From ce297f14ff54d230d01fb6dedaafca571e8b836b Mon Sep 17 00:00:00 2001 From: Keith Packard Date: Sat, 31 Oct 2015 21:34:42 -0700 Subject: doc: Finish converting docs to asciidoc format Signed-off-by: Keith Packard --- doc/updating-firmware.inc | 21 +++++++++++---------- 1 file changed, 11 insertions(+), 10 deletions(-) (limited to 'doc/updating-firmware.inc') diff --git a/doc/updating-firmware.inc b/doc/updating-firmware.inc index 8b29558c..d22fdb18 100644 --- a/doc/updating-firmware.inc +++ b/doc/updating-firmware.inc @@ -17,18 +17,12 @@ download the most recent version from http://www.altusmetrum.org/AltOS/ - If you need to update the firmware on a TeleDongle v0.2, we - recommend updating the altimeter first, before updating - TeleDongle. However, note that TeleDongle rarely need to be - updated. Any firmware version 1.0.1 or later will work, - version 1.2.1 may have improved receiver performance slightly. - - Self-programmable devices (TeleMega, TeleMetrum v2, EasyMega - and EasyMini) are reprogrammed by connecting them to your - computer over USB - === Updating TeleMega, TeleMetrum v2, EasyMega, EasyMini or TeleDongle v3 Firmware + Self-programmable devices (TeleMega, TeleMetrum v2, + EasyMega and EasyMini) are reprogrammed by connecting + them to your computer over USB + . Attach a battery if necessary and power switch to the target device. Power up the device. @@ -144,6 +138,13 @@ support programming directly over USB for these devices. + If you need to update the firmware on a TeleDongle + v0.2, we recommend updating the altimeter first, + before updating TeleDongle. However, note that + TeleDongle rarely need to be updated. Any firmware + version 1.0.1 or later will work, version 1.2.1 may + have improved receiver performance slightly. + ==== Updating TeleMetrum v1.x Firmware . Find the 'programming cable' that you got as -- cgit v1.2.3