summaryrefslogtreecommitdiff
path: root/src/ao_radio.c
Commit message (Expand)AuthorAge
* altos: remove monitor disable stubs from altimeter codeKeith Packard2011-08-11
* altos: Add ability to set arbitrary radio frequencyKeith Packard2011-08-08
* altos: teledongle does not need ao_packet_slave.cKeith Packard2011-07-04
* altos: Rename telemetry to telemetry_origKeith Packard2011-06-27
* altos: Configure packet size from send/recv parameters.Keith Packard2011-03-19
* src/ao_cmd: Shave off bytes from doc stringsAnthony Towns2011-03-07
* ao_radio: generalise setup of packet sizeAnthony Towns2011-02-18
* altos: eliminate ao_wake_taskKeith Packard2010-12-22
* altos: clean up radio abort paths. Share radio code.Keith Packard2010-12-22
* Revert "altos: Don't abort radio transmissions with ao_radio_abort"Keith Packard2010-11-25
* altos: Make radio test command careful with the radio mutex.Keith Packard2010-11-23
* altos: Don't abort radio transmissions with ao_radio_abortKeith Packard2010-11-23
* altos: Add on/off modes to 'C' commandKeith Packard2010-11-21
* altos: prepare for sdcc 2.9.1Keith Packard2010-08-27
* Make ao_radio_idle keep trying to get the radio to idle.Keith Packard2010-04-04
* Disable monitor mode before attempting radio test.Keith Packard2009-12-19
* Use ao_radio_get/ao_radio_put in packet code.Keith Packard2009-12-19
* Re-order config values. Change frequency to calKeith Packard2009-12-05
* Add radio calibration configuration.Keith Packard2009-12-04
* Remove reason from ao_dma_abortKeith Packard2009-10-30
* Wait for TX to finish sending dataKeith Packard2009-10-30
* Add radio carrier commandKeith Packard2009-10-30
* Initial packet bits. Just testing transmissionKeith Packard2009-10-30
* Set all of the values to reset the radio for telemetryKeith Packard2009-09-04
* Make RDF beacon only run on pad and after landing.Keith Packard2009-09-04
* Add back the RDF tone generatorKeith Packard2009-09-04
* Use autotools, move altos to src subdirKeith Packard2009-06-04
generated by cgit v1.2.3 (git 2.39.1) at 2025-10-18 10:43:21 +0000