summaryrefslogtreecommitdiff
Commit message (Expand)AuthorAge
* altosui: Respect storage limits in flight log max config0.9.6.0Keith Packard2011-08-14
* altosui: don't set channel when using radio settingKeith Packard2011-08-14
* altos: use raw height while waiting for landingKeith Packard2011-08-13
* altos: Reset radio channel to zero when using radio settingKeith Packard2011-08-13
* altos: Correct AO_CONFIG_MINOR from 6 to 7Keith Packard2011-08-13
* altos: AltosSerial.flush_input shouldn't discard Interrupted exceptionsKeith Packard2011-08-13
* altosui: Eliminate inter-chunk flush_input callsKeith Packard2011-08-13
* altosui: Devices with log-format can also delete flightsKeith Packard2011-08-13
* altosui: Add support for TeleScience eeprom downloadKeith Packard2011-08-13
* altosui: Clean up eeprom parsing a bitKeith Packard2011-08-13
* altos: wait 10s for companion to bootKeith Packard2011-08-13
* altos: Send serial/flight to companion boardKeith Packard2011-08-13
* altos: Send SPI message at flight state changesKeith Packard2011-08-13
* altosui: Add companion support to the flight UI and CSV conversionKeith Packard2011-08-13
* altos: Check for companion init packet validity was bustedKeith Packard2011-08-13
* altos: add the 'L' command to show the status of a linked companion boardKeith Packard2011-08-13
* altos: Make sure companion task exits cleanly when doneKeith Packard2011-08-13
* altos: Put SPI in slower mode when talking to companion boardKeith Packard2011-08-13
* altos: Add SPI-based companion board supportKeith Packard2011-08-13
* altos: Don't try to use non-basestations for remote eeprom downloadKeith Packard2011-08-13
* altos/altosui: Report log format in the version commandKeith Packard2011-08-13
* altos: re-write a bit of GPS parsing code to reduce sizeKeith Packard2011-08-13
* altos: shrink text space from ao_config.cKeith Packard2011-08-13
* libaltos: Mis-allocated device list in libaltosKeith Packard2011-08-13
* ao-tools: ao-list was crashing with more than 3 devices connectedKeith Packard2011-08-13
* altos: remove monitor disable stubs from altimeter codeKeith Packard2011-08-11
* altos: Apply igniter boot pulse-width reduction to teleminiKeith Packard2011-08-11
* altos: Pull igniter pins low as soon as possible at boot timeKeith Packard2011-08-11
* doc: Add 1.0 release notes.Keith Packard2011-08-10
* doc: Add release notes, include them in altusmetrum doc. Shuffle altusmetrumKeith Packard2011-08-10
* doc: Add telemetry docs to debian/linux/mac/windows packagesKeith Packard2011-08-10
* doc: Describe 'stats' tab in Graph UI, 'Graph Flight' button.Keith Packard2011-08-10
* doc: Document Ignite Mode and Pad Orientation configuration optionsKeith Packard2011-08-10
* doc: Update altusmetrum.xsl for v1.0 software and TeleMiniKeith Packard2011-08-10
* Bump version to 0.9.6.0Keith Packard2011-08-10
* altosui: Move launch-sites.txt file to altusmetrum.orgKeith Packard2011-08-10
* altosui: Plot reasonable data from Tm filesKeith Packard2011-08-10
* altosui: Prune telemetry file graphs to just the flightKeith Packard2011-08-10
* altosui: Add a 'Graph Flight' button to the 'landed' tabKeith Packard2011-08-10
* Altosui: Add flight statistics tab to graph windowKeith Packard2011-08-10
* altosui: Ship TeleMini v1.0 firmware with fat blobsKeith Packard2011-08-09
* altosui: Ensure serial code tracks reply nesting correctlyKeith Packard2011-08-09
* altosui: Don't export product defs from libaltosKeith Packard2011-08-09
* altos: Switch telemini from v0.1 to v1.0Keith Packard2011-08-09
* altosui: Add close button to 'fire' dialogKeith Packard2011-08-08
* altosui: Make set of telemetries to use while scanning configurableKeith Packard2011-08-08
* altosui: Reading serial from swing thread only bad if remoteKeith Packard2011-08-08
* altosui: Remove unused AltosConfigData from AltosTelemetryReaderKeith Packard2011-08-08
* altosui: Flush radio setting to serial deviceKeith Packard2011-08-08
* altosui: Remove debugging printfs from AltosSerialKeith Packard2011-08-08
generated by cgit v1.2.3 (git 2.39.1) at 2025-10-15 12:04:45 +0000