summaryrefslogtreecommitdiff
path: root/src/drivers
Commit message (Expand)AuthorAge
* altos: Use simpler debounce logic for buttonstelelaunchtwoKeith Packard2015-12-25
* altos: Add ao_lco_two.c; alternate LCO interface codeKeith Packard2015-12-25
* altos: Allow for pad boxes with different sensor configurationsKeith Packard2015-12-23
* altos: Add pad support for new telefire versionsKeith Packard2015-12-23
* altos: Support telefire products in cc1200 driverKeith Packard2015-12-23
* telelco: Fix pad reset to one on radio signal lossKeith Packard2015-10-13
* altos/telelco: Adjust drag race UIKeith Packard2015-10-13
* altos/telelco: Add drag race UIKeith Packard2015-08-29
* altos/telelco: Infrastructure changes for drag racingKeith Packard2015-08-29
* altos: Provide direct segment driving interface for LCD displaysKeith Packard2015-08-29
* altos/telefire: No reply for ARMED. Ignore time for FIRE.Keith Packard2015-08-29
* altos: Add HAS_COMPANION to new boards with companion connectorsKeith Packard2015-08-20
* altos/telelco: Show box voltage with pad knob instead of firing buttonKeith Packard2015-05-25
* altos/telelco: Display telefire battery voltageKeith Packard2015-05-25
* altos: Add telelco v0.3 (v0.2 with cc1200 instead of cc1120)Keith Packard2015-05-25
* telefire: Report telefire battery voltage over telemetry linkKeith Packard2015-05-25
* telefire: Make 'good' RSSI value configurableKeith Packard2015-05-24
* altos: Support 32MHz xtal on cc1200Keith Packard2015-05-19
* altos/stmf0: Have fast ADC ring buffer code use wrap-aroundKeith Packard2015-03-20
* altos/test: Make aprs test code compile againKeith Packard2015-03-10
* altos: Wait for BT disconnect before sending commandKeith Packard2015-03-02
* altos: Make APRS format (compressed/uncompressed) configurableKeith Packard2015-03-02
* altos/usbtrng: Split out random number generating code to separate driverKeith Packard2015-02-28
* altos: Add chaoskey flash loaderKeith Packard2015-02-28
* altos: Remove some accidental debug printfs from ao_packet.cKeith Packard2015-02-15
* altos/cc1200: Adjust bit-sync configurationKeith Packard2015-02-14
* altos: Replace ao_alarm/ao_clear_alarm with ao_sleep_forKeith Packard2015-02-13
* altos: ao_packet_getchar needs to return 'int' so AO_READ_AGAIN worksKeith Packard2015-02-07
* altos/drivers: Increase SPI speed of CC115L to 6MHzKeith Packard2015-02-07
* altos/btm: Add fancier debug. Pull serial reset port low.Keith Packard2015-02-01
* altos: Add support for TeleBT v3.0Keith Packard2015-01-24
* altos: Adjust CC1200 RSSI reporting valueKeith Packard2014-12-22
* altos: Document cc115l power measured at RF setting 0x03 as -31.75dBmKeith Packard2014-12-22
* altos/cc1200: With PQT wide open, we can't use PQT_REACHED for startKeith Packard2014-11-23
* altos/cc1200: Open up preamble detect to improve sensitivityKeith Packard2014-11-23
* altos/cc1200: Wait for packet to be placed in FIFO during receiveKeith Packard2014-11-23
* altos: Reset interrupt flags before TX in CC1200 driverKeith Packard2014-11-06
* altos: Use AO_SPO_SPEED_FAST for CC1200Keith Packard2014-11-06
* altos: Stop attempting to ramp power on CC115LKeith Packard2014-11-06
* altos: Increase CC1200 SPI data rate to 8MHzKeith Packard2014-10-25
* altos: Perform cc1200 calibration less often. Tweak radio paramsKeith Packard2014-10-25
* altos: Increase PQT value for cc1200 improving sensitivityKeith Packard2014-10-25
* altos: Complete cc1200 driverKeith Packard2014-10-24
* altos: Copy cc1120 driver to cc1200 driver and hack a bitKeith Packard2014-10-05
* altos: Make sure we drop the SPI mutex when aborting cc1120 recvKeith Packard2014-09-26
* altos: Scale packet master receive delay by baud rateKeith Packard2014-09-06
* altos: Reduce deviation at 2400/9600 baudKeith Packard2014-09-06
* altos/telefire: Add firing length to manual pad commandKeith Packard2014-09-03
* altos/telefire,telelco: Add HAS_RADIO_RATE to launch system softwareKeith Packard2014-07-12
* altos: Scale DOP values by 10 in GPS driversKeith Packard2014-07-10
generated by cgit v1.2.3 (git 2.39.1) at 2025-12-24 19:39:53 +0000