diff options
Diffstat (limited to 'src/telelco-v2.0/ao_pins.h')
| -rw-r--r-- | src/telelco-v2.0/ao_pins.h | 398 |
1 files changed, 398 insertions, 0 deletions
diff --git a/src/telelco-v2.0/ao_pins.h b/src/telelco-v2.0/ao_pins.h new file mode 100644 index 00000000..95998dc7 --- /dev/null +++ b/src/telelco-v2.0/ao_pins.h @@ -0,0 +1,398 @@ +/* + * Copyright © 2012 Keith Packard <keithp@keithp.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. + */ + +#ifndef _AO_PINS_H_ +#define _AO_PINS_H_ + +/* 8MHz High speed external crystal */ +#define AO_HSE 8000000 + +/* PLLVCO = 96MHz (so that USB will work) */ +#define AO_PLLMUL 12 +#define AO_RCC_CFGR_PLLMUL (STM_RCC_CFGR_PLLMUL_12) + +#define AO_CC1200_FOSC 40000000 + +/* SYSCLK = 32MHz (no need to go faster than CPU) */ +#define AO_PLLDIV 3 +#define AO_RCC_CFGR_PLLDIV (STM_RCC_CFGR_PLLDIV_3) + +/* HCLK = 32MHz (CPU clock) */ +#define AO_AHB_PRESCALER 1 +#define AO_RCC_CFGR_HPRE_DIV STM_RCC_CFGR_HPRE_DIV_1 + +/* Run APB1 at 16MHz (HCLK/2) */ +#define AO_APB1_PRESCALER 2 +#define AO_RCC_CFGR_PPRE1_DIV STM_RCC_CFGR_PPRE2_DIV_2 + +/* Run APB2 at 16MHz (HCLK/2) */ +#define AO_APB2_PRESCALER 2 +#define AO_RCC_CFGR_PPRE2_DIV STM_RCC_CFGR_PPRE2_DIV_2 + +#define HAS_EEPROM 1 +#define USE_INTERNAL_FLASH 1 +#define USE_EEPROM_CONFIG 1 +#define USE_STORAGE_CONFIG 0 +#define HAS_USB 1 +#define HAS_BEEP 1 +#define HAS_RADIO 1 +#define HAS_RADIO_RATE 1 +#define HAS_TELEMETRY 0 +#define HAS_AES 1 +#define HAS_STATIC_TEST 0 + +#define HAS_SPI_1 0 +#define SPI_1_PA5_PA6_PA7 0 +#define SPI_1_PB3_PB4_PB5 0 +#define SPI_1_PE13_PE14_PE15 0 + +#define HAS_SPI_2 1 /* CC1200 */ +#define SPI_2_PB13_PB14_PB15 0 +#define SPI_2_PD1_PD3_PD4 1 +#define SPI_2_GPIO (&stm_gpiod) +#define SPI_2_SCK 1 +#define SPI_2_MISO 3 +#define SPI_2_MOSI 4 +#define SPI_2_OSPEEDR STM_OSPEEDR_10MHz + +#define HAS_I2C_1 0 + +#define HAS_I2C_2 0 + +#define PACKET_HAS_SLAVE 0 +#define PACKET_HAS_MASTER 0 + +#define FAST_TIMER_FREQ 10000 /* .1ms for debouncing */ + +/* + * Radio is a cc1200 connected via SPI + */ + +#define AO_RADIO_CAL_DEFAULT 5695733 + +#define AO_CC1200_SPI_CS_PORT (&stm_gpiod) +#define AO_CC1200_SPI_CS_PIN 0 +#define AO_CC1200_SPI_BUS AO_SPI_2_PD1_PD3_PD4 +#define AO_CC1200_SPI stm_spi2 +#define AO_CC1200_SPI_SPEED AO_SPI_SPEED_FAST + +#define AO_CC1200_INT_PORT (&stm_gpiod) +#define AO_CC1200_INT_PIN (5) + +#define AO_CC1200_INT_GPIO 2 +#define AO_CC1200_INT_GPIO_IOCFG CC1200_IOCFG2 + +#define LOW_LEVEL_DEBUG 0 + +#define LED_PER_LED 1 +#define LED_TYPE uint16_t + +#define LED_ENABLE_BITS ((1 << STM_RCC_AHBENR_GPIOAEN) | \ + (1 << STM_RCC_AHBENR_GPIOCEN) | \ + (1 << STM_RCC_AHBENR_GPIODEN) | \ + (1 << STM_RCC_AHBENR_GPIOEEN)) + +/* PC7 - PC9, LED 0 - 2 */ +#define LED_0_PORT (&stm_gpioc) +#define LED_0_PIN 7 +#define LED_1_PORT (&stm_gpioc) +#define LED_1_PIN 8 +#define LED_2_PORT (&stm_gpioc) +#define LED_2_PIN 9 + +/* PD8 - PD10, LED 3 - 5 */ +#define LED_3_PORT (&stm_gpiod) +#define LED_3_PIN 8 +#define LED_4_PORT (&stm_gpiod) +#define LED_4_PIN 9 +#define LED_5_PORT (&stm_gpiod) +#define LED_5_PIN 10 + +/* PE2 - PE11 (not PE6), LED 6-14 */ +#define LED_6_PORT (&stm_gpioe) +#define LED_6_PIN 2 +#define LED_7_PORT (&stm_gpioe) +#define LED_7_PIN 3 +#define LED_8_PORT (&stm_gpioe) +#define LED_8_PIN 4 +#define LED_9_PORT (&stm_gpioe) +#define LED_9_PIN 5 +#define LED_10_PORT (&stm_gpioe) +#define LED_10_PIN 7 +#define LED_11_PORT (&stm_gpioe) +#define LED_11_PIN 8 +#define LED_12_PORT (&stm_gpioe) +#define LED_12_PIN 9 +#define LED_13_PORT (&stm_gpioe) +#define LED_13_PIN 10 +#define LED_14_PORT (&stm_gpioe) +#define LED_14_PIN 11 + +/* PA5, LED 15 */ +#define LED_15_PORT (&stm_gpioa) +#define LED_15_PIN 5 + +#define LED_PIN_RED 0 +#define LED_PIN_AMBER 1 +#define LED_PIN_GREEN 2 +#define LED_PIN_BOX 3 +#define LED_PIN_PAD 4 +#define LED_PIN_DRAG 5 +#define LED_PIN_CONTINUITY_7 6 +#define LED_PIN_CONTINUITY_6 7 +#define LED_PIN_CONTINUITY_5 8 +#define LED_PIN_CONTINUITY_4 9 +#define LED_PIN_CONTINUITY_3 10 +#define LED_PIN_CONTINUITY_2 11 +#define LED_PIN_CONTINUITY_1 12 +#define LED_PIN_CONTINUITY_0 13 +#define LED_PIN_REMOTE_ARM 14 +#define LED_PIN_FIRE 15 +#define AO_LED_RED (1 << LED_PIN_RED) +#define AO_LED_AMBER (1 << LED_PIN_AMBER) +#define AO_LED_GREEN (1 << LED_PIN_GREEN) +#define AO_LED_BOX (1 << LED_PIN_BOX) +#define AO_LED_PAD (1 << LED_PIN_PAD) +#define AO_LED_DRAG (1 << LED_PIN_DRAG) +#define AO_LED_CONTINUITY_7 (1 << LED_PIN_CONTINUITY_7) +#define AO_LED_CONTINUITY_6 (1 << LED_PIN_CONTINUITY_6) +#define AO_LED_CONTINUITY_5 (1 << LED_PIN_CONTINUITY_5) +#define AO_LED_CONTINUITY_4 (1 << LED_PIN_CONTINUITY_4) +#define AO_LED_CONTINUITY_3 (1 << LED_PIN_CONTINUITY_3) +#define AO_LED_CONTINUITY_2 (1 << LED_PIN_CONTINUITY_2) +#define AO_LED_CONTINUITY_1 (1 << LED_PIN_CONTINUITY_1) +#define AO_LED_CONTINUITY_0 (1 << LED_PIN_CONTINUITY_0) +#define AO_LED_CONTINUITY_NUM 8 +#define AO_LED_REMOTE_ARM (1 << LED_PIN_REMOTE_ARM) +#define AO_LED_FIRE (1 << LED_PIN_FIRE) + +#define LEDS_AVAILABLE (AO_LED_RED | \ + AO_LED_AMBER | \ + AO_LED_GREEN | \ + AO_LED_BOX | \ + AO_LED_PAD | \ + AO_LED_DRAG | \ + AO_LED_CONTINUITY_7 | \ + AO_LED_CONTINUITY_6 | \ + AO_LED_CONTINUITY_5 | \ + AO_LED_CONTINUITY_4 | \ + AO_LED_CONTINUITY_3 | \ + AO_LED_CONTINUITY_2 | \ + AO_LED_CONTINUITY_1 | \ + AO_LED_CONTINUITY_0 | \ + AO_LED_REMOTE_ARM | \ + AO_LED_FIRE) + +/* LCD displays */ + +#define LCD_DEBUG 0 +#define SEVEN_SEGMENT_DEBUG 0 + +#define AO_LCD_STM_SEG_ENABLED_0 ( \ + (1 << 0) | /* PA1 */ \ + (1 << 1) | /* PA2 */ \ + (1 << 2) | /* PA3 */ \ + (1 << 3) | /* PA6 */ \ + (1 << 4) | /* PA7 */ \ + (1 << 5) | /* PB0 */ \ + (1 << 6) | /* PB1 */ \ + (1 << 7) | /* PB3 */ \ + (1 << 8) | /* PB4 */ \ + (1 << 9) | /* PB5 */ \ + (1 << 10) | /* PB10 */ \ + (1 << 11) | /* PB11 */ \ + (1 << 12) | /* PB12 */ \ + (1 << 13) | /* PB13 */ \ + (1 << 14) | /* PB14 */ \ + (1 << 15) | /* PB15 */ \ + (1 << 16) | /* PB8 */ \ + (1 << 17) | /* PA15 */ \ + (1 << 18) | /* PC0 */ \ + (1 << 19) | /* PC1 */ \ + (1 << 20) | /* PC2 */ \ + (1 << 21) | /* PC3 */ \ + (1 << 22) | /* PC4 */ \ + (1 << 23) | /* PC5 */ \ + (0 << 24) | /* PC6 */ \ + (0 << 25) | /* PC7 */ \ + (0 << 26) | /* PC8 */ \ + (0 << 27) | /* PC9 */ \ + (0 << 28) | /* PC10 or PD8 */ \ + (0 << 29) | /* PC11 or PD9 */ \ + (0 << 30) | /* PC12 or PD10 */ \ + (0 << 31)) /* PD2 or PD11 */ + +#define AO_LCD_STM_SEG_ENABLED_1 ( \ + (0 << 0) | /* PD12 */ \ + (0 << 1) | /* PD13 */ \ + (0 << 2) | /* PD14 */ \ + (0 << 3) | /* PD15 */ \ + (0 << 4) | /* PE0 */ \ + (0 << 5) | /* PE1 */ \ + (0 << 6) | /* PE2 */ \ + (0 << 7)) /* PE3 */ + +#define AO_LCD_STM_COM_ENABLED ( \ + (1 << 0) | /* PA8 */ \ + (0 << 1) | /* PA9 */ \ + (0 << 2) | /* PA10 */ \ + (0 << 3) | /* PB9 */ \ + (0 << 4) | /* PC10 */ \ + (0 << 5) | /* PC11 */ \ + (0 << 6)) /* PC12 */ + +#define AO_LCD_28_ON_C 0 + +#define AO_LCD_DUTY STM_LCD_CR_DUTY_STATIC + +#define AO_LCD_PER_DIGIT 1 + +#define AO_LCD_DIGITS 3 +#define AO_LCD_SEGMENTS 8 + +#define AO_SEGMENT_MAP { \ + /* pad segments */ \ + { 0, 14 }, \ + { 0, 13 }, \ + { 0, 15 }, \ + { 0, 