From 55abcab1bd9ec10376199fcbe1e39f333d0681a3 Mon Sep 17 00:00:00 2001 From: Keith Packard Date: Sun, 25 Aug 2013 18:06:53 -0700 Subject: Add EasyMini information Signed-off-by: Keith Packard --- EasyMini/index.mdwn | 61 +++++++++++++++++++++++++++++++++ EasyMini/v0.2/easymini-parts-thumb.jpg | Bin 0 -> 93505 bytes EasyMini/v0.2/easymini-parts.jpg | Bin 0 -> 1020735 bytes EasyMini/v0.2/easymini-top-thumb.jpg | Bin 0 -> 77563 bytes EasyMini/v0.2/easymini-top.jpg | Bin 0 -> 680720 bytes 5 files changed, 61 insertions(+) create mode 100644 EasyMini/index.mdwn create mode 100644 EasyMini/v0.2/easymini-parts-thumb.jpg create mode 100644 EasyMini/v0.2/easymini-parts.jpg create mode 100644 EasyMini/v0.2/easymini-top-thumb.jpg create mode 100644 EasyMini/v0.2/easymini-top.jpg (limited to 'EasyMini') diff --git a/EasyMini/index.mdwn b/EasyMini/index.mdwn new file mode 100644 index 0000000..9f565f3 --- /dev/null +++ b/EasyMini/index.mdwn @@ -0,0 +1,61 @@ +# EasyMini + +This is a small, baro-only recording dual-deploy altimeter for +model rocketry + +EasyMini is currently in development, with a handful of prototype +boards built and flown. Production units will eventually be available from the +[Garbee and Garbee](http://auric.gag.com) web +store. + +For the latest EasyMini firmware and related ground station software, please +visit the [AltOS](../AltOS) page on this site. + +These are photos of our current prototype version: + + + + +## Features ## + +### User View ### + +* Recording altimeter for model rocketry +* Supports dual deployment (can fire 2 ejection charges) +* Barometric pressure sensor good to 100k feet MSL +* Designed to use a battery supplying 3.7V-12V. +* 1.5 x 0.8 inch board designed to fit inside 24mm airframe coupler tube +* 2MB on-board data logging flash + +### Developer View ### + +* Hardware Features + * [NXP LPC11U14](http://www.nxp.com/products/microcontrollers/cortex_m0_m0/LPC11U14FHI33.html) System-on-Chip + * ARM Cortex-M0 MCU + * 32k Flash + * 6k RAM + * USB 2.0 + * 8 12-bit analog inputs + * I2C, SPI, async serial + * digital I/O + * [Measurement Specialties MS5607](http://www.meas-spec.com/product/pressure/MS5607-02BA03.aspx) pressure sensor + * 2MB SPI flash +* Software Features + * Written mostly in C with some ARM assembler + * Runs from on-chip flash, uses on-chip RAM, stores flight data to + flash memory part +* Tools Used + * [gEDA](http://www.gpleda.org/) for schematic capture and PCB layout + * [GCC](http://gcc.gnu.org/) compiler and source debugger +* Licenses + * The hardware is licensed under the [TAPR](http://www.tapr.org) [Open Hardware License](http://www.tapr.org/ohl.html) + * The software is licensed [GPL version 2](http://www.gnu.org/licenses/old-licenses/gpl-2.0.html) + +## Artifacts ## + +There is a single manual for EasyMini and all other Altus Metrum products, +which is available in [html](../AltOS/doc/altusmetrum.html) and +[pdf](../AltOS/doc/altusmetrum.pdf) formats. + +The hardware design files can be found on [git.gag.com](http://git.gag.com) +in the project [hw/easymini](http://git.gag.com/?p=hw/easymini;a=summary). diff --git a/EasyMini/v0.2/easymini-parts-thumb.jpg b/EasyMini/v0.2/easymini-parts-thumb.jpg new file mode 100644 index 0000000..ec79fc0 Binary