diff options
Diffstat (limited to 'doc/altusmetrum.xsl')
| -rw-r--r-- | doc/altusmetrum.xsl | 30 |
1 files changed, 30 insertions, 0 deletions
diff --git a/doc/altusmetrum.xsl b/doc/altusmetrum.xsl index 9fdd6b07..e696da79 100644 --- a/doc/altusmetrum.xsl +++ b/doc/altusmetrum.xsl @@ -386,6 +386,36 @@ NAR #88757, TRA #12200 tower with a screw-driver trying to turn on your avionics before installing igniters! </para> + <para> + TeleMini is configured via the radio link. Of course, that + means you need to know the TeleMini radio configuration values + or you won't be able to communicate with it. For situations + when you don't have the radio configuration values, TeleMini + offers an 'emergency recovery' mode. In this mode, TeleMini is + configured as follows: + <itemizedlist> + <listitem> + Sets the radio frequency to 434.550MHz + </listitem> + <listitem> + Sets the radio calibration back to the factory value. + </listitem> + <listitem> + Sets the callsign to N0CALL + </listitem> + <listitem> + Does not go to 'pad' mode after five seconds. + </listitem> + </itemizedlist> + </para> + <para> + To get into 'emergency recovery' mode, first find the row of + four small holes opposite the switch wiring. Using a short + piece of small gauge wire, connect the outer two holes + together, then power TeleMini up. Once the red LED is lit, + disconnect the wire and the board should signal that it's in + 'idle' mode after the initial five second startup period. + </para> </section> <section> <title>GPS </title> |