summaryrefslogtreecommitdiff
path: root/src/drivers
Commit message (Expand)AuthorAge
* altos: various cc115l driver hacksKeith Packard2013-08-20
* altos: Allow ublox to run at other baud ratesKeith Packard2013-08-17
* altos: Remove ao_radio_gpio_bits from normal buildKeith Packard2013-07-02
* altos/telefire: Radio status (no data, weak data, good data) on LEDsKeith Packard2013-06-19
* altos: PCA9922 LED driver needs Enable driven low to latch valuesKeith Packard2013-06-19
* altos: Declare m25 write-in-progress as 'ao_port_t'Keith Packard2013-06-16
* altos: Add fast-timer API. Use for quadrature and button driversKeith Packard2013-06-09
* altos: Add debounce helper. Use in button and quadrature drivers for TeleLCOKeith Packard2013-06-09
* altos/telefire: Leave siren on all the time. Add siren/strobe debugging.Keith Packard2013-06-09
* altos: Add telefire v0.2 supportKeith Packard2013-06-09
* altos: Add driver for 74hc165 shift registerKeith Packard2013-06-09
* altos: Add EXTI_PIN_NOCONFIGURE to exti interface, use for MS5607Keith Packard2013-05-19
* altos: Use ao_spi_get/put_bit in MS5607 driverKeith Packard2013-05-19
* altos: Use ao_port_t in m25 driverKeith Packard2013-05-18
* altos: Generate unmodulated carrier for CC1120 test modeKeith Packard2013-05-15
* altos: Remove some MMA655x debugging printfsKeith Packard2013-05-15
* altos: Grab SPI mutex until MPU6000 I2C mode is disabledKeith Packard2013-05-15
* altos: Initialize MPU6000 CS pin for SPI modeKeith Packard2013-05-15
* altos: gps serial routines are called ao_gps_*, not ao_ublox_*Keith Packard2013-05-15
* altos: Give u-blox 3 seconds after boot before we bug itKeith Packard2013-05-15
* altos: Add 'g' command to ublox GPS code.Keith Packard2013-05-15
* altos: Set u-blox navigation settingsKeith Packard2013-05-14
* altos: Use symbolic names for ublox packet idKeith Packard2013-05-14
* altos: Struct used for u-blox testing had lat/lon swappedKeith Packard2013-05-13
* altos: Add U-Blox GPS driverKeith Packard2013-05-13
* altos: Elide M25 debug output from storage info commandKeith Packard2013-05-07
* altos: Set APRS deviation to 3kHzKeith Packard2013-05-07
* altos: Reduce stack usage of FAT driver and loggerKeith Packard2013-05-07
* altos: Make cc1120 driver return false on recv timeoutKeith Packard2013-05-07
* altos: Reconfigure CC1120 receiver to match our usageKeith Packard2013-05-07
* altos: Compute "real" RSSI value in radio code as neededKeith Packard2013-05-07
* altos: Allow LCD segments to not be multiplexed across digitsKeith Packard2013-05-07
* altos: Clear any broken cc1120 TX fifo bits before transmittingKeith Packard2013-05-07
* altos: Make cc1120 driver wait for TX finishedKeith Packard2013-05-07
* altos: Provide timeout value to ao_radio_recvKeith Packard2013-05-07
* altos: Add TeleMega v0.3 supportKeith Packard2013-04-25
* altos: Add MR25 everspin MRAM driverKeith Packard2013-04-25
* altos: Make SD card driver compile without radio supportKeith Packard2013-04-25
* name change from MegaMetrum to TeleMegaBdale Garbee2013-04-22
* altos: Make sure the packet format is set reasonably for radio testKeith Packard2013-04-12
* altos: Don't include bufio debug commands by defaultKeith Packard2013-04-12
* altos: Stick a mutex around FAT operationsKeith Packard2013-04-12
* altos: Delay while waking up SD card a bitKeith Packard2013-04-12
* altos: Create telebt-v1.0 product. Remove old telebt productsKeith Packard2013-04-08
* altos: Try RDF mode for TX calibrationKeith Packard2013-04-06
* altos: Shorten SD initialization timeouts.Keith Packard2013-04-02
* altos: Horrible kludge -- disable radio while talking with SD cardKeith Packard2013-04-01
* altos: Retry SD card I/O. Use time for timeouts instead of countsKeith Packard2013-04-01
* altos: Support open on multiple simultaneous FAT filesKeith Packard2013-04-01
* altos: Make sure FAT cluster allocation works for size zero filesKeith Packard2013-04-01
generated by cgit v1.2.3 (git 2.39.1) at 2026-01-03 07:34:04 +0000