From 9e4ed6b973023763c43a30ead7a3943a30a8367b Mon Sep 17 00:00:00 2001 From: Bdale Garbee Date: Sun, 10 Jan 2016 18:18:43 -0700 Subject: creating index page TeleMega/v2.0 --- TeleMega/v2.0.mdwn | 1 + 1 file changed, 1 insertion(+) create mode 100644 TeleMega/v2.0.mdwn diff --git a/TeleMega/v2.0.mdwn b/TeleMega/v2.0.mdwn new file mode 100644 index 0000000..573ccb3 --- /dev/null +++ b/TeleMega/v2.0.mdwn @@ -0,0 +1 @@ +[[!map pages="TeleMega/v2.0/* and ! TeleMega/v2.0/*/*"]] -- cgit v1.2.3 From 85ed8e12ab27d697d5259f793f20486ff8a7d496 Mon Sep 17 00:00:00 2001 From: Keith Packard Date: Sun, 10 Jan 2016 17:38:15 -0800 Subject: Revert "update TeleMini page" This reverts commit 6cb872544688622d0e521b4da04848255d6779d7. --- TeleMini/index.mdwn | 16 ++++------------ 1 file changed, 4 insertions(+), 12 deletions(-) diff --git a/TeleMini/index.mdwn b/TeleMini/index.mdwn index 4383179..495ab45 100644 --- a/TeleMini/index.mdwn +++ b/TeleMini/index.mdwn @@ -1,16 +1,14 @@ # TeleMini # TeleMini version 2.0 is a small, baro-only recording dual-deploy -altimeter for model rocketry with integrated telemetry link. The board -form factor and features are identical to [EasyMini](../EasyMini/), with the -addition of radio telemetry and direction finding. TeleMini is an excellent -choice for mid-power and smaller high-power rockets, and can also be a -cost-effective solution for booster recovery in multi-stage projects, etc. +altimeter for model rocketry with integrated telemetry link. It's +currently in development, with production planned to start in the fall +of 2013. For the latest TeleMini firmware and related ground station software, please visit the [AltOS](../AltOS) page on this site. -These are photos of an early prototype version: +These are photos of our current prototype version: @@ -66,9 +64,3 @@ The hardware design files can be found on [git.gag.com](http://git.gag.com) in the project [hw/telemini](http://git.gag.com/?p=hw/telemini;a=summary). ## [History of TeleMini](history) ## - -## Future Plans ## - -Our current prototypes mostly work, but there are a couple issues yet to -resolve. We hope to complete this design and put TeleMini v2.0 into production -sometime in mid-2014. -- cgit v1.2.3 From 6d0357f5999428c242cf4271fadb1a8ccc4eabcc Mon Sep 17 00:00:00 2001 From: Keith Packard Date: Sun, 10 Jan 2016 17:38:27 -0800 Subject: Revert "Typo in the outline PDF references" This reverts commit 4b972e0a6fd938d6fe81a44d317699f2a8c0993e. --- TeleMini/index.mdwn | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/TeleMini/index.mdwn b/TeleMini/index.mdwn index 495ab45..2b0d841 100644 --- a/TeleMini/index.mdwn +++ b/TeleMini/index.mdwn @@ -58,7 +58,7 @@ which is available in [html](../AltOS/doc/altusmetrum.html) and [pdf](../AltOS/doc/altusmetrum.pdf) formats. An outline of the board with drill hole locations is available in -[pdf](../Documents/easymini-outline.pdf) format. +[pdf](../Documents/easymini-outline.pdf] format. The hardware design files can be found on [git.gag.com](http://git.gag.com) in the project [hw/telemini](http://git.gag.com/?p=hw/telemini;a=summary). -- cgit v1.2.3 From 993f13dea7fb9263b8eacfc77bec491cac0523c6 Mon Sep 17 00:00:00 2001 From: Keith Packard Date: Sun, 10 Jan 2016 17:39:00 -0800 Subject: Revert "Rename TeleMini 1.2 -> 2.0" This reverts commit 8590f5849054a9a57553e0e7c1ee828621a3ba1e. --- TeleMini/index.mdwn | 6 +++--- TeleMini/v1.2/telemini-parts-thumb.jpg | Bin 0 -> 112479 bytes TeleMini/v1.2/telemini-parts.jpg | Bin 0 -> 1032315 bytes TeleMini/v1.2/telemini-top-thumb.jpg | Bin 0 -> 71878 bytes TeleMini/v1.2/telemini-top.jpg | Bin 0 -> 579692 bytes TeleMini/v2.0/telemini-parts-thumb.jpg | Bin 112479 -> 0 bytes TeleMini/v2.0/telemini-parts.jpg | Bin 1032315 -> 0 bytes TeleMini/v2.0/telemini-top-thumb.jpg | Bin 71878 -> 0 bytes