: Add simple stats test to TRNG codeKeith Packard2016-02-07
* altos: Delay TRNG ADC long enough for HV supply to stabilizeKeith Packard2016-02-07
* altos/chaoskey-v0.1: Add power management and change USB classesKeith Packard2016-02-07
* altos: Add power management to TRNG driverKeith Packard2016-02-07
* altos: Allow USB drivers to skip CDC-ACM -specific descriptorsKeith Packard2016-02-07
* altos/stmf0: Add suspend/resume supportKeith Packard2016-02-07
* altos: Add power management APIsKeith Packard2016-02-07
* altos/stmf0: Allow projects to specify non-default stack sizeKeith Packard2016-02-07
* altos: remove blank line in stmf0/ao_timer.cKeith Packard2016-02-07
* altos/chaoskey: Delay ADC reading for 250ms at startupKeith Packard2016-01-28
* altos/chaoskey: Add support for flipping between raw and cooked bitsKeith Packard2016-01-28
* src/chaoskey-v0.1: Add HV enable supportKeith Packard2016-01-19
* altos: Switch PWM constants to end up exposing µsecKeith Packard2016-01-10
* altos: Set TeleMega v2.0 PWM to support servosKeith Packard2016-01-10
* altos: Insert inter telemetry-packet delayKeith Packard2016-01-10
* Switch TeleMega v2.0 to CC1200 radio chiptelemega-v2Keith Packard2016-01-09
* altos: Set AO_PWM_TIMER_SCALE for telemega-v2.0Keith Packard2015-12-25
* altos: Get stm32l pwm driver workingKeith Packard2015-12-25
* altos: Add TeleMega v2.0, including PWM driverKeith Packard2015-12-25
* telelco: Fix pad reset to one on radio signal lossKeith Packard2015-10-13
* altos/telelco: Adjust drag race UIKeith Packard2015-10-13
* altos/telelco: Add drag race UIKeith Packard2015-08-29
* altos/telelco: Infrastructure changes for drag racingKeith Packard2015-08-29
* altos: Provide direct segment driving interface for LCD displaysKeith Packard2015-08-29
* altos/telefire: No reply for ARMED. Ignore time for FIRE.Keith Packard2015-08-29
* altos: Add HAS_COMPANION to new boards with companion connectorsKeith Packard2015-08-20
* altos/telebt-v3.0: Report battery voltage correctlyKeith Packard2015-06-25
* altos/telelco: Show box voltage with pad knob instead of firing buttonKeith Packard2015-05-25
* altos/telelco: Display telefire battery voltageKeith Packard2015-05-25
* altos: Add telelco v0.3 (v0.2 with cc1200 instead of cc1120)Keith Packard2015-05-25
* telefire: Report telefire battery voltage over telemetry linkKeith Packard2015-05-25
* altos: Only set CMAC RSSI value on valid packet receivedKeith Packard2015-05-24
* telefire: Make 'good' RSSI value configurableKeith Packard2015-05-24
* micropeak: Use fast load mode by default in -load scriptKeith Packard2015-05-19
* microsplash: Add 'publish' target to MakefileKeith Packard2015-05-19
generated by cgit v1.2.3 (git 2.39.1) at 2026-01-09 04:43:09 +0000