files /dev/null and b/EasyMini/v0.2/easymini-parts-thumb.jpg differ diff --git a/EasyMini/v0.2/easymini-parts.jpg b/EasyMini/v0.2/easymini-parts.jpg new file mode 100644 index 0000000..724d4ea Binary files /dev/null and b/EasyMini/v0.2/easymini-parts.jpg differ diff --git a/EasyMini/v0.2/easymini-top-thumb.jpg b/EasyMini/v0.2/easymini-top-thumb.jpg new file mode 100644 index 0000000..f018f15 Binary files /dev/null and b/EasyMini/v0.2/easymini-top-thumb.jpg differ diff --git a/EasyMini/v0.2/easymini-top.jpg b/EasyMini/v0.2/easymini-top.jpg new file mode 100644 index 0000000..2b9e0a3 Binary files /dev/null and b/EasyMini/v0.2/easymini-top.jpg differ -- cgit v1.2.3 From c93df9ec428447646d916e2240cf50b6155b2b67 Mon Sep 17 00:00:00 2001 From: Bdale Garbee Date: Sun, 25 Aug 2013 19:07:38 -0600 Subject: creating index page EasyMini/v0.2 --- EasyMini/v0.2.mdwn | 1 + 1 file changed, 1 insertion(+) create mode 100644 EasyMini/v0.2.mdwn (limited to 'EasyMini') diff --git a/EasyMini/v0.2.mdwn b/EasyMini/v0.2.mdwn new file mode 100644 index 0000000..453e346 --- /dev/null +++ b/EasyMini/v0.2.mdwn @@ -0,0 +1 @@ +[[!map pages="EasyMini/v0.2/* and ! EasyMini/v0.2/*/*"]] -- cgit v1.2.3 From bb6039c22abdc1a52aa4eef57a47e00c0559afb9 Mon Sep 17 00:00:00 2001 From: Keith Packard Date: Sun, 25 Aug 2013 18:08:18 -0700 Subject: Typo in easymini parts image link Signed-off-by: Keith Packard --- EasyMini/index.mdwn | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'EasyMini') diff --git a/EasyMini/index.mdwn b/EasyMini/index.mdwn index 9f565f3..5a936f8 100644 --- a/EasyMini/index.mdwn +++ b/EasyMini/index.mdwn @@ -14,7 +14,7 @@ visit the [AltOS](../AltOS) page on this site. These are photos of our current prototype version: - + ## Features ## -- cgit v1.2.3 From 3e4db088f70295b7771917a8ad4141321631bf26 Mon Sep 17 00:00:00 2001 From: Keith Packard Date: Mon, 26 Aug 2013 20:40:02 -0700 Subject: Split TeleMini into two pages, one for 1.0 and another for 1.2 Signed-off-by: Keith Packard --- EasyMini/index.mdwn | 2 +- TeleMini/index.mdwn | 70 ++------------------------------- TeleMini/v1.0/index.mdwn | 69 ++++++++++++++++++++++++++++++++ TeleMini/v1.2.mdwn | 1 + TeleMini/v1.2/index.mdwn | 65 ++++++++++++++++++++++++++++++ TeleMini/v1.2/telemini-parts-thumb.jpg | Bin 0 -> 112479 bytes TeleMini/v1.2/telemini-parts.jpg | Bin 0 -> 1032315 bytes TeleMini/v1.2/telemini-top-thumb.jpg | Bin 0 -> 71878 bytes TeleMini/v1.2/telemini-top.jpg | Bin 0 -> 579692 bytes production.mdwn | 4 ++ 10 files changed, 144 insertions(+), 67 deletions(-) create mode 100644 TeleMini/v1.0/index.mdwn create mode 100644 TeleMini/v1.2.mdwn create mode 100644 TeleMini/v1.2/index.mdwn create mode 100644 TeleMini/v1.2/telemini-parts-thumb.jpg create mode 100644 TeleMini/v1.2/telemini-parts.jpg create mode 100644 TeleMini/v1.2/telemini-top-thumb.jpg create mode 100644 TeleMini/v1.2/telemini-top.jpg (limited to 'EasyMini') diff --git a/EasyMini/index.mdwn b/EasyMini/index.mdwn index 5a936f8..41b1c61 100644 --- a/EasyMini/index.mdwn +++ b/EasyMini/index.mdwn @@ -39,7 +39,7 @@ These are photos of our current prototype version: * I2C, SPI, async serial * digital I/O * [Measurement Specialties MS5607](http://www.meas-spec.com/product/pressure/MS5607-02BA03.aspx) pressure