TeleMini/v2.0/telemini-top.jpg | Bin 579692 -> 0 bytes 9 files changed, 3 insertions(+), 3 deletions(-) create mode 100644 TeleMini/v1.2/telemini-parts-thumb.jpg create mode 100644 TeleMini/v1.2/telemini-parts.jpg create mode 100644 TeleMini/v1.2/telemini-top-thumb.jpg create mode 100644 TeleMini/v1.2/telemini-top.jpg delete mode 100644 TeleMini/v2.0/telemini-parts-thumb.jpg delete mode 100644 TeleMini/v2.0/telemini-parts.jpg delete mode 100644 TeleMini/v2.0/telemini-top-thumb.jpg delete mode 100644 TeleMini/v2.0/telemini-top.jpg diff --git a/TeleMini/index.mdwn b/TeleMini/index.mdwn index 2b0d841..2f7f900 100644 --- a/TeleMini/index.mdwn +++ b/TeleMini/index.mdwn @@ -1,6 +1,6 @@ # TeleMini # -TeleMini version 2.0 is a small, baro-only recording dual-deploy +TeleMini version 1.2 is a small, baro-only recording dual-deploy altimeter for model rocketry with integrated telemetry link. It's currently in development, with production planned to start in the fall of 2013. @@ -10,8 +10,8 @@ visit the [AltOS](../AltOS) page on this site. These are photos of our current prototype version: - - + + ## Features ## diff --git a/TeleMini/v1.2/telemini-parts-thumb.jpg b/TeleMini/v1.2/telemini-parts-thumb.jpg new file mode 100644 index 0000000..cc56555 Binary files /dev/null and b/TeleMini/v1.2/telemini-parts-thumb.jpg differ diff --git a/TeleMini/v1.2/telemini-parts.jpg b/TeleMini/v1.2/telemini-parts.jpg new file mode 100644 index 0000000..08adf3b Binary files /dev/null and b/TeleMini/v1.2/telemini-parts.jpg differ diff --git a/TeleMini/v1.2/telemini-top-thumb.jpg b/TeleMini/v1.2/telemini-top-thumb.jpg new file mode 100644 index 0000000..aa47526 Binary files /dev/null and b/TeleMini/v1.2/telemini-top-thumb.jpg differ diff --git a/TeleMini/v1.2/telemini-top.jpg b/TeleMini/v1.2/telemini-top.jpg new file mode 100644 index 0000000..bc8ae45 Binary files /dev/null and b/TeleMini/v1.2/telemini-top.jpg differ diff --git a/TeleMini/v2.0/telemini-parts-thumb.jpg b/TeleMini/v2.0/telemini-parts-thumb.jpg deleted file mode 100644 index cc56555..0000000 Binary files a/TeleMini/v2.0/telemini-parts-thumb.jpg and /dev/null differ diff --git a/TeleMini/v2.0/telemini-parts.jpg b/TeleMini/v2.0/telemini-parts.jpg deleted file mode 100644 index 08adf3b..0000000 Binary files a/TeleMini/v2.0/telemini-parts.jpg and /dev/null differ diff --git a/TeleMini/v2.0/telemini-top-thumb.jpg b/TeleMini/v2.0/telemini-top-thumb.jpg deleted file mode 100644 index aa47526..0000000 Binary files a/TeleMini/v2.0/telemini-top-thumb.jpg and /dev/null differ diff --git a/TeleMini/v2.0/telemini-top.jpg b/TeleMini/v2.0/telemini-top.jpg deleted file mode 100644 index bc8ae45..0000000 Binary files a/TeleMini/v2.0/telemini-top.jpg and /dev/null differ -- cgit v1.2.3 From 608d0c2811abb1d8c8d1f03c5701fd67a457b778 Mon Sep 17 00:00:00 2001 From: Keith Packard Date: Sun, 10 Jan 2016 17:40:19 -0800 Subject: Revert "Move telemini v1.2 content to telemini page, v1.0 to history" This reverts commit 3a81e79502998f3ce3467677fb29df959f4fb512. --- TeleMini/history.mdwn | 62 ------------------------------------------- TeleMini/index.mdwn | 65 +++------------------------------------------ TeleMini/v1.0/index.mdwn | 69 ++++++++++++++++++++++++++++++++++++++++++++++++ TeleMini/v1.2/index.mdwn | 65 +++++++++++++++++++++++++++++++++++++++++++++ 4 files changed, 137 insertions(+), 124 deletions(-) delete mode 100644 TeleMini/history.mdwn create mode 100644 TeleMini/v1.0/index.mdwn create mode 100644 TeleMini/v1.2/index.mdwn diff --git a/TeleMini/history.mdwn b/TeleMini/history.mdwn deleted file mode 100644 index 8074dd4..0000000 --- a/TeleMini/history.mdwn +++ /dev/null @@ -1,62 +0,0 @@ -# TeleMini History - -# TeleMini Version 1.0 # - -The very first TeleMini design became 1.0. It was a very small, -baro-only recording dual-deploy altimeter for model