/* * Copyright © 2012 Keith Packard * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, but * WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * General Public License for more details. * * You should have received a copy of the GNU General Public License along * with this program; if not, write to the Free Software Foundation, Inc., * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. */ #ifndef _AO_PINS_H_ #define _AO_PINS_H_ /* 8MHz High speed external crystal */ #define AO_HSE 8000000 /* PLLVCO = 96MHz (so that USB will work) */ #define AO_PLLMUL 12 #define AO_RCC_CFGR_PLLMUL (STM_RCC_CFGR_PLLMUL_12) /* SYSCLK = 32MHz (no need to go faster than CPU) */ #define AO_PLLDIV 3 #define AO_RCC_CFGR_PLLDIV (STM_RCC_CFGR_PLLDIV_3) /* HCLK = 32MHz (CPU clock) */ #define AO_AHB_PRESCALER 1 #define AO_RCC_CFGR_HPRE_DIV STM_RCC_CFGR_HPRE_DIV_1 /* Run APB1 at 16MHz (HCLK/2) */ #define AO_APB1_PRESCALER 2 #define AO_RCC_CFGR_PPRE1_DIV STM_RCC_CFGR_PPRE2_DIV_2 /* Run APB2 at 16MHz (HCLK/2) */ #define AO_APB2_PRESCALER 2 #define AO_RCC_CFGR_PPRE2_DIV STM_RCC_CFGR_PPRE2_DIV_2 #define HAS_EEPROM 1 #define USE_INTERNAL_FLASH 1 #define HAS_USB 1 #define HAS_BEEP 1 #define HAS_RADIO 1 #define HAS_TELEMETRY 0 #define HAS_AES 1 #define HAS_SPI_1 0 #define SPI_1_PA5_PA6_PA7 0 #define SPI_1_PB3_PB4_PB5 0 #define SPI_1_PE13_PE14_PE15 0 #define HAS_SPI_2 1 /* CC1111 */ #define SPI_2_PB13_PB14_PB15 1 #define SPI_2_PD1_PD3_PD4 0 #define SPI_2_GPIO (&stm_gpiob) #define SPI_2_SCK 13 #define SPI_2_MISO 14 #define SPI_2_MOSI 15 #define SPI_2_OSPEEDR STM_OSPEEDR_10MHz #define HAS_I2C_1 0 #define HAS_I2C_2 0 #define PACKET_HAS_SLAVE 0 #define PACKET_HAS_MASTER 0 /* * Radio is a cc1111 connected via SPI */ #define AO_RADIO_CAL_DEFAULT 1186611 #define AO_RADIO_SPI_BUS AO_SPI_2_PB13_PB14_PB15 #define AO_RADIO_CS_PORT (&stm_gpiob) #define AO_RADIO_CS_PIN 12 #define AO_RADIO_INT_PORT (&stm_gpioc) #define AO_RADIO_INT_PIN 14 #define LOW_LEVEL_DEBUG 0 #define LED_PORT_ENABLE STM_RCC_AHBENR_GPIOCEN #define LED_PORT (&stm_gpioc) #define LED_PIN_RED 7 #define LED_PIN_GREEN 8 #define LED_PIN_CONTINUITY_3 9 #define LED_PIN_CONTINUITY_2 10 #define LED_PIN_CONTINUITY_1 11 #define LED_PIN_CONTINUITY_0 12 #define LED_PIN_REMOTE_ARM 13 #define AO_LED_RED (1 << LED_PIN_RED) #define AO_LED_GREEN (1 << LED_PIN_GREEN) #define AO_LED_CONTINUITY_3 (1 << LED_PIN_CONTINUITY_3) #define AO_LED_CONTINUITY_2 (1 << LED_PIN_CONTINUITY_2) #define AO_LED_CONTINUITY_1 (1 << LED_PIN_CONTINUITY_1) #define