summaryrefslogtreecommitdiff
Commit message (Expand)AuthorAge
...
| * altos/ao_rn4678: Send '$$$' for new devices. Fix name setting code.Keith Packard2017-05-15
| * altos/stmf: Fix up serial port flow control configuration bitsKeith Packard2017-05-15
| * libaltos: Add support for TeleBT-v4.0 bluetooth channel changeKeith Packard2017-05-13
| * altoslib: Handle TeleBT v4.0 battery voltageKeith Packard2017-05-13
| * altos/telebt-v4.0: Hook up RN4678 moduleKeith Packard2017-05-13
| * altos: Add RN4678 Bluetooth module driverKeith Packard2017-05-13
| * Use SDP to locate the service channel on LinuxKeith Packard2017-05-13
| * altoslib: Another bit of altoslib for the old eeprom stuffKeith Packard2017-05-13
| * have AltosGraph use new AltosPressure to get imperial_units workingBdale Garbee2017-05-11
| * initial tests made using Terry's stand with a 2500psi sensorBdale Garbee2017-05-11
| * telefiretwo: don't try to record pre-burn sensor values in FLIGHT recordBdale Garbee2017-05-11
| * have git ignore ao-bringup/cal_valuesBdale Garbee2017-05-11
| * telegps: use new eeprom reading codeBdale Garbee2017-05-10
| * altoslib: Remove older eeprom handling codeKeith Packard2017-05-09
| * altoslib: Save eeprom data in new .eeprom formatKeith Packard2017-05-09
| * altosui: Use new eeprom reading codeKeith Packard2017-05-09
| * altoslib: Hack up AltosEepromFile to support new eeprom codeKeith Packard2017-05-09
| * altoslib: Compile AltosForce and AltosPressureKeith Packard2017-05-09
| * altoslib: Add new eeprom management codeKeith Packard2017-05-09
| * altoslib: Add set_config_data to AltosStateKeith Packard2017-05-09
| * altoslib: Add empty constructor for AltosPyro for JSONKeith Packard2017-05-09
| * altoslib: Add Ms5607 constructor that just takes config_dataKeith Packard2017-05-09
| * altoslib: Add AltosForce and AltosPressure unitsKeith Packard2017-05-09
| * altoslib: Hide members from json by prefixing with __Keith Packard2017-05-09
| * altos/telemini-v3.0: Use dbg connector pin 5 for force bootloaderKeith Packard2017-05-04
| * altos/telemini-v3.0: Add 'recovery mode' on PA14 (pin 6 on dbg header)Keith Packard2017-05-04
| * altos: Move 'ao_force_freq' to ao_config.cKeith Packard2017-05-04
| * altos: Make CDC ACM 'line coding' publicKeith Packard2017-05-04
| * altoslib: Fix MS5607 raw data to pressure conversion functionMiguel Benavidez2017-05-04
| * altos/telebt-v4.0 Set CPU clock to 48Mhz instead of 96MhzBdale Garbee2017-05-03
| * altos/telegps-v2.0: Disable external serial port to save ROMKeith Packard2017-05-02
| * altos/stmf0: Add code to use SoC flash as storageKeith Packard2017-05-02
| * altos/telegps-v2.0: Reorder initialization sequenceKeith Packard2017-04-30
| * altos/telegps-v2.0: CC1200 CS is PA1, not PA5.Keith Packard2017-04-30
| * altos/telegps-v2.0: GPS chip is connected to serial 2, not serial 1Keith Packard2017-04-30
| * altos/telegps-v2.0: Remove some unneeded definesKeith Packard2017-04-30
| * altos/telegps-v2.0: Battery ADC input is on PB1, not PA0Keith Packard2017-04-30
| * altos/telegps-v2.0: Set CPU clock to 48MHz instread of 96MHzKeith Packard2017-04-30
| * altos/telegps-v2.0: Adjust LED configKeith Packard2017-04-30
| * altos/kernel: Allow TeleGPS v2 to scale battery in telemKeith Packard2017-04-30
| * src/kernel: Add GPS lock blink LED to tracker codeKeith Packard2017-04-30
| * altos: Build MicroPeak-v2.0 by defaultKeith Packard2017-04-28
| * altos/micropeak-v2.0: Add initial MicroPeak v2 supportKeith Packard2017-04-28
| * altos/stmf0: Add support for HSI clocked applicationsKeith Packard2017-04-28
| * altos/stmf0: Fix HSI clock rate.Keith Packard2017-04-28
| * altos/stmf0: Make sure systick is off before programmingKeith Packard2017-04-28
| * altos/stmf0: Compute serial baud rate registers at runtimeKeith Packard2017-04-28
| * altos/micropeak: Update ao_micropeak.h for MicroPeak v2Keith Packard2017-04-28
| * altos/micropeak: Use existing ao_ms5607_current variableKeith Packard2017-04-28
| * altos: Add header file for ao_report_micro.cKeith Packard2017-04-28
generated by cgit v1.2.3 (git 2.39.1) at 2026-08-08 08:40:12 +0000