rocketry with -integrated telemetry link. - - - - -## Features ## - -### User View ### - -* Recording altimeter for model rocketry -* Supports dual deployment (can fire 2 ejection charges) -* 70cm ham-band transceiver for telemetry downlink -* Barometric pressure sensor good to 45k feet MSL -* Designed to use a single LiPo rechargeable battery -* 1.5 x 0.5 inch board designed to fit inside 18mm airframe coupler tube - -### Developer View ### - -* Hardware Features - * [TI CC1111F32](http://focus.ti.com/docs/prod/folders/print/cc1111f32.html) Low Power RF System-on-Chip - * Sub-1Ghz transceiver - * 8051 MCU - * 32k Flash - * 4k RAM - * USB 2.0 - * 6 12-bit analog inputs (11 bits with single-ended sensors) - * 2 channels of serial I/O - * digital I/O - * [Freescale MP3H6115A](http://www.freescale.com/webapp/search.partparamdetail.framework?PART_NUMBER=MP3H6115A6U) pressure sensor -* Software Features - * Written mostly in C with some 8051 assembler - * Runs from on-chip flash, uses on-chip RAM, stores flight data to - upper blocks of on-chip flash -* Tools Used - * [gEDA](http://www.gpleda.org/) for schematic capture and PCB layout - * [SDCC](http://sdcc.sourceforge.net/) compiler and source debugger -* Licenses - * The hardware is licensed under the [TAPR](http://www.tapr.org) [Open Hardware License](http://www.tapr.org/ohl.html) - * The software is licensed [GPL version 2](http://www.gnu.org/licenses/old-licenses/gpl-2.0.html) - -## Artifacts ## - -There is a single manual for TeleMini and all other Altus Metrum products, -which is available in [html](../AltOS/doc/altusmetrum.html) and -[pdf](../AltOS/doc/altusmetrum.pdf) formats. - -The hardware design files can be found on [git.gag.com](http://git.gag.com) -in the project [hw/telemini](http://git.gag.com/?p=hw/telemini;a=summary). - -For those who don't have ready access to the gEDA suite, here are pdf snapshots -of the files for Production PCB version 1.0 in more easily readable form. - -* [schematic](v1.0/telemini.pdf) -* [pcb artwork](v1.0/telemini.pcb.pdf) -* [bill of materials](v1.0/partslist.csv) - diff --git a/TeleMini/index.mdwn b/TeleMini/index.mdwn index 2f7f900..21b3822 100644 --- a/TeleMini/index.mdwn +++ b/TeleMini/index.mdwn @@ -1,66 +1,7 @@ # TeleMini # -TeleMini version 1.2 is a small, baro-only recording dual-deploy -altimeter for model rocketry with integrated telemetry link. It's -currently in development, with production planned to start in the fall -of 2013. +There are two versions of TeleMini: -For the latest TeleMini firmware and related ground station software, please -visit the [AltOS](../AltOS) page on this site. + * [Version 1.0](v1.0) — the original TeleMini, 0.5 x 1.5 inches + * [Version 1.2](v1.2) — the new TeleMini, 0.8 x 1.5 inches -These are photos of our current prototype version: - - - - -## Features ## - -### User View ### - - * Recording altimeter for model rocketry - * Supports dual deployment (can fire 2 ejection charges) - * 70cm ham-band transceiver for telemetry downlink - * Barometric pressure sensor good to 100k' feet MSL - * Designed to use any battery from 3.7 - 12V - * Screw terminals for pyro connectors, switch and external battery - * Built-in USB connector for configuration and data download - * 1.5 x 0.8 inch board designed to fit inside 24mm airframe coupler tube - -### Developer View ### - -* Hardware Features - * [TI CC1111F32](http://focus.ti.com/docs/prod/folders/print/cc1111f32.html) Low Power RF System-on-Chip - * Sub-1Ghz transceiver - * 8051 MCU - * 32k Flash - * 4k RAM - * USB 2.0 - * 6 12-bit analog inputs (11 bits with single-ended sensors) - * 2 channels of serial I/O - * digital I/O - * [Measurement Specialties MS5607](http://www.meas-spec.com/product/pressure/MS5607-02BA03.aspx) pressure sensor - * 1MB SPI flash -* Software Features - * Written