summaryrefslogtreecommitdiff
path: root/src/ao.h
Commit message (Expand)AuthorAge
* altos/altosui: Add ability to disable telemetry/rdf completelyKeith Packard2011-08-20
* altos: Correct AO_CONFIG_MINOR from 6 to 7Keith Packard2011-08-13
* altos: Send serial/flight to companion boardKeith Packard2011-08-13
* altos: Send SPI message at flight state changesKeith Packard2011-08-13
* altos: Add SPI-based companion board supportKeith Packard2011-08-13
* altos/altosui: Report log format in the version commandKeith Packard2011-08-13
* altos: Pull igniter pins low as soon as possible at boot timeKeith Packard2011-08-11
* altos: Add ability to set arbitrary radio frequencyKeith Packard2011-08-08
* altos/altosui: Add pad orientation configure optionKeith Packard2011-08-02
* altos: Average height values for landing detectionKeith Packard2011-08-02
* altos, altosui: Add igniter mode (dual, apogee, main)split-telemetryKeith Packard2011-07-17
* altos: Switch flash drivers __xdata to __pdataKeith Packard2011-07-06
* altos: Switch ao_flight and ao_flight_nano __xdata to __pdataKeith Packard2011-07-06
* altos: switch ao_cmd __xdata to __pdataKeith Packard2011-07-06
* altos: Switch const for __code in struct ao_cmdsKeith Packard2011-07-06
* altos: Switch ao_stdio.c __data to __pdataKeith Packard2011-07-06
* altos: Switch ao_sample.c __xdata to __pdataKeith Packard2011-07-06
* altos: Switch ao_log.c and ao_log_big.c __xdata to __pdataKeith Packard2011-07-06
* altos: Switch ao_gps_skytraq and ao_gps_sirf __xdata to __pdataKeith Packard2011-07-06
* altos: Adapt to changes in telemetry Configuration packetKeith Packard2011-07-05
* altos: Complete new telemetry switchoverKeith Packard2011-07-04
* altos: Add split telemetry codeKeith Packard2011-07-04
* altos: Start adding new telemetry frame definitionsKeith Packard2011-06-27
* altos: Add arbitrary telemetry packet monitoringKeith Packard2011-06-27
* altos: Rename telemetry to telemetry_origKeith Packard2011-06-27
* altos: Hook up the P1 ISR for TeleBT v0.1 bt_link lineKeith Packard2011-05-06
* altos: Solidify BT connectionsKeith Packard2011-04-19
* altos: Use PIO(6) on BTM to monitor BT connection. Fix BTM init.Keith Packard2011-04-07
* altos: Make cmd echo per-connection instead of globalKeith Packard2011-04-01
* altos: Make ao_serial_drain publicKeith Packard2011-04-01
* altos: Provide for a pre-filter on commandsKeith Packard2011-04-01
* altos: expose set of available stdio valuesKeith Packard2011-04-01
* altos: Add initial TeleBT codeKeith Packard2011-03-31
* altos: Create custom nano flight codeKeith Packard2011-03-28
* altos: Split up flight code into separate flight/sample/kalman bitsKeith Packard2011-03-28
* altos: Switch telemetrum over to kalman filterKeith Packard2011-03-22
* altos: New telemetry report format (version 4). Supports tiny telemetry.Keith Packard2011-03-19
* altos: Split out tiny telemetry from full telemetryKeith Packard2011-03-19
* altos: Make telemetry interval more consistentKeith Packard2011-03-19
* altos: Configure packet size from send/recv parameters.Keith Packard2011-03-19
* altos: Don't init packet slave on TD. Make slave start optionalKeith Packard2011-03-19
* altos: Write height values to log for nano/miniKeith Packard2011-03-18
* altos: Add tiny logging for TeleMini/TeleNanoKeith Packard2011-03-17
* altos: Make serial, usb, beeper and accelerometer optional componentsKeith Packard2011-03-16
* src/ao_cmd: Shave off bytes from doc stringsAnthony Towns2011-03-07
* ao_radio: generalise setup of packet sizeAnthony Towns2011-02-18
* altos: Sample the accelerometer reference voltage on v1.1 boardsKeith Packard2011-01-16
* altos: Ensure flight code gets first crack at new ADC dataKeith Packard2011-01-16
* altos: TELEMETRY PROTOCOL CHANGE. Switch to 16-bit serial numbers.Keith Packard2011-01-16
* altos: Check for full log and complainKeith Packard2011-01-07
generated by cgit v1.2.3 (git 2.39.1) at 2025-10-18 02:38:25 +0000