summaryrefslogtreecommitdiff
path: root/src/lpc
Commit message (Expand)AuthorAge
* Merge branch 'master' into telegps-v0.3Keith Packard2013-08-25
|\
| * altos: Wake up on LPC usart ISR only onceKeith Packard2013-08-25
| * altos: Set default LPC stack to 512 bytes, Em to 384 bytesKeith Packard2013-08-25
| * altos: Use installed arm compiler for LPCKeith Packard2013-08-25
| * altos/lpc: Stop using burst mode for LPC ADCKeith Packard2013-08-25
* | altos: Wake up on LPC usart ISR only onceKeith Packard2013-08-17
* | altos: Set default LPC stack to 512 bytes, Em to 384 bytesKeith Packard2013-08-17
* | altos/lpc: Rename serial port to 'serial0'Keith Packard2013-07-02
|/
* altos/lpc: Add boot loaderKeith Packard2013-06-24
* altos/lpc: Don't disable all interrupts when disabling one interruptKeith Packard2013-06-22
* altos/lpc: Remove ao_usb_task structureKeith Packard2013-06-22
* altos/lpc: Enable brown-out-detectorKeith Packard2013-06-22
* altos/lpc: Get rid of ADC filterKeith Packard2013-06-17
* altos/lpc: Get the IRC turned off after boot timeKeith Packard2013-06-17
* altos/lpc: Remove spurious semicolonKeith Packard2013-06-16
* altos/lpc: Don't disable all of the clocks just yet, USB doesn't workKeith Packard2013-06-16
* altos/lpc: Turn off more clocks, disable USART for easyminiKeith Packard2013-06-16
* altos/lpc: Filter ADC inputsKeith Packard2013-06-15
* altos/lpc: Make ADC inputs workKeith Packard2013-06-15
* altos/lpc: Force idle mode if USB gets an address during boot timeKeith Packard2013-05-19
* altos/lpc: Reset SPI device at startup timeKeith Packard2013-05-19
* altos/lpc: Configuring wrong pin for SPI1 MOSIKeith Packard2013-05-19
* altos/lpc: Allow for alternate SPI SCLK0 pin usageKeith Packard2013-05-19
* altos/lpc: Leave SPI enabled all the timeKeith Packard2013-05-19
* altos/lpc: Create TX/RX busy macros for SPI driverKeith Packard2013-05-19
* altos/lpc: Fix beeper driverKeith Packard2013-05-19
* altos/lpc: Missing parens around ao_gpio_set macroKeith Packard2013-05-19
* altos/lpc: SPI runs off main clock (48MHz), not sysclk (24MHz)Keith Packard2013-05-19
* altos/lpc: Pull ADC data from the correct registersKeith Packard2013-05-19
* altos/lpc: Don't use loader to place USB endpoint data in USB ramKeith Packard2013-05-19
* altos: Add EXTI_PIN_NOCONFIGURE to exti interface, use for MS5607Keith Packard2013-05-19
* altos/lpc: Make EXTI code work.Keith Packard2013-05-19
* altos/lpc: Stick USB control structure in USB memoryKeith Packard2013-05-18
* altos/lpc: Use separate interrupt stackKeith Packard2013-05-18
* altos/lpc: Try a smaller stack.Keith Packard2013-05-18
* altos/lpc: Add pin interrupt driverKeith Packard2013-05-18
* altos/lpc: Add beep driverKeith Packard2013-05-18
* altos/lpc: Add ADC driverKeith Packard2013-05-18
* altos/lpc: add gpio int, spi, adc and ct32b defines to lpc.hKeith Packard2013-05-18
* altos/lpc: Clean up broken IOCONF definesKeith Packard2013-05-18
* altos/lpc: Fix ao_enable_input, add ao_enable_analogKeith Packard2013-05-18
* altos: LPC interrupt priorities are just 0-3Keith Packard2013-05-18
* altos: Add LPC spi driverKeith Packard2013-05-18
* altos/lpc: Get USB workingKeith Packard2013-05-17
* altos: Finish off LPC USB register definitionsKeith Packard2013-05-17
* altos/lpc: Start adding USB register definesKeith Packard2013-05-17
* altos/lpc: Start adding USB register definitionsKeith Packard2013-05-17
* altos/lpc: Take advantage of USART TX fifoKeith Packard2013-05-17
* altos/lpc: Get USART runningKeith Packard2013-05-17
* altos/lpc: Get 100Hz timer runningKeith Packard2013-05-17
generated by cgit v1.2.3 (git 2.39.1) at 2025-12-25 19:05:55 +0000