mostly in C with some 8051 assembler - * Runs from on-chip flash, uses on-chip RAM, stores flight data to - on-board flash memory -* Tools Used - * [gEDA](http://www.gpleda.org/) for schematic capture and PCB layout - * [SDCC](http://sdcc.sourceforge.net/) compiler and source debugger -* Licenses - * The hardware is licensed under the [TAPR](http://www.tapr.org) [Open Hardware License](http://www.tapr.org/ohl.html) - * The software is licensed [GPL version 2](http://www.gnu.org/licenses/old-licenses/gpl-2.0.html) - -## Artifacts ## - -There is a single manual for TeleMini and all other Altus Metrum products, -which is available in [html](../AltOS/doc/altusmetrum.html) and -[pdf](../AltOS/doc/altusmetrum.pdf) formats. - -An outline of the board with drill hole locations is available in -[pdf](../Documents/easymini-outline.pdf] format. - -The hardware design files can be found on [git.gag.com](http://git.gag.com) -in the project [hw/telemini](http://git.gag.com/?p=hw/telemini;a=summary). - -## [History of TeleMini](history) ## diff --git a/TeleMini/v1.0/index.mdwn b/TeleMini/v1.0/index.mdwn new file mode 100644 index 0000000..84215bb --- /dev/null +++ b/TeleMini/v1.0/index.mdwn @@ -0,0 +1,69 @@ +# TeleMini Version 1.0 # + +This is a very small, baro-only recording dual-deploy altimeter for +model rocketry with integrated telemetry link. + +Production units are available from the +[Garbee and Garbee](http://auric.gag.com) web +store. TeleMini starter kits are also available from +[Apogee Components](http://www.apogeerockets.com/Altus_Metrum_telemini.asp). + +For the latest TeleMini firmware and related ground station software, please +visit the [AltOS](../AltOS) page on this site. + +These are photos of our current production version: + + + + +## Features ## + +### User View ### + +* Recording altimeter for model rocketry +* Supports dual deployment (can fire 2 ejection charges) +* 70cm ham-band transceiver for telemetry downlink +* Barometric pressure sensor good to 45k feet MSL +* Designed to use a single LiPo rechargeable battery +* 1.5 x 0.5 inch board designed to fit inside 18mm airframe coupler tube + +### Developer View ### + +* Hardware Features + * [TI CC1111F32](http://focus.ti.com/docs/prod/folders/print/cc1111f32.html) Low Power RF System-on-Chip + * Sub-1Ghz transceiver + * 8051 MCU + * 32k Flash + * 4k RAM + * USB 2.0 + * 6 12-bit analog inputs (11 bits with single-ended sensors) + * 2 channels of serial I/O + * digital I/O + * [Freescale MP3H6115A](http://www.freescale.com/webapp/search.partparamdetail.framework?PART_NUMBER=MP3H6115A6U) pressure sensor +* Software Features + * Written mostly in C with some 8051 assembler + * Runs from on-chip flash, uses on-chip RAM, stores flight data to + upper blocks of on-chip flash +* Tools Used + * [gEDA](http://www.gpleda.org/) for schematic capture and PCB layout + * [SDCC](http://sdcc.sourceforge.net/) compiler and source debugger +* Licenses + * The hardware is licensed under the [TAPR](http://www.tapr.org) [Open Hardware License](http://www.tapr.org/ohl.html) + * The software is licensed [GPL version 2](http://www.gnu.org/licenses/old-licenses/gpl-2.0.html) + +## Artifacts ## + +There is a single manual for TeleMini and all other Altus Metrum products, +which is available in [html](../AltOS/doc/altusmetrum.html) and +[pdf](../AltOS/doc/altusmetrum.pdf) formats. + +The hardware design files can be found on [git.gag.com](http://git.gag.com) +in the project [hw/telemini](http://git.gag.com/?p=hw/telemini;a=summary). + +For those who don't have ready access to the gEDA suite, here are pdf snapshots +of the files for Production PCB version 1.0 in more easily readable form. + +* [schematic](telemini.pdf) +* [pcb artwork](telemini.pcb.pdf) +* [bill of materials](partslist.csv) + diff --git a/TeleMini/v1.2/index.mdwn