summaryrefslogtreecommitdiff
path: root/src/kernel
Commit message (Expand)AuthorAge
* altos: Only set CMAC RSSI value on valid packet receivedKeith Packard2015-05-24
* altos: Add the ability to configure a different USB vendor IDKeith Packard2015-03-19
* altos: Missing pad field in TMv2 data packetKeith Packard2015-03-02
* altos: Make APRS format (compressed/uncompressed) configurableKeith Packard2015-03-02
* altos: Allow software to offer other USB interface classes than CDCKeith Packard2015-02-28
* altos: embed ao_alarm and ao_clear_alarm in ao_sleep_forKeith Packard2015-02-14
* altos: Replace ao_alarm/ao_clear_alarm with ao_sleep_forKeith Packard2015-02-13
* altos: Separate out ao_tracker force from dbgKeith Packard2015-02-07
* altos: Always include a check for stdio overflowKeith Packard2015-02-01
* altos/stmf0: Re-implement fast ADC code for stmf0Keith Packard2015-01-27
* altos: Add support for TeleBT v3.0Keith Packard2015-01-24
* altos: Get rid of some accidental debug codeKeith Packard2015-01-22
* Set version to 1.5.9.11.5.9.1Keith Packard2015-01-16
* altos: Allow TeleMega to be built without MPU6000Keith Packard2014-11-16
* altos: Use other TeleDongle LED for CRC-invalid packet reportingKeith Packard2014-11-06
* altos: Declare port register type only in arch headerKeith Packard2014-11-06
* altos: Fix up telemetry delay computationsKeith Packard2014-10-25
* altos: Remove old AO_SEND_ALL_BARO bitsKeith Packard2014-10-25
* altos: Sort out ao_gps_print altitude fetchingKeith Packard2014-10-25
* altos: Expose telemetry altitude macros even without GPSKeith Packard2014-10-24
* altos: Fix syntax error with ao_log_mega change.Keith Packard2014-10-04
* altos: Record 32-bits for gyro calibration valuesKeith Packard2014-10-04
* altos: Make sure we don't beep out continuity twice in idle modeKeith Packard2014-09-11
* altos: Fix ability to disable telemetry by setting interval to 0Keith Packard2014-09-11
* altos: Allow negative values for pyro configuration dataKeith Packard2014-09-03
* altos: Don't add AO_LOG_FLIGHT to existing GPS logsKeith Packard2014-09-01
* altos: Make sure pyro remains valid during delayKeith Packard2014-08-29
* altos: Add telerepeat-v1.0Keith Packard2014-08-17
* telegps-v1.0: Provide one log and append to itKeith Packard2014-08-17
* altos: Report additional pyro channels via beeperKeith Packard2014-08-14
* altos: Have MicroKite just start recording at startupKeith Packard2014-08-14
* altos: Make ao_gps_print deal with telem containing 32-bit altitude valuesKeith Packard2014-07-13
* altos: Interrupt radio receive when changing data rateKeith Packard2014-07-13
* altos: Use 32-bits for flight state data (alt/speed/accel)Keith Packard2014-07-10
* altos: Record pdop value in TeleMetrumV2 logKeith Packard2014-07-10
* altos: Extend GPS altitudes to at least 24 bits everywhereKeith Packard2014-07-10
* altos: Add smaller pa to altitude table for TeleMiniKeith Packard2014-07-09
* altos/telemini-v2.0: Add memory decorations to new telemetry variablesKeith Packard2014-07-09
* Add support for the "kite" micropeak variantKeith Packard2014-07-06
* altos: Rework packet receive for cc1120Keith Packard2014-07-05
* altos: Call ao_telemetry_reset_interval when telemetry rate changesKeith Packard2014-07-05
* altos: Add config support for 2400 and 9600 baud telemetry ratesKeith Packard2014-07-05
* altos: Add defines for 2400 and 9600 baud telemetry ratesKeith Packard2014-07-05
* altos: Reduce configuration data telemetry to once per 5 secondsKeith Packard2014-07-05
* altos: Use TeleMetrum v1.9 board for MegaDongle experimentsKeith Packard2014-07-05
* altos: ao_rssi subsystem needs to use AO_LED_TYPE instead of uint8_tKeith Packard2014-07-05
* altos: Add optional debugging to print out pyro firing statusKeith Packard2014-06-24
* altos: Make APRS SSID configurableKeith Packard2014-06-22
* altos/telegps: Create new flight if current flight is erasedKeith Packard2014-06-12
* altos: Define ao_log_mutex in ao_log.c rather than every log productKeith Packard2014-06-12