/* * Copyright © 2012 Keith Packard * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, but * WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * General Public License for more details. * * You should have received a copy of the GNU General Public License along * with this program; if not, write to the Free Software Foundation, Inc., * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. */ #ifndef _AO_PINS_H_ #define _AO_PINS_H_ /* Bridge SB17 on the board and use the MCO from the other chip */ #define AO_HSE 8000000 #define AO_HSE_BYPASS 1 /* PLLVCO = 96MHz (so that USB will work) */ #define AO_PLLMUL 12 #define AO_RCC_CFGR_PLLMUL (STM_RCC_CFGR_PLLMUL_12) /* SYSCLK = 32MHz */ #define AO_PLLDIV 3 #define AO_RCC_CFGR_PLLDIV (STM_RCC_CFGR_PLLDIV_3) /* HCLK = 32MHZ (CPU clock) */ #define AO_AHB_PRESCALER 1 #define AO_RCC_CFGR_HPRE_DIV STM_RCC_CFGR_HPRE_DIV_1 /* Run APB1 at HCLK/1 */ #define AO_APB1_PRESCALER 1 #define AO_RCC_CFGR_PPRE1_DIV STM_RCC_CFGR_PPRE2_DIV_1 /* Run APB2 at HCLK/1 */ #define AO_APB2_PRESCALER 1 #define AO_RCC_CFGR_PPRE2_DIV STM_RCC_CFGR_PPRE2_DIV_1 #define HAS_SERIAL_1 0 #define USE_SERIAL_1_STDIN 0 #define SERIAL_1_PB6_PB7 1 #define SERIAL_1_PA9_PA10 0 #define HAS_SERIAL_2 0 #define USE_SERIAL_2_STDIN 0 #define SERIAL_2_PA2_PA3 0 #define SERIAL_2_PD5_PD6 1 #define HAS_SERIAL_3 0 #define USE_SERIAL_3_STDIN 1 #define SERIAL_3_PB10_PB11 0 #define SERIAL_3_PC10_PC11 0 #define SERIAL_3_PD8_PD9 1 #define HAS_SPI_1 0 #define SPI_1_PB3_PB4_PB5 1 #define SPI_1_OSPEEDR STM_OSPEEDR_10MHz #define HAS_SPI_2 0 #define HAS_USB 1 #define HAS_BEEP 0 #define PACKET_HAS_SLAVE 0 #define AO_BOOT_CHAIN 1 #define LOW_LEVEL_DEBUG 0 #define LED_PORT_ENABLE STM_RCC_AHBENR_GPIOBEN #define LED_PORT (&stm_gpiob) #define LED_PIN_GREEN 7 #define LED_PIN_BLUE 6 #define AO_LED_GREEN (1 << LED_PIN_GREEN) #define AO_LED_BLUE (1 << LED_PIN_BLUE) #define AO_LED_PANIC AO_LED_BLUE #define LEDS_AVAILABLE (AO_LED_BLUE | AO_LED_GREEN) #define HAS_ADC 0 #define AO_TICK_TYPE uint32_t #define AO_TICK_SIGNED int32_t #endif /* _AO_PINS_H_ */