From 35a05041d3ca3e69a146bd3bf8038c0f1cbc1b42 Mon Sep 17 00:00:00 2001 From: Keith Packard Date: Sun, 19 May 2013 20:04:29 -0700 Subject: altos: Add EXTI_PIN_NOCONFIGURE to exti interface, use for MS5607 This asks the EXTI code to not mess with the pin configuration so that the MS5607 driver can get interrupts on the MISO pin while still using it for SPI. Signed-off-by: Keith Packard --- src/stm/ao_exti.h | 1 + src/stm/ao_exti_stm.c | 30 ++++++++++++++++-------------- 2 files changed, 17 insertions(+), 14 deletions(-) (limited to 'src/stm') diff --git a/src/stm/ao_exti.h b/src/stm/ao_exti.h index 35b56b57..ebea224d 100644 --- a/src/stm/ao_exti.h +++ b/src/stm/ao_exti.h @@ -25,6 +25,7 @@ #define AO_EXTI_PRIORITY_LOW 16 #define AO_EXTI_PRIORITY_MED 0 #define AO_EXTI_PRIORITY_HIGH 32 +#define AO_EXTI_PIN_NOCONFIGURE 64 void ao_exti_setup(struct stm_gpio *gpio, uint8_t pin, uint8_t mode, void (*callback)()); diff --git a/src/stm/ao_exti_stm.c b/src/stm/ao_exti_stm.c index 1361d0d4..c1dcdf85 100644 --- a/src/stm/ao_exti_stm.c +++ b/src/stm/ao_exti_stm.c @@ -70,21 +70,23 @@ ao_exti_setup (struct stm_gpio *gpio, uint8_t pin, uint8_t mode, void (*callback /* configure gpio to interrupt routing */ stm_exticr_set(gpio, pin); - /* configure pin as input, setting selected pull-up/down mode */ - stm_moder_set(gpio, pin, STM_MODER_INPUT); - switch (mode & (AO_EXTI_MODE_PULL_UP|AO_EXTI_MODE_PULL_DOWN)) { - case 0: - default: - pupdr = STM_PUPDR_NONE; - break; - case AO_EXTI_MODE_PULL_UP: - pupdr = STM_PUPDR_PULL_UP; - break; - case AO_EXTI_MODE_PULL_DOWN: - pupdr = STM_PUPDR_PULL_DOWN; - break; + if (!(mode & AO_EXTI_PIN_NOCONFIGURE)) { + /* configure pin as input, setting selected pull-up/down mode */ + stm_moder_set(gpio, pin, STM_MODER_INPUT); + switch (mode & (AO_EXTI_MODE_PULL_UP|AO_EXTI_MODE_PULL_DOWN)) { + case 0: + default: + pupdr = STM_PUPDR_NONE; + break; + case AO_EXTI_MODE_PULL_UP: + pupdr = STM_PUPDR_PULL_UP; + break; + case AO_EXTI_MODE_PULL_DOWN: + pupdr = STM_PUPDR_PULL_DOWN; + break; + } + stm_pupdr_set(gpio, pin, pupdr); } - stm_pupdr_set(gpio, pin, pupdr); /* Set interrupt mask and rising/falling mode */ stm_exti.imr &= ~mask; -- cgit v1.2.3