AO_LED_CONTINUITY_0 (1 << LED_PIN_CONTINUITY_0) #define AO_LED_CONTINUITY_NUM 4 #define AO_LED_REMOTE_ARM (1 << LED_PIN_REMOTE_ARM) #define LEDS_AVAILABLE (AO_LED_RED | \ AO_LED_GREEN | \ AO_LED_CONTINUITY_3 | \ AO_LED_CONTINUITY_2 | \ AO_LED_CONTINUITY_1 | \ AO_LED_CONTINUITY_0 | \ AO_LED_REMOTE_ARM) /* LCD displays */ #define AO_LCD_STM_SEG_ENABLED_0 ( \ (1 << 0) | /* PA1 */ \ (1 << 1) | /* PA2 */ \ (1 << 2) | /* PA3 */ \ (1 << 3) | /* PA6 */ \ (1 << 4) | /* PA7 */ \ (1 << 5) | /* PB0 */ \ (1 << 6) | /* PB1 */ \ (1 << 7) | /* PB3 */ \ (0 << 8) | /* PB4 */ \ (0 << 9) | /* PB5 */ \ (0 << 10) | /* PB10 */ \ (0 << 11) | /* PB11 */ \ (0 << 12) | /* PB12 */ \ (0 << 13) | /* PB13 */ \ (0 << 14) | /* PB14 */ \ (0 << 15) | /* PB15 */ \ (0 << 16) | /* PB8 */ \ (0 << 17) | /* PA15 */ \ (0 << 18) | /* PC0 */ \ (0 << 19) | /* PC1 */ \ (0 << 20) | /* PC2 */ \ (0 << 21) | /* PC3 */ \ (0 << 22) | /* PC4 */ \ (0 << 23) | /* PC5 */ \ (0 << 24) | /* PC6 */ \ (0 << 25) | /* PC7 */ \ (0 << 26) | /* PC8 */ \ (0 << 27) | /* PC9 */ \ (0 << 28) | /* PC10 or PD8 */ \ (0 << 29) | /* PC11 or PD9 */ \ (0 << 30) | /* PC12 or PD10 */ \ (0 << 31)) /* PD2 or PD11 */ #define AO_LCD_STM_SEG_ENABLED_1 ( \ (0 << 0) | /* PD12 */ \ (0 << 1) | /* PD13 */ \ (0 << 2) | /* PD14 */ \ (0 << 3) | /* PD15 */ \ (0 << 4) | /* PE0 */ \ (0 << 5) | /* PE1 */ \ (0 << 6) | /* PE2 */ \ (0 << 7)) /* PE3 */ #define AO_LCD_STM_COM_ENABLED ( \ (1 << 0) | /* PA8 */ \ (1 << 1) | /* PA9 */ \ (1 << 2) | /* PA10 */ \ (0 << 3) | /* PB9 */ \ (0 << 4) | /* PC10 */ \ (0 << 5) | /* PC11 */ \ (0 << 6)) /* PC12 */ #define AO_LCD_28_ON_C 0 #define AO_LCD_DUTY STM_LCD_CR_DUTY_1_4 #define AO_SEGMENT_0 0 #define AO_SEGMENT_1 5 #define AO_SEGMENT_2 1 #define AO_SEGMENT_3 6 #define AO_SEGMENT_4 4 #define AO_SEGMENT_5 2 #define AO_SEGMENT_6 3 #define AO_SEGMENT_7 7 /* * Use event queue for input devices */ #define AO_EVENT 1 /* * Knobs */ #define AO_QUADRATURE_COUNT 2 #define AO_QUADRATURE_MODE 0 #define AO_QUADRATURE_0_PORT &stm_gpioc #define AO_QUADRATURE_0_A 3 #define AO_QUADRATURE_0_B 2 #define AO_QUADRATURE_PAD 0 #define AO_QUADRATURE_1_PORT &stm_gpioc #define AO_QUADRATURE_1_A 1 #define AO_QUADRATURE_1_B 0 #define AO_QUADRATURE_BOX 1 /* * Buttons */ #define AO_BUTTON_COUNT 2 #define AO_BUTTON_MODE AO_EXTI_MODE_PULL_UP #define AO_BUTTON_0_PORT &stm_gpioc #define AO_BUTTON_0 4 #define AO_BUTTON_ARM 0 #define AO_BUTTON_1_PORT &stm_gpioc #define AO_BUTTON_1 5 #define AO_BUTTON_FIRE 1 #endif /* _AO_PINS_H_ */