summaryrefslogtreecommitdiff
path: root/src/ao.h
Commit message (Expand)AuthorAge
* altos: Hook up the P1 ISR for TeleBT v0.1 bt_link lineKeith Packard2011-05-06
* altos: Solidify BT connectionsKeith Packard2011-04-19
* altos: Use PIO(6) on BTM to monitor BT connection. Fix BTM init.Keith Packard2011-04-07
* altos: Make cmd echo per-connection instead of globalKeith Packard2011-04-01
* altos: Make ao_serial_drain publicKeith Packard2011-04-01
* altos: Provide for a pre-filter on commandsKeith Packard2011-04-01
* altos: expose set of available stdio valuesKeith Packard2011-04-01
* altos: Add initial TeleBT codeKeith Packard2011-03-31
* altos: Create custom nano flight codeKeith Packard2011-03-28
* altos: Split up flight code into separate flight/sample/kalman bitsKeith Packard2011-03-28
* altos: Switch telemetrum over to kalman filterKeith Packard2011-03-22
* altos: New telemetry report format (version 4). Supports tiny telemetry.Keith Packard2011-03-19
* altos: Split out tiny telemetry from full telemetryKeith Packard2011-03-19
* altos: Make telemetry interval more consistentKeith Packard2011-03-19
* altos: Configure packet size from send/recv parameters.Keith Packard2011-03-19
* altos: Don't init packet slave on TD. Make slave start optionalKeith Packard2011-03-19
* altos: Write height values to log for nano/miniKeith Packard2011-03-18
* altos: Add tiny logging for TeleMini/TeleNanoKeith Packard2011-03-17
* altos: Make serial, usb, beeper and accelerometer optional componentsKeith Packard2011-03-16
* src/ao_cmd: Shave off bytes from doc stringsAnthony Towns2011-03-07
* ao_radio: generalise setup of packet sizeAnthony Towns2011-02-18
* altos: Sample the accelerometer reference voltage on v1.1 boardsKeith Packard2011-01-16
* altos: Ensure flight code gets first crack at new ADC dataKeith Packard2011-01-16
* altos: TELEMETRY PROTOCOL CHANGE. Switch to 16-bit serial numbers.Keith Packard2011-01-16
* altos: Check for full log and complainKeith Packard2011-01-07
* altos: support storage of multiple flights.Keith Packard2011-01-07
* altos: Add configuration parameter for maximum flight log sizeKeith Packard2011-01-07
* altos: Move common storage code to ao_storage.c. Add M25P80 driverKeith Packard2011-01-06
* altos: Require manual flight erasing.Keith Packard2011-01-06
* altos: Simplify storage APIKeith Packard2011-01-06
* altos: Split out SPI driver.Keith Packard2010-12-22
* altos: eliminate ao_wake_taskKeith Packard2010-12-22
* altos: clean up radio abort paths. Share radio code.Keith Packard2010-12-22
* altos: Bounds check Skytraq GPS tracking data arrayKeith Packard2010-09-01
* altos: prepare for sdcc 2.9.1Keith Packard2010-08-27
* altos: mark gps date written only after it gets into eepromKeith Packard2010-08-26
* altosui: write USB serial number string while flashingKeith Packard2010-08-24
* altos: Place rom config variables in fixed locationKeith Packard2010-08-23
* altos: add callsign to packet mode, increase payload to 64 bytesKeith Packard2010-08-07
* Make ao_log_data re-entrant as it is used for both sensor and GPS logsKeith Packard2010-07-28
* Telemetry code was mis-computing RSSIKeith Packard2010-07-14
* Add special code for USB panic's.Keith Packard2010-06-16
* Tasks may move in task structure as a result of ao_exitKeith Packard2010-04-06
* Fix up LED colors for each product.Keith Packard2010-02-27
* Change altos build process to support per-product compile-time changesKeith Packard2010-02-20
* Log GPS data on pad after boost detect.Keith Packard2010-02-13
* Force idle mode by shorting the SPI clock to ground at boot time.Keith Packard2010-01-09
* Add AT45DBxx1D driverKeith Packard2010-01-09
* Use ao_radio_get/ao_radio_put in packet code.Keith Packard2009-12-19
* Re-order config values. Change frequency to calKeith Packard2009-12-05
generated by cgit v1.2.3 (git 2.39.1) at 2025-12-08 18:58:00 +0000