b/TeleMini/v1.2/index.mdwn new file mode 100644 index 0000000..00950f6 --- /dev/null +++ b/TeleMini/v1.2/index.mdwn @@ -0,0 +1,65 @@ +# TeleMini Version 1.2 # + +This is a small, baro-only recording dual-deploy altimeter for +model rocketry with integrated telemetry link. It's different from the +original TeleMini: + + * Supports batteries from 3.7V - 12V + * Screw terminals for switch and external battery + * Large on-board flash for data recording + * Built-in USB connector for configuration and data download + * High precision and digital barometric sensor + +For the latest TeleMini firmware and related ground station software, please +visit the [AltOS](../AltOS) page on this site. + +These are photos of our current prototype version: + + + + +## Features ## + +### User View ### + +* Recording altimeter for model rocketry +* Supports dual deployment (can fire 2 ejection charges) +* 70cm ham-band transceiver for telemetry downlink +* Barometric pressure sensor good to 100k' feet MSL +* Designed to use any battery from 3.7 - 12V +* 1.5 x 0.8 inch board designed to fit inside 24mm airframe coupler tube + +### Developer View ### + +* Hardware Features + * [TI CC1111F32](http://focus.ti.com/docs/prod/folders/print/cc1111f32.html) Low Power RF System-on-Chip + * Sub-1Ghz transceiver + * 8051 MCU + * 32k Flash + * 4k RAM + * USB 2.0 + * 6 12-bit analog inputs (11 bits with single-ended sensors) + * 2 channels of serial I/O + * digital I/O + * [Measurement Specialties MS5607](http://www.meas-spec.com/product/pressure/MS5607-02BA03.aspx) pressure sensor + * 1MB SPI flash +* Software Features + * Written mostly in C with some 8051 assembler + * Runs from on-chip flash, uses on-chip RAM, stores flight data to + on-board flash memory +* Tools Used + * [gEDA](http://www.gpleda.org/) for schematic capture and PCB layout + * [SDCC](http://sdcc.sourceforge.net/) compiler and source debugger +* Licenses + * The hardware is licensed under the [TAPR](http://www.tapr.org) [Open Hardware License](http://www.tapr.org/ohl.html) + * The software is licensed [GPL version 2](http://www.gnu.org/licenses/old-licenses/gpl-2.0.html) + +## Artifacts ## + +There is a single manual for TeleMini and all other Altus Metrum products, +which is available in [html](../AltOS/doc/altusmetrum.html) and +[pdf](../AltOS/doc/altusmetrum.pdf) formats. + +The hardware design files can be found on [git.gag.com](http://git.gag.com) +in the project [hw/telemini](http://git.gag.com/?p=hw/telemini;a=summary). + -- cgit v1.2.3 From 868f49f7aacea076c4c26b370234dc2a2a61a905 Mon Sep 17 00:00:00 2001 From: Keith Packard Date: Sun, 10 Jan 2016 17:46:47 -0800 Subject: Revert "Split TeleMini into two pages, one for 1.0 and another for 1.2" This reverts commit 3e4db088f70295b7771917a8ad4141321631bf26. --- TeleMini/index.mdwn | 70 +++++++++++++++++++++++++++++++-- TeleMini/v1.0/index.mdwn | 69 -------------------------------- TeleMini/v1.2.mdwn | 1 - TeleMini/v1.2/index.mdwn | 65 ------------------------------ TeleMini/v1.2/telemini-parts-thumb.jpg | Bin 112479 -> 0 bytes TeleMini/v1.2/telemini-parts.jpg | Bin 1032315 -> 0 bytes TeleMini/v1.2/telemini-top-thumb.jpg | Bin 71878 -> 0 bytes TeleMini/v1.2/telemini-top.jpg | Bin 579692 -> 0 bytes 8 files changed, 66 insertions(+), 139 deletions(-) delete mode 100644 TeleMini/v1.0/index.mdwn delete mode 100644 TeleMini/v1.2.mdwn delete mode 100644 TeleMini/v1.2/index.mdwn delete mode 100644 TeleMini/v1.2/telemini-parts-thumb.jpg delete mode 100644 TeleMini/v1.2/telemini-parts.jpg delete mode 100644 TeleMini/v1.2/telemini-top-thumb.jpg delete mode 100644 TeleMini/v1.2/telemini-top.jpg diff --git a/TeleMini/index.mdwn b/TeleMini/index.mdwn index 21b3822..5a783cb 100644 --- a/TeleMini/index.mdwn +++ b/TeleMini/index.mdwn @@ -1,7 +1,69 @@ -# TeleMini # +# TeleMini -There are two versions of TeleMini: +This is a very small, baro-only recording dual-deploy altimeter for +model rocketry with integrated telemetry link. - * [Version 1.0](v1.0) — the original TeleMini, 0.5 x 1.5 inches - * [Version 1.2](v1.2) — the new TeleMini, 0.8 x 1.5 inches +Production units are available from the +[Garbee and Garbee](http://auric.gag.com) web +store. TeleMini starter kits are also available from +[Apogee Components](http://www.apogeerockets.com/Altus_Metrum_telemini.asp). + +For the latest TeleMini firmware and related ground station software, please +visit the [AltOS](../AltOS) page on this site. + +These are photos of our current production version: + + + + +## Features ## + +### User View ### + +* Recording altimeter for model rocketry +* Supports dual deployment (can fire 2 ejection charges) +* 70cm ham-band transceiver for telemetry downlink +* Barometric pressure sensor good to 45k feet MSL +* Designed to use a single LiPo rechargeable battery +* 1.5 x 0.5 inch board designed to fit inside 18mm airframe coupler tube + +### Developer View ### + +* Hardware Features + * [TI CC1111F32](http://focus.ti.com/docs/prod/folders/print/cc1111f32.html) Low Power RF System-on-Chip + * Sub-1Ghz transceiver + * 8051 MCU + * 32k Flash + * 4k RAM + * USB 2.0 + * 6 12-bit analog inputs (11 bits with single-ended sensors) + * 2 channels of serial I/O + * digital I/O + * [Freescale MP3H6115A](http://www.freescale.com/webapp/search.partparamdetail.framework?PART_NUMBER=MP3H6115A6U) pressure sensor +* Software Features + * Written mostly in C with some 8051 assembler + * Runs from on-chip flash, uses on-chip RAM, stores flight data to + upper blocks of on-chip flash +* Tools Used + * [gEDA](http://www.gpleda.org/) for schematic capture and PCB layout + * [SDCC](http://sdcc.sourceforge.net/) compiler and source debugger +* Licenses + * The hardware is licensed under the [TAPR](http://www.tapr.org) [Open Hardware License](http://www.tapr.org/ohl.html) + * The software is licensed [GPL version 2](http://www.gnu.org/licenses/old-licenses/gpl-2.0.html) + +## Artifacts ## + +There is a single manual for TeleMini and all other Altus Metrum products, +which is available in [html](../AltOS/doc/altusmetrum.html) and +[pdf](../AltOS/doc/altusmetrum.pdf) formats. + +The hardware design files can be found on [git.gag.com](http://git.gag.com) +in the project [hw/telemini](http://git.gag.com/?p=hw/telemini;a=summary). + +For those who don't have ready access to the gEDA suite, here are pdf snapshots +of the files for Production PCB version 1.0 in more easily readable form. + +* [schematic](v1.0/telemini.pdf) +* [pcb artwork](v1.0/telemini.pcb.pdf) +* [bill of materials](v1.0/partslist.csv) diff --git a/TeleMini/v1.0/index.mdwn b/TeleMini/v1.0/index.mdwn deleted file mode 100644 index 84215bb..0000000 --- a/TeleMini/v1.0/index.mdwn +++ /dev/null @@ -1,69 +0,0 @@ -# TeleMini Version 1.0 # - -This is a very small, baro-only recording dual-deploy altimeter for -model rocketry with integrated telemetry link. - -Production units are available from the -[Garbee and Garbee](http://auric.gag.com) web -store. TeleMini starter kits are also available from -[Apogee Components](http://www.apogeerockets.com/Altus_Metrum_telemini.asp). - -For the latest TeleMini firmware and related ground station software, please -visit the [AltOS](../AltOS) page on this site. - -These are photos of our current production version: - - - - -## Features ## - -### User View ### - -* Recording altimeter for model rocketry -* Supports dual deployment (can fire 2 ejection charges) -* 70cm ham-band transceiver for telemetry downlink -* Barometric pressure sensor good to 45k feet MSL -* Designed to use a single LiPo rechargeable battery -* 1.5 x 0.5 inch board designed to fit inside 18mm airframe coupler