mjb/altos - AltOS - the operating system for Altus Metrum products

	Commit message (Collapse)	Author	Age
...
\| *	Add support for a serial-connected custom debug dongle	Keith Packard	2009-04-06
\| \| \| \| \| \| \| \| \| \|	This uses the cc1111 board as a custom debug dongle with faster methods for communicating with the debug target.
\| *	Reset cc1111 on s51 exit	Keith Packard	2009-04-01
\| \|
\| *	Add timer-based beep test	Keith Packard	2009-04-01
\| \|
\| *	Add readline support to s51	Keith Packard	2009-03-26
\| \|
\| *	Deal with MSB-outputing DMA engine	Keith Packard	2009-03-25
\| \|
\| *	Flip ADC bytes around	Keith Packard	2009-03-25
\| \|
\| *	Add spacing for serial adc data	Keith Packard	2009-03-25
\| \|
\| *	Inc only one on dest addr	Keith Packard	2009-03-25
\| \|
\| *	Dump remaining inputs	Keith Packard	2009-03-25
\| \|
\| *	Remove poll for ti demo button	Keith Packard	2009-03-25
\| \|
\| *	Add adc to serial conversion	Keith Packard	2009-03-25
\| \|
\| *	Add ADC via DMA example	Keith Packard	2009-03-25
\| \|
\| *	Add DMA example	Keith Packard	2009-03-25
\| \|
\| *	Back to 0dBm	Keith Packard	2009-03-25
\| \|
\| *	Make radio test compile again	Keith Packard	2009-03-25
\| \|
\| *	Wait for xtal to stabilize	Keith Packard	2009-03-25
\| \|
\| *	Check serial input	Keith Packard	2009-03-25
\| \|
\| *	Eliminate array walking	Keith Packard	2009-03-25
\| \|
\| *	Add a per-char delay	Keith Packard	2009-03-25
\| \|
\| *	Use UTX1IF to wait for serial TX complete	Keith Packard	2009-03-25
\| \|
\| *	Send more interesting text	Keith Packard	2009-03-25
\| \|
\| *	More random serial bit frobbing	Keith Packard	2009-03-25
\| \|
\| *	Flip serial TX code around a bit	Keith Packard	2009-03-25
\| \|
\| *	Try serial polarity high/high	Keith Packard	2009-03-25
\| \|
\| *	Make serial test simpler	Keith Packard	2009-03-25
\| \|
\| *	Flip start/stop bits around	Keith Packard	2009-03-25
\| \|
\| *	Stop high	Keith Packard	2009-03-24
\| \|
\| *	Change radio to -30dBm	Keith Packard	2009-03-24
\| \|
\| *	Add serial test program	Keith Packard	2009-03-24
\| \|
\| *	Wait for xtal to stabilize after changing to 24MHz	Keith Packard	2009-03-24
\| \|
\| *	Actually return byte read from SPI	Keith Packard	2009-03-24
\| \|
\| *	Clear UxCSR_TX_BYTE after transmitting a byte	Keith Packard	2009-03-24
\| \|
\| *	Led the LED turn on	Keith Packard	2009-03-24
\| \|
\| *	actually write and compare SPI test bits	Keith Packard	2009-03-24
\| \|
\| *	Add USART-based SPI test code	Keith Packard	2009-03-24
\| \|
\| *	Change spi test string	Keith Packard	2009-03-24
\| \|
\| *	Oops, not merging in the bit read for SPI test	Keith Packard	2009-03-24
\| \|
\| *	Adjust clock/data phase for spi test	Keith Packard	2009-03-24
\| \|
\| *	MISO needs to be an input	Keith Packard	2009-03-24
\| \|
\| *	Add bit-banging spi eeprom test program	Keith Packard	2009-03-24
\| \|
\| *	working beep at around 4khz	Bdale Garbee	2009-03-18
\| \|
\| *	Add simple test program to light up the transmitter at 434.550MHz	Keith Packard	2009-03-18
\| \| \| \| \| \| \| \| \| \|	This starts a transmit sequence, but doesn't send any data so the transmitter just locks on.
\| *	Correctly comment which bit the beep program uses	Keith Packard	2009-03-15
\| \|
\| *	Add telemetrum beeper example	Keith Packard	2009-03-15
\| \|
\| *	sdcc gets the lib path correct based on the model	Keith Packard	2009-03-15
\| \|
\| *	Bump debug speed back up	Keith Packard	2009-03-15
\| \|
\| *	Only flip changing bits in async mode	Keith Packard	2009-03-07
\| \|
\| *	The debug port only works if reset is higher than clock. weird	Keith Packard	2009-03-07
\| \|
\| *	Make manual bit flipping sync after every transaction	Keith Packard	2009-03-07
\| \|
\| *	Add ccmanual	Keith Packard	2009-03-07
\| \|