/* * Copyright © 2012 Keith Packard * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, but * WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * General Public License for more details. * * You should have received a copy of the GNU General Public License along * with this program; if not, write to the Free Software Foundation, Inc., * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. */ #ifndef _AO_PINS_H_ #define _AO_PINS_H_ /* 8MHz High speed external crystal */ #define AO_HSE 8000000 /* PLLVCO = 96MHz (so that USB will work) */ #define AO_PLLMUL 12 #define AO_RCC_CFGR_PLLMUL (STM_RCC_CFGR_PLLMUL_12) #define AO_CC1200_FOSC 40000000 /* SYSCLK = 32MHz (no need to go faster than CPU) */ #define AO_PLLDIV 3 #define AO_RCC_CFGR_PLLDIV (STM_RCC_CFGR_PLLDIV_3) /* HCLK = 32MHz (CPU clock) */ #define AO_AHB_PRESCALER 1 #define AO_RCC_CFGR_HPRE_DIV STM_RCC_CFGR_HPRE_DIV_1 /* Run APB1 at 16MHz (HCLK/2) */ #define AO_APB1_PRESCALER 2 #define AO_RCC_CFGR_PPRE1_DIV STM_RCC_CFGR_PPRE2_DIV_2 /* Run APB2 at 16MHz (HCLK/2) */ #define AO_APB2_PRESCALER 2 #define AO_RCC_CFGR_PPRE2_DIV STM_RCC_CFGR_PPRE2_DIV_2 #define HAS_EEPROM 1 #define USE_INTERNAL_FLASH 1 #define USE_EEPROM_CONFIG 1 #define USE_STORAGE_CONFIG 0 #define HAS_USB 1 #define HAS_BEEP 1 #define BEEPER_CHANNEL 4 #define HAS_RADIO 1 #define HAS_RADIO_RATE 1 #define HAS_TELEMETRY 0 #define HAS_AES 1 #define HAS_FIXED_PAD_BOX 1 #define HAS_SPI_1 0 #define SPI_1_PA5_PA6_PA7 0 #define SPI_1_PB3_PB4_PB5 0 #define SPI_1_PE13_PE14_PE15 0 #define HAS_SPI_2 1 /* CC1200 */ #define SPI_2_PB13_PB14_PB15 1 #define SPI_2_PD1_PD3_PD4 0 #define SPI_2_GPIO (&stm_gpiod) #define SPI_2_SCK 13 #define SPI_2_MISO 14 #define SPI_2_MOSI 15 #define SPI_2_OSPEEDR STM_OSPEEDR_10MHz #define HAS_I2C_1 0 #define HAS_I2C_2 0 #define PACKET_HAS_SLAVE 0 #define PACKET_HAS_MASTER 0 #define FAST_TIMER_FREQ 10000 /* .1ms for debouncing */ /* * Radio is a cc1200 connected via SPI */ #define AO_RADIO_CAL_DEFAULT 5695733 #define AO_FEC_DEBUG 0 #define AO_CC1200_SPI_CS_PORT (&stm_gpioa) #define AO_CC1200_SPI_CS_PIN 7 #define AO_CC1200_SPI_BUS AO_SPI_2_PB13_PB14_PB15 #define AO_CC1200_SPI stm_spi2 #define AO_CC1200_SPI_SPEED AO_SPI_SPEED_FAST #define AO_CC1200_INT_PORT (&stm_gpiob) #define AO_CC1200_INT_PIN (11) #define AO_CC1200_INT_GPIO 2 #define AO_CC1200_INT_GPIO_IOCFG CC1200_IOCFG2 #define LOW_LEVEL_DEBUG 0 #define LED_PORT_0 (&stm_gpioa) #define LED_PORT_1 (&stm_gpiob) #define LED_PORT_0_ENABLE STM_RCC_AHBENR_GPIOAEN #define LED_PORT_1_ENABLE STM_RCC_AHBENR_GPIOBEN /* Port A, pins 4-6 */ #define LED_PORT_0_SHIFT 4 #define LED_PORT_0_MASK 0x7 #define LED_PIN_GREEN 0 #define LED_PIN_AMBER 1 #define LED_PIN_RED 2 #define AO_LED_RED (1 << LED_PIN_RED) #define AO_LED_AMBER (1 << LED_PIN_AMBER) #define AO_LED_GREEN (1 << LED_PIN_GREEN) /* Port B, pins 3-5 */ #define LED_PORT_1_SHIFT 0 #define LED_PORT_1_MASK (0x7 << 3) #define LED_PIN_CONTINUITY_1 3 #define LED_PIN_CONTINUITY_0 4 #define LED_PIN_REMOTE_ARM 5 #define AO_LED_CONTINUITY_1 (1 << LED_PIN_CONTINUITY_1) #define AO_LED_CONTINUITY_0 (1 << LED_PIN_CONTINUITY_0) #define AO_LED_CONTINUITY_NUM 2 #define AO_LED_REMOTE_ARM (1 << LED_PIN_REMOTE_ARM) #define LEDS_AVAILABLE (AO_LED_RED | \ AO_LED_AMBER | \ AO_LED_GREEN | \ AO_LED_CONTINUITY_1 | \ AO_LED_CONTINUITY_0 | \ AO_LED_REMOTE_ARM) /* * Use event queue for input devices */ #define AO_EVENT 1 /* * Buttons */ #define AO_BUTTON_COUNT 3 #define AO_BUTTON_MODE AO_EXTI_MODE_PULL_UP #define AO_BUTTON_0_PORT &stm_gpioa #define AO_BUTTON_0 0 #define AO_BUTTON_BOX 0 #define AO_BUTTON_1_PORT &stm_gpioa #define AO_BUTTON_1 1 #define AO_BUTTON_ARM 1 #define AO_BUTTON_2_PORT &stm_gpioa #define AO_BUTTON_2 2 #define AO_BUTTON_FIRE 2 #endif /* _AO_PINS_H_ */