summaryrefslogtreecommitdiff
path: root/src
Commit message (Expand)AuthorAge
* altos: Try a different carrier generation plantelemegaKeith Packard2013-05-15
* altos: Crank up the test mode deviation to see if it's using itKeith Packard2013-05-15
* altos: More radio hacking to try and generate a pure carrier.Keith Packard2013-05-15
* altos: More attempts to get the carrier steady.Keith Packard2013-05-15
* altos: Use soft TX mode with 0 deviation to test the cc1120 TXKeith Packard2013-05-15
* altos: Disable cc1120 preamble for RDF and APRS modesKeith Packard2013-05-15
* altos: Set cc1120 to RDF mode when testing radio to try and turn off modulationKeith Packard2013-05-15
* altos: Move MS5607 info from 'v' to 'c s'Keith Packard2013-05-15
* altos: Remove some MMA655x debugging printfsKeith Packard2013-05-14
* altos: Mess around with MPU6000 init some moreKeith Packard2013-05-14
* altos: mpu6000 was getting spi mutex twiceKeith Packard2013-05-14
* altos: Oops. left out ao_gps_show.cKeith Packard2013-05-14
* altos: Try to fix MPU6000 SPI modeKeith Packard2013-05-14
* altos: Split out gps display function to separate fileKeith Packard2013-05-14
* altos: Add 3 second delay to let mpu6000 come to lifeKeith Packard2013-05-14
* altos: Remove MPU6000 debuging hacksKeith Packard2013-05-14
* altos: Initialize MPU6000 CS pin for SPI modeKeith Packard2013-05-14
* altos: MPU6000 debug hackingKeith Packard2013-05-14
* altos: Fix telemega v0.3 igniter order (drogue/main moved). Label ADC dumpKeith Packard2013-05-14
* altos: gps serial routines are called ao_gps_*, not ao_ublox_*Keith Packard2013-05-14
* altos: Give u-blox 3 seconds after boot before we bug itKeith Packard2013-05-14
* altos: Add 'g' command to ublox GPS code.Keith Packard2013-05-14
* altos: Disable MPU6000 for testingKeith Packard2013-05-14
* altos: Set u-blox navigation settingsKeith Packard2013-05-14
* altos: Use symbolic names for ublox packet idKeith Packard2013-05-14
* altos/test: ao_gps_test_ublox uses ao_gps_blox.hKeith Packard2013-05-13
* altos: Struct used for u-blox testing had lat/lon swappedKeith Packard2013-05-13
* altos: Switch TeleMega v0.3 to u-bloxKeith Packard2013-05-13
* altos: Provide a define for the number of sat infos in a telem packetKeith Packard2013-05-13
* altos: Add U-Blox GPS driverKeith Packard2013-05-13
* altos: Don't bother fixing telelco-v0.1, just disable itKeith Packard2013-05-13
* altos: Wait after configuring boot pin before testing itKeith Packard2013-05-07
* altos/stm: Create per-product flash loadersKeith Packard2013-05-07
* altos: Add ao_boot_chain to telemega v0.3Keith Packard2013-05-07
* altos: Remove stdio from stm-flashKeith Packard2013-05-07
* altos: Get rodata into flash, make sure sections are alignedKeith Packard2013-05-07
* altos: Make stm-bringup build againKeith Packard2013-05-07
* altos: Run self loader when application sets boot addr to 0Keith Packard2013-05-07
* altos: Allow STM usb driver to be used without stdioKeith Packard2013-05-07
* altos/stm-flash: Check target flash address against AO_BOOT_APPLICATION_BASEKeith Packard2013-05-07
* altos: Use flash loader on all STM productsKeith Packard2013-05-07
* altos/stm: Provide another 4kB of flash space for appsKeith Packard2013-05-07
* altos/stm: Shrink stm flash loader to < 4kBKeith Packard2013-05-07
* altos/stm: Allow core timer to be excluded from buildKeith Packard2013-05-07
* altos/stm: Don't define task macros when not taskingKeith Packard2013-05-07
* altos: Eliminate stdio looping when system has a single stdio sourceKeith Packard2013-05-07
* altos: Move ao_notask to coreKeith Packard2013-05-07
* altos/stm: Add comments to the .ld files explaining how the romconfig stuff w...Keith Packard2013-05-07
* altos/stm: Add .elf to .ihx ruleKeith Packard2013-05-07
* altos: Switch ao_stm_flash to read/write binary blocksKeith Packard2013-05-07
generated by cgit v1.2.3 (git 2.39.1) at 2025-12-25 10:00:44 +0000