1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
|
/*
* Copyright © 2009 Keith Packard <keithp@keithp.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
*/
#include "ao.h"
volatile __xdata struct ao_fifo ao_usart1_rx_fifo;
volatile __xdata struct ao_fifo ao_usart1_tx_fifo;
void
ao_serial_rx1_isr(void) interrupt 3
{
if (!ao_fifo_full(ao_usart1_rx_fifo))
ao_fifo_insert(ao_usart1_rx_fifo, U1DBUF);
ao_wakeup(&ao_usart1_rx_fifo);
}
static __xdata uint8_t ao_serial_tx1_started;
static void
ao_serial_tx1_start(void)
{
if (!ao_fifo_empty(ao_usart1_tx_fifo) &&
!ao_serial_tx1_started)
{
ao_serial_tx1_started = 1;
ao_fifo_remove(ao_usart1_tx_fifo, U1DBUF);
}
}
void
ao_serial_tx1_isr(void) interrupt 14
{
UTX1IF = 0;
ao_serial_tx1_started = 0;
ao_serial_tx1_start();
ao_wakeup(&ao_usart1_tx_fifo);
}
char
ao_serial_getchar(void) __critical
{
char c;
while (ao_fifo_empty(ao_usart1_rx_fifo))
ao_sleep(&ao_usart1_rx_fifo);
ao_fifo_remove(ao_usart1_rx_fifo, c);
return c;
}
void
ao_serial_putchar(char c) __critical
{
while (ao_fifo_full(ao_usart1_tx_fifo))
ao_sleep(&ao_usart1_tx_fifo);
ao_fifo_insert(ao_usart1_tx_fifo, c);
ao_serial_tx1_start();
}
static void
send_serial(void)
{
ao_cmd_white();
while (ao_cmd_lex_c != '\n') {
ao_serial_putchar(ao_cmd_lex_c);
ao_cmd_lex();
}
}
__code struct ao_cmds ao_serial_cmds[] = {
{ 'S', send_serial, "S <data> Send data to serial line" },
{ 0, send_serial, NULL },
};
void
ao_serial_init(void)
{
/* Set up the USART pin assignment */
PERCFG = (PERCFG & ~PERCFG_U1CFG_ALT_MASK) | PERCFG_U1CFG_ALT_2;
/* ee has already set the P2SEL bits */
/* Make the USART pins be controlled by the USART */
P1SEL |= (1 << 6) | (1 << 7);
/* UART mode with receiver enabled */
U1CSR = (UxCSR_MODE_UART | UxCSR_RE);
/* Pick a 4800 baud rate */
U1BAUD = 163; /* 4800 */
U1GCR = 7 << UxGCR_BAUD_E_SHIFT; /* 4800 */
/* Reasonable serial parameters */
U1UCR = (UxUCR_FLUSH |
UxUCR_FLOW_DISABLE |
UxUCR_D9_ODD_PARITY |
UxUCR_BIT9_8_BITS |
UxUCR_PARITY_DISABLE |
UxUCR_SPB_1_STOP_BIT |
UxUCR_STOP_HIGH |
UxUCR_START_LOW);
IEN0 |= IEN0_URX1IE;
IEN2 |= IEN2_UTX1IE;
ao_cmd_register(&ao_serial_cmds[0]);
}
|
