summaryrefslogtreecommitdiff
path: root/src/drivers
Commit message (Expand)AuthorAge
* altos/micropeak: Run MS5607 at max resolution for micropeakKeith Packard2012-10-30
* altos: Switch drivers to ao_arch_block/release_interruptsKeith Packard2012-10-25
* altos: Replace __critical usage with ao_arch_critical as neededKeith Packard2012-10-25
* altos: profiling on STM32LKeith Packard2012-10-25
* altos: When slave mode first starts, accept any packetKeith Packard2012-10-25
* Merge branch 'master' into mm-ms5611Keith Packard2012-10-18
|\
| * altos/telelco: 10ms is not enough time to get a packet backKeith Packard2012-10-15
| * altos/telelco: Crank up SPI speed to cc1111Keith Packard2012-10-15
| * altos/telefire: Report valid channels instead of valid pinsKeith Packard2012-10-14
| * altos: Define full-scale gyro and accel values for MPU6000Keith Packard2012-10-13
| * altos: Split out ms5607 conversion code for use in ao_flight_testKeith Packard2012-10-13
| * altos: Add (untested) driver for AT24C i2c flash partsKeith Packard2012-10-12
| * altos: Prepare ms5607 driver for use in non-tasking productsKeith Packard2012-10-12
| * altos/telefire: Add siren/strobe supportKeith Packard2012-10-10
| * altos/telefire: Make sure armed alarm goes off on timeKeith Packard2012-10-06
* | altos: Fix up ms5607 and mma655x commands to work againKeith Packard2012-10-08
* | altos: Go back to recording sensor data in globalsmm-ms5611Keith Packard2012-10-08
* | altos/drivers: Use data ring values for MS5607 presentationKeith Packard2012-10-06
|/
* altos: Re-enable the ms5607 and mma655x acquisition threadsKeith Packard2012-10-03
* altos: Provide MS5611 configuration option, HAS_MS5611Keith Packard2012-10-03
* altos/telelco: Search for available firing nodes at boot timeKeith Packard2012-09-09
* altos/telefire: Add steady warble when the LCO arm switch is onKeith Packard2012-09-09
* altos: Try to get remote cmac time closer to realityKeith Packard2012-09-09
* altos: Fix radio slave to run lights in the normal wayKeith Packard2012-09-06
* altos: Get mma655x driver limping alongKeith Packard2012-08-31
* altos: Add custom panic noise for self-test failuresKeith Packard2012-08-31
* altos: Shuffle LCO functions around, add telelco first cutKeith Packard2012-08-30
* altos: Disable debug printfs and fix pad ignite time for telefireKeith Packard2012-08-30
* altos: SPI radio - use 1->0 for 'done' and 0->1 for 'ready'Keith Packard2012-08-29
* altos: fix ao_pad debug output for query commandKeith Packard2012-08-29
* altos: Use updated pad protocol for lco commandsKeith Packard2012-08-29
* altos: Mostly working SPI radio linkKeith Packard2012-08-28
* altos: Track protocol changes to ao_pad debug messagesKeith Packard2012-08-28
* altos: Stop providing debug commands in seven-segment driverKeith Packard2012-08-28
* altos: Move radio_cmac test funcs from ao_lco_cmd.c to new fileKeith Packard2012-08-28
* altos: Add SPI linked radio APIKeith Packard2012-08-27
* altos: Clean up radio APIsKeith Packard2012-08-27
* altos: Test multiple quadrature devices. Export quadrature count.Keith Packard2012-08-27
* altos: Seven segment display driverKeith Packard2012-08-27
* altos: Rename drivers/ao_lco to drivers/ao_lco_cmdKeith Packard2012-08-27
* altos: Trigger sample complete when all data are readyKeith Packard2012-08-26
* altos: Make 'pad' driver useful with telefire v0.1Keith Packard2012-08-26
* altos: Add debug command for 74hc597 driverKeith Packard2012-08-26
* altos: Get ao_pad.c working on telefire v0.1Keith Packard2012-08-24
* altos: Split out LCO functions from ao_radio_cmac.c to ao_lco.cKeith Packard2012-08-24
* altos: Add 'ao_led_set_mask' in the PCA9922 driverKeith Packard2012-08-24
* altos: Disable telefire 'pad' listener when testing radioKeith Packard2012-08-24
* Here's the button driver and event queue logicKeith Packard2012-08-18
* altos: Add MMA655X driverKeith Packard2012-08-18
* altos: Use split SPI bus for MS5607 sensorKeith Packard2012-08-18
generated by cgit v1.2.3 (git 2.39.1) at 2025-12-27 20:29:57 +0000