17 }, \ + { 0, 16 }, \ + { 0, 8 }, \ + { 0, 9 }, \ + { 0, 7 }, \ + /* box1 segments */ \ + { 0, 10 }, \ + { 0, 6 }, \ + { 0, 11 }, \ + { 0, 12 }, \ + { 0, 21 }, \ + { 0, 19 }, \ + { 0, 20 }, \ + { 0, 18 }, \ + /* box0 segments */ \ + { 0, 22 }, \ + { 0, 4 }, \ + { 0, 23 }, \ + { 0, 5 }, \ + { 0, 3 }, \ + { 0, 1 }, \ + { 0, 2 }, \ + { 0, 0 }, \ +} + +/* + * Use event queue for input devices + */ + +#define AO_EVENT 1 + +/* + * Knobs + */ + +#define AO_QUADRATURE_COUNT 1 +#define AO_QUADRATURE_DEBOUNCE 0 +#define AO_QUADRATURE_SINGLE_CODE 1 + +#define AO_QUADRATURE_0_PORT &stm_gpioe +#define AO_QUADRATURE_0_A 15 +#define AO_QUADRATURE_0_B 14 + +#define AO_QUADRATURE_SELECT 0 + +/* + * Buttons + */ + +#define AO_BUTTON_COUNT 9 +#define AO_BUTTON_MODE AO_EXTI_MODE_PULL_UP + +#define AO_BUTTON_DRAG_MODE 0 +#define AO_BUTTON_0_PORT &stm_gpioe +#define AO_BUTTON_0 1 + +#define AO_BUTTON_DRAG_SELECT 1 +#define AO_BUTTON_1_PORT &stm_gpioe +#define AO_BUTTON_1 0 + +#define AO_BUTTON_SPARE1 2 +#define AO_BUTTON_2_PORT &stm_gpiob +#define AO_BUTTON_2 9 + +#define AO_BUTTON_SPARE2 3 +#define AO_BUTTON_3_PORT &stm_gpiob +#define AO_BUTTON_3 7 + +#define AO_BUTTON_SPARE3 4 +#define AO_BUTTON_4_PORT &stm_gpiob +#define AO_BUTTON_4 6 + +#define AO_BUTTON_ARM 5 +#define AO_BUTTON_5_PORT &stm_gpioe +#define AO_BUTTON_5 12 + +#define AO_BUTTON_FIRE 6 +#define AO_BUTTON_6_PORT &stm_gpioa +#define AO_BUTTON_6 4 + +#define AO_BUTTON_SPARE4 7 +#define AO_BUTTON_7_PORT &stm_gpiod +#define AO_BUTTON_7 11 + +#define AO_BUTTON_ENCODER_SELECT 8 +#define AO_BUTTON_8_PORT &stm_gpioe +#define AO_BUTTON_8 13 + +/* ADC */ + +struct ao_adc { + int16_t v_batt; +}; + +#define AO_ADC_DUMP(p) \ + printf("batt: %5d\n", (p)->v_batt) + +#define HAS_ADC_SINGLE 1 +#define HAS_ADC_TEMP 0 +#define HAS_BATTERY_REPORT 1 + +#define AO_ADC_V_BATT 0 +#define AO_ADC_V_BATT_PORT (&stm_gpioa) +#define AO_ADC_V_BATT_PIN 0 + +#define AO_ADC_RCC_AHBENR (1 << STM_RCC_AHBENR_GPIOAEN) + +#define AO_ADC_PIN0_PORT AO_ADC_V_BATT_PORT +#define AO_ADC_PIN0_PIN AO_ADC_V_BATT_PIN + +#define AO_ADC_SQ1 AO_ADC_V_BATT + +#define AO_NUM_ADC 1 + +/* + * Voltage divider on ADC battery sampler + */ +#define AO_BATTERY_DIV_PLUS 15 /* 15k */ +#define AO_BATTERY_DIV_MINUS 27 /* 27k */ + +/* + * ADC reference in decivolts + */ +#define AO_ADC_REFERENCE_DV 33 + +#endif /* _AO_PINS_H_ */ |