diff options
| author | Keith Packard <keithp@keithp.com> | 2016-01-10 17:13:56 -0800 |
|---|---|---|
| committer | Keith Packard <keithp@keithp.com> | 2016-01-10 17:13:56 -0800 |
| commit | 6a00f186a06f22638882f43f49fa0c03ea387eac (patch) | |
| tree | 2c0f99836471bb3b7de216eec7615bc87c1c4b45 /doc/telemega.inc | |
| parent | 6cbf93995d90fc4790eb77bcaa233742857fe052 (diff) | |
doc: Remove telemini v2.0. Add telemega v2.0
Reflect hardware we've actually shipped.
Signed-off-by: Keith Packard <keithp@keithp.com>
Diffstat (limited to 'doc/telemega.inc')
| -rw-r--r-- | doc/telemega.inc | 12 |
1 files changed, 12 insertions, 0 deletions
diff --git a/doc/telemega.inc b/doc/telemega.inc index 4383f228..55f77bc4 100644 --- a/doc/telemega.inc +++ b/doc/telemega.inc @@ -9,6 +9,18 @@ the board is aligned with the flight axis. It can be mounted either antenna up or down. + TeleMega v2.0 has a few minor changes from v1.0: + + * Companion connector matches EasyMega functions + * Serial port connector replaced with servo connector with + support for up to 4 PWM channels. + * Radio switched from cc1120 to cc1200. + + None of these affect operation using the stock firmware, but + they do mean that the device needs different firmware to + operate correctly, so make sure you load the right firmware + when reflashing the device. + === TeleMega Screw Terminals TeleMega has two sets of nine screw terminals on the end of |