summaryrefslogtreecommitdiff
Commit message (Expand)AuthorAge
* avr: Block interrupts while executing SPI slave codetelescienceKeith Packard2012-05-26
* altos-avr: Include serial/flight in companion commandsKeith Packard2011-08-13
* altos: Report log format in the version commandKeith Packard2011-08-13
* altos-avr: Store TM tick and state in log, get logging on/off workingKeith Packard2011-08-12
* altos-avr: Completely replace the spi slave codeKeith Packard2011-08-12
* altos-avr: Add SPI-slave companion supportKeith Packard2011-07-13
* src-avr: Improve speed of LCD transfers, add hex-code character inputKeith Packard2011-06-04
* src-avr: Add LCD driver for NHD-C0216CU-FN-GWB-3V displayKeith Packard2011-06-04
* src-avr: Run CPU at 8MHz, even with a 16MHz xtalKeith Packard2011-06-04
* Set version to 0.9.30.9.3Keith Packard2011-05-25
* altos: Make telescience reliably log only when told toKeith Packard2011-05-24
* src-avr: Move logging printfs out of ISR call chainKeith Packard2011-05-23
* src-avr: Control log with pin on companion connectorKeith Packard2011-05-23
* altos: Signal ascent using P1_2 (0 = ascent, 1 = other)Keith Packard2011-05-23
* altos, altosui: Add igniter mode (dual, apogee, main)Keith Packard2011-05-23
* src-avr: Check RAM usage for telescienceKeith Packard2011-05-21
* src-avr: bump ADC ring to 16 samplesKeith Packard2011-05-21
* src-avr: Finish up telescience loggingKeith Packard2011-05-21
* src-avr: Log ADC data to eepromKeith Packard2011-05-21
* src-avr: Clean up AVR ADC codeKeith Packard2011-05-21
* src-avr: Add ADC routines to telescienceKeith Packard2011-05-21
* src-avr: Reduce control connection interruptsKeith Packard2011-05-20
* src-avr: Clean up the USB echo debug task a bitKeith Packard2011-05-20
* src-avr: Disable USB interrupts while we're not interestedKeith Packard2011-05-20
* src-avr: Add USB IRQ debug cmdKeith Packard2011-05-20
* src-avr: Attempt to leave IN interrupts disabled most of the timeKeith Packard2011-05-20
* src-avr: Add 'sleep_cpu' to reduce power usage while idleKeith Packard2011-05-20
* src-avr: Add SPI modules to telescienceKeith Packard2011-05-19
* src-avr: Add telescience build targetKeith Packard2011-05-19
* src-avr: Get USB on AVR workingKeith Packard2011-05-18
* src-avr: Make avr-demo objects depend on ao_usb.hKeith Packard2011-05-18
* src-avr: Trap accidental restartKeith Packard2011-05-18
* src-avr: Suspend interrupts while switching stacksKeith Packard2011-05-18
* src-avr: USB work in progressKeith Packard2011-05-17
* src-avr: Add a couple of missing filesKeith Packard2011-05-17
* altos-avr: Start writing USB driver.Keith Packard2011-05-15
* altos-avr: Enable command processor over serial line in demoKeith Packard2011-05-13
* altos-avr: Initial OS port to AVRKeith Packard2011-05-13
* ao-bringup-avr: cleaner stack switching codeKeith Packard2011-05-13
* ao-bringup-avr: clean up alternate stack codeKeith Packard2011-05-13
* ao-bringup-avr: switching to alternate stack worksKeith Packard2011-05-13
* ao-bringup-avr: Create common 'ao-bringup' interfacesKeith Packard2011-05-12
* Add uart testKeith Packard2011-05-12
* Run on new stackKeith Packard2011-05-12
* ao-bringup-avr: Switch to ADC13Keith Packard2011-05-12
* ao-bringup-avr: Flip to 8MHz clock for TeleScienceKeith Packard2011-05-11
* ao-bringup-avr: Make LED PWM from ADC0 valueKeith Packard2011-05-11
* ao-bringup-avr: Initialize crystal clock and 100Hz timer interruptKeith Packard2011-05-11
* ao-bringup-avr: Enable crystal clock in blink demoKeith Packard2011-05-11
* Merge branch 'telebt' into telescienceKeith Packard2011-05-11
|\
generated by cgit v1.2.3 (git 2.39.1) at 2025-10-15 12:04:04 +0000