tube - -### Developer View ### - -* Hardware Features - * [TI CC1111F32](http://focus.ti.com/docs/prod/folders/print/cc1111f32.html) Low Power RF System-on-Chip - * Sub-1Ghz transceiver - * 8051 MCU - * 32k Flash - * 4k RAM - * USB 2.0 - * 6 12-bit analog inputs (11 bits with single-ended sensors) - * 2 channels of serial I/O - * digital I/O - * [Freescale MP3H6115A](http://www.freescale.com/webapp/search.partparamdetail.framework?PART_NUMBER=MP3H6115A6U) pressure sensor -* Software Features - * Written mostly in C with some 8051 assembler - * Runs from on-chip flash, uses on-chip RAM, stores flight data to - upper blocks of on-chip flash -* Tools Used - * [gEDA](http://www.gpleda.org/) for schematic capture and PCB layout - * [SDCC](http://sdcc.sourceforge.net/) compiler and source debugger -* Licenses - * The hardware is licensed under the [TAPR](http://www.tapr.org) [Open Hardware License](http://www.tapr.org/ohl.html) - * The software is licensed [GPL version 2](http://www.gnu.org/licenses/old-licenses/gpl-2.0.html) - -## Artifacts ## - -There is a single manual for TeleMini and all other Altus Metrum products, -which is available in [html](../AltOS/doc/altusmetrum.html) and -[pdf](../AltOS/doc/altusmetrum.pdf) formats. - -The hardware design files can be found on [git.gag.com](http://git.gag.com) -in the project [hw/telemini](http://git.gag.com/?p=hw/telemini;a=summary). - -For those who don't have ready access to the gEDA suite, here are pdf snapshots -of the files for Production PCB version 1.0 in more easily readable form. - -* [schematic](telemini.pdf) -* [pcb artwork](telemini.pcb.pdf) -* [bill of materials](partslist.csv) - diff --git a/TeleMini/v1.2.mdwn b/TeleMini/v1.2.mdwn deleted file mode 100644 index b1b4a5a..0000000 --- a/TeleMini/v1.2.mdwn +++ /dev/null @@ -1 +0,0 @@ -[[!map pages="TeleMini/v1.2/* and ! TeleMini/v1.2/*/*"]] diff --git a/TeleMini/v1.2/index.mdwn b/TeleMini/v1.2/index.mdwn deleted file mode 100644 index 00950f6..0000000 --- a/TeleMini/v1.2/index.mdwn +++ /dev/null @@ -1,65 +0,0 @@ -# TeleMini Version 1.2 # - -This is a small, baro-only recording dual-deploy altimeter for -model rocketry with integrated telemetry link. It's different from the -original TeleMini: - - * Supports batteries from 3.7V - 12V - * Screw terminals for switch and external battery - * Large on-board flash for data recording - * Built-in USB connector for configuration and data download - * High precision and digital barometric sensor - -For the latest TeleMini firmware and related ground station software, please -visit the [AltOS](../AltOS) page on this site. - -These are photos of our current prototype version: - - - - -## Features ## - -### User View ### - -* Recording altimeter for model rocketry -* Supports dual deployment (can fire 2 ejection charges) -* 70cm ham-band transceiver for telemetry downlink -* Barometric pressure sensor good to 100k' feet MSL -* Designed to use any battery from 3.7 - 12V -* 1.5 x 0.8 inch board designed to fit inside 24mm airframe coupler tube - -### Developer View ### - -* Hardware Features - * [TI CC1111F32](http://focus.ti.com/docs/prod/folders/print/cc1111f32.html) Low Power RF System-on-Chip - * Sub-1Ghz transceiver - * 8051 MCU - * 32k Flash - * 4k RAM - * USB 2.0 - * 6 12-bit analog inputs (11 bits with single-ended sensors) - * 2 channels of serial I/O - * digital I/O - * [Measurement Specialties MS5607](http://www.meas-spec.com/product/pressure/MS5607-02BA03.aspx) pressure sensor - * 1MB SPI flash -* Software Features - * Written mostly in C with some 8051 assembler - * Runs from on-chip flash, uses on-chip RAM, stores flight data to - on-board flash memory -* Tools Used - * [gEDA](http://www.gpleda.org/) for schematic capture and PCB layout - * [SDCC](http://sdcc.sourceforge.net/) compiler and source debugger -* Licenses - * The hardware is licensed under the [TAPR](http://www.tapr.org) [Open Hardware License](http://www.tapr.org/ohl.html) - * The software is licensed [GPL version 2](http://www.gnu.org/licenses/old-licenses/gpl-2.0.html) - -## Artifacts ## - -There is a single manual for TeleMini and all other Altus Metrum products, -which is available in [html](../AltOS/doc/altusmetrum.html) and -[pdf](../AltOS/doc/altusmetrum.pdf) formats. - -The hardware design files can be found on [git.gag.com](http://git.gag.com) -in the project [hw/telemini](http://git.gag.com/?p=hw/telemini;a=summary). - diff --git a/TeleMini/v1.2/telemini-parts-thumb.jpg b/TeleMini/v1.2/telemini-parts-thumb.jpg deleted file mode 100644 index cc56555..0000000 Binary files a/TeleMini/v1.2/telemini-parts-thumb.jpg and /dev/null differ diff --git a/TeleMini/v1.2/telemini-parts.jpg b/TeleMini/v1.2/telemini-parts.jpg deleted file mode 100644 index 08adf3b..0000000 Binary files a/TeleMini/v1.2/telemini-parts.jpg and /dev/null differ diff --git a/TeleMini/v1.2/telemini-top-thumb.jpg b/TeleMini/v1.2/telemini-top-thumb.jpg deleted file mode 100644 index aa47526..0000000 Binary files a/TeleMini/v1.2/telemini-top-thumb.jpg and /dev/null differ diff --git a/TeleMini/v1.2/telemini-top.jpg b/TeleMini/v1.2/telemini-top.jpg deleted file mode 100644 index bc8ae45..0000000 Binary files a/TeleMini/v1.2/telemini-top.jpg and /dev/null differ -- cgit v1.2.3 From 778d935a2374be6e293ac17c2a66b696327073d3 Mon Sep 17 00:00:00 2001 From: Keith Packard Date: Sun, 10 Jan 2016 17:52:54 -0800 Subject: TeleMini: Add reference to v1.0 outline Signed-off-by: Keith Packard --- TeleMini/index.mdwn | 3 +++ 1 file changed, 3 insertions(+) diff --git a/TeleMini/index.mdwn b/TeleMini/index.mdwn index 5a783cb..16ea8b3 100644 --- a/TeleMini/index.mdwn +++ b/TeleMini/index.mdwn @@ -57,6 +57,9 @@ There is a single manual for TeleMini and all other Altus Metrum products, which is available in [html](../AltOS/doc/altusmetrum.html) and [pdf](../AltOS/doc/altusmetrum.pdf) formats. +An outline of the board with drill hole locations is available in +[pdf](../Documents/telemini-outline.pdf) format. + The hardware design files can be found on [git.gag.com](http://git.gag.com) in the project [hw/telemini](http://git.gag.com/?p=hw/telemini;a=summary). -- cgit v1.2.3 From 1ad0cd25e494994d686de8368b9b18d29f6fa276 Mon Sep 17 00:00:00 2001 From: Keith Packard Date: Sun, 10 Jan 2016 17:53:27 -0800 Subject: easymega: link to outline pdf file Signed-off-by: Keith Packard --- EasyMega/index.mdwn | 3 +++ 1 file changed, 3 insertions(+) diff --git a/EasyMega/index.mdwn b/EasyMega/index.mdwn index e180f1a..1eba3d7 100644 --- a/EasyMega/index.mdwn +++ b/EasyMega/index.mdwn @@ -72,6 +72,9 @@ There is a single manual for EasyMega and most other Altus Metrum products, which is available in [html](../AltOS/doc/altusmetrum.html) and [pdf](../AltOS/doc/altusmetrum.pdf) formats. +An outline of the board with drill hole locations is available in +[pdf](../Documents/easymega-outline.pdf) format. + The hardware design current gEDA files are available from [git.gag.com](http://git.gag.com) in the project [hw/easymega](http://git.gag.com/?p=hw/easymega;a=summary). -- cgit v1.2.3 From 08b3987d18a7e09bf42dcb215e916167ee90ac97 Mon Sep 17 00:00:00 2001 From: Keith Packard Date: Sun, 10 Jan 2016 17:56:12 -0800 Subject: TeleMini: Remove dangling v2.0.mdwn file Left over from reverting the rest of the TeleMini back to v1.0 Signed-off-by: Keith Packard --- TeleMini/v2.0.mdwn | 1 - 1 file changed, 1 deletion(-) delete mode 100644 TeleMini/v2.0.mdwn diff --git a/TeleMini/v2.0.mdwn b/TeleMini/v2.0.mdwn deleted file mode 100644 index bc7a228..0000000 --- a/TeleMini/v2.0.mdwn +++ /dev/null @@ -1 +0,0 @@ -[[!map pages="TeleMini/v2.0/* and ! TeleMini/v2.0/*/*"]] -- cgit v1.2.3