sensor - * 2MB SPI flash + * 1MB SPI flash * Software Features * Written mostly in C with some ARM assembler * Runs from on-chip flash, uses on-chip RAM, stores flight data to diff --git a/TeleMini/index.mdwn b/TeleMini/index.mdwn index 5a783cb..21b3822 100644 --- a/TeleMini/index.mdwn +++ b/TeleMini/index.mdwn @@ -1,69 +1,7 @@ -# TeleMini +# TeleMini # -This is a very small, baro-only recording dual-deploy altimeter for -model rocketry with integrated telemetry link. +There are two versions of TeleMini: -Production units are available from the -[Garbee and Garbee](http://auric.gag.com) web -store. TeleMini starter kits are also available from -[Apogee Components](http://www.apogeerockets.com/Altus_Metrum_telemini.asp). - -For the latest TeleMini firmware and related ground station software, please -visit the [AltOS](../AltOS) page on this site. - -These are photos of our current production version: - - - - -## Features ## - -### User View ### - -* Recording altimeter for model rocketry -* Supports dual deployment (can fire 2 ejection charges) -* 70cm ham-band transceiver for telemetry downlink -* Barometric pressure sensor good to 45k feet MSL -* Designed to use a single LiPo rechargeable battery -* 1.5 x 0.5 inch board designed to fit inside 18mm airframe coupler tube - -### Developer View ### - -* Hardware Features - * [TI CC1111F32](http://focus.ti.com/docs/prod/folders/print/cc1111f32.html) Low Power RF System-on-Chip - * Sub-1Ghz transceiver - * 8051 MCU - * 32k Flash - * 4k RAM - * USB 2.0 - * 6 12-bit analog inputs (11 bits with single-ended sensors) - * 2 channels of serial I/O - * digital I/O - * [Freescale MP3H6115A](http://www.freescale.com/webapp/search.partparamdetail.framework?PART_NUMBER=MP3H6115A6U) pressure sensor -* Software Features - * Written mostly in C with some 8051 assembler - * Runs from on-chip flash, uses on-chip RAM, stores flight data to - upper blocks of on-chip flash -* Tools Used - * [gEDA](http://www.gpleda.org/) for schematic capture and PCB layout - * [SDCC](http://sdcc.sourceforge.net/) compiler and source debugger -* Licenses - * The hardware is licensed under the [TAPR](http://www.tapr.org) [Open Hardware License](http://www.tapr.org/ohl.html) - * The software is licensed [GPL version 2](http://www.gnu.org/licenses/old-licenses/gpl-2.0.html) - -## Artifacts ## - -There is a single manual for TeleMini and all other Altus Metrum products, -which is available in [html](../AltOS/doc/altusmetrum.html) and -[pdf](../AltOS/doc/altusmetrum.pdf) formats. - -The hardware design files can be found on [git.gag.com](http://git.gag.com) -in the project [hw/telemini](http://git.gag.com/?p=hw/telemini;a=summary). - -For those who don't have ready access to the gEDA suite, here are pdf snapshots -of the files for Production PCB version 1.0 in more easily readable form. - -* [schematic](v1.0/telemini.pdf) -* [pcb artwork](v1.0/telemini.pcb.pdf) -* [bill of materials](v1.0/partslist.csv) + * [Version 1.0](v1.0) — the original TeleMini, 0.5 x 1.5 inches + * [Version 1.2](v1.2) — the new TeleMini, 0.8 x 1.5 inches diff --git a/TeleMini/v1.0/index.mdwn b/TeleMini/v1.0/index.mdwn new file mode 100644 index 0000000..84215bb --- /dev/null +++ b/TeleMini/v1.0/index.mdwn @@ -0,0 +1,69 @@ +# TeleMini Version 1.0 # + +This is a very small, baro-only recording dual-deploy altimeter for +model rocketry with integrated telemetry link. + +Production units are available from the +[Garbee and Garbee](http://auric.gag.com) web +store. TeleMini starter kits are also available from +[Apogee Components](http://www.apogeerockets.com/Altus_Metrum_telemini.asp). + +For the latest TeleMini firmware and related ground station software, please +visit the [AltOS](../AltOS) page on this site. + +These are photos of our current production version: + + + + +## Features ## + +### User View ### + +* Recording altimeter for model rocketry +* Supports dual deployment (can fire 2 ejection charges) +* 70cm ham-band transceiver for telemetry downlink +* Barometric pressure sensor good to 45k feet MSL +* Designed to use a single LiPo rechargeable battery +* 1.5 x 0.5 inch board designed to fit inside 18mm airframe coupler tube + +### Developer View ### + +* Hardware Features + * [TI CC1111F32](http://focus.ti.com/docs/prod/folders/print/cc1111f32.html) Low Power RF System-on-Chip + * Sub-1Ghz transceiver + * 8051 MCU + * 32k Flash + * 4k RAM + * USB 2.0 + * 6 12-bit analog inputs (11 bits with single-ended sensors) + * 2 channels of serial I/O + * digital I/O + * [Freescale MP3H6115A](http://www.freescale.com/webapp/search.partparamdetail.framework?PART_NUMBER=MP3H6115A6U) pressure sensor +* Software Features + * Written mostly in C with some 8051 assembler + * Runs from on-chip flash, uses on-chip RAM, stores flight data to + upper blocks of on-chip flash +* Tools Used + * [gEDA](http://www.gpleda.org/) for schematic capture and PCB layout + * [SDCC](http://sdcc.sourceforge.net/) compiler and source debugger +* Licenses + * The hardware is licensed under the [TAPR](http://www.tapr.org) [Open Hardware License](http://www.tapr.org/ohl.html) + * The software is licensed [GPL version 2](http://www.gnu.org/licenses/old-licenses/gpl-2.0.html) + +## Artifacts ## + +There is a single manual for TeleMini and all other Altus Metrum products, +which is available in [html](../AltOS/doc/altusmetrum.html) and +[pdf](../AltOS/doc/altusmetrum.pdf) formats. + +The hardware design files can be found on [git.gag.com](http://git.gag.com) +in the project [hw/telemini](http://git.gag.com/?p=hw/telemini;a=summary). + +For those who don't have ready access to the gEDA suite, here are pdf snapshots +of the files for Production PCB version 1.0 in more easily readable form. + +* [schematic](telemini.pdf) +* [pcb artwork](telemini.pcb.pdf) +* [bill of materials](partslist.csv) + diff --git a/TeleMini/v1.2.mdwn b/TeleMini/v1.2.mdwn new file mode 100644 index 0000000..b1b4a5a --- /dev/null +++ b/TeleMini/v1.2.mdwn @@ -0,0 +1 @@ +[[!map pages="TeleMini/v1.2/* and ! TeleMini/v1.2/*/*"]] diff --git a/TeleMini/v1.2/index.mdwn b/TeleMini/v1.2/index.mdwn new file mode 100644 index 0000000..00950f6 --- /dev/null +++ b/TeleMini/v1.2/index.mdwn @@ -0,0 +1,65 @@ +# TeleMini Version 1.2 # + +This is a small, baro-only recording dual-deploy altimeter for +model rocketry with integrated telemetry link. It's different from the +original TeleMini: + + * Supports batteries from 3.7V - 12V + * Screw terminals for switch and external battery + * Large on-board flash for data recording + * Built-in USB connector for configuration and data download + * High precision and digital barometric sensor + +For the latest TeleMini firmware and related ground station software, please +visit the [AltOS](../AltOS) page on this site. + +These are photos of our current prototype version: + + + + +## Features ## + +### User View ### + +* Recording altimeter for model rocketry +* Supports dual deployment (can fire 2 ejection charges) +* 70cm ham-band transceiver for telemetry downlink +* Barometric pressure sensor good to 100k' feet MSL +* Designed to use any battery from 3.7 - 12V +* 1.5 x 0.8 inch board designed to fit inside 24mm airframe coupler tube + +### Developer View ### + +* Hardware Features + * [TI CC1111F32](http://focus.ti.com/docs/prod/folders/print/cc1111f32.html) Low Power RF System-on-Chip + * Sub-1Ghz transceiver + * 8051 MCU + * 32k Flash + * 4k RAM + * USB 2.0 + * 6 12-bit analog inputs (11 bits with single-ended sensors) + * 2 channels of serial I/O + * digital I/O + * [Measurement Specialties MS5607](http://www.meas-spec.com/product/pressure/MS5607-02BA03.aspx) pressure sensor + * 1MB SPI flash +* Software Features + * Written mostly in C with some 8051 assembler + * Runs from on-chip flash, uses on-chip RAM, stores flight data to + on-board flash memory +* Tools Used + * [gEDA](http://www.gpleda.org/) for schematic capture and PCB layout + * [SDCC](http://sdcc.sourceforge.net/) compiler and source debugger +* Licenses + * The hardware is licensed under the [TAPR](http://www.tapr.org) [Open Hardware License](http://www.tapr.org/ohl.html) + * The software is licensed [GPL version 2](http://www.gnu.org/licenses/old-licenses/gpl-2.0.html) + +## Artifacts ## + +There is a single manual for TeleMini and all other Altus Metrum products, +which is available in [html](../AltOS/doc/altusmetrum.html) and +[pdf](../AltOS/doc/altusmetrum.pdf) formats. + +The hardware design files can be found on [git.gag.com](http://git.gag.com) +in the project [hw/telemini](http://git.gag.com/?p=hw/telemini;a=summary). + diff --git a/TeleMini/v1.2/telemini-parts-thumb.jpg b/TeleMini/v1.2/telemini-parts-thumb.jpg new file mode 100644 index 0000000..cc56555 Binary files /dev/null and b/TeleMini/v1.2/telemini-parts-thumb.jpg differ diff --git a/TeleMini/v1.2/telemini-parts.jpg b/TeleMini/v1.2/telemini-parts.jpg new file mode 100644 index 0000000..08adf3b Binary files /dev/null and b/TeleMini/v1.2/telemini-parts.jpg differ diff --git a/TeleMini/v1.2/telemini-top-thumb.jpg b/TeleMini/v1.2/telemini-top-thumb.jpg new file mode 100644 index 0000000..aa47526 Binary files /dev/null and b/TeleMini/v1.2/telemini-top-thumb.jpg differ diff --git a/TeleMini/v1.2/telemini-top.jpg b/TeleMini/v1.2/telemini-top.jpg new file mode 100644 index 0000000..bc8ae45 Binary files /dev/null and b/TeleMini/v1.2/telemini-top.jpg differ diff --git a/production.mdwn b/production.mdwn index 96f10ad..1bdbe64 100644 --- a/production.mdwn +++ b/production.mdwn @@ -334,3 +334,7 @@ Production run of 108 pieces of TeleMetrum v1.2b by Production run of 120 pieces of TeleBT v1.0 by [Advanced Circuits](http://4pcb.com), received 2013.04.08. + +## sn 92 ## + +TeleMini v1.1 2013.08.25. From Phoenix panel. -- cgit v1.2.3