From 7acd0cf17c5ca7a00893f35c7fe9c657389070e0 Mon Sep 17 00:00:00 2001 From: Keith Packard Date: Tue, 17 Dec 2013 10:33:29 -0800 Subject: doc: Convert several more itemizedlists to variablelists When defining a term, use variablelist to pull the term out to the left. Signed-off-by: Keith Packard --- doc/altusmetrum.xsl | 220 ++++++++++++++++++++++++++++++---------------------- 1 file changed, 128 insertions(+), 92 deletions(-) diff --git a/doc/altusmetrum.xsl b/doc/altusmetrum.xsl index 0430bc94..3022b8e3 100644 --- a/doc/altusmetrum.xsl +++ b/doc/altusmetrum.xsl @@ -1793,35 +1793,47 @@ NAR #88757, TRA #12200 At the bottom of the dialog, there are four buttons: - - - - Save. This writes any changes to the - configuration parameter block in flash memory. If you don't - press this button, any changes you make will be lost. - - - - - Reset. This resets the dialog to the most recently saved values, - erasing any changes you have made. - - - - - Reboot. This reboots the device. Use this to - switch from idle to pad mode by rebooting once the rocket is - oriented for flight, or to confirm changes you think you saved - are really saved. - - - - - Close. This closes the dialog. Any unsaved changes will be - lost. - - - + + + Save + + + This writes any changes to the + configuration parameter block in flash memory. If you don't + press this button, any changes you make will be lost. + + + + + Reset + + + This resets the dialog to the most recently saved values, + erasing any changes you have made. + + + + + Reboot + + + This reboots the device. Use this to + switch from idle to pad mode by rebooting once the rocket is + oriented for flight, or to confirm changes you think you saved + are really saved. + + + + + Close + + + This closes the dialog. Any unsaved changes will be + lost. + + + + The rest of the dialog contains the parameters to be configured. @@ -1913,32 +1925,41 @@ NAR #88757, TRA #12200 computers. This configuration parameter allows the two channels to be used in different configurations. - - - - Dual Deploy. This is the usual mode of operation; the - 'apogee' channel is fired at apogee and the 'main' - channel at the height above ground specified by the - 'Main Deploy Altitude' during descent. - - - - - Redundant Apogee. This fires both channels at - apogee, the 'apogee' channel first followed after a two second - delay by the 'main' channel. - - - - - Redundant Main. This fires both channels at the - height above ground specified by the Main Deploy - Altitude setting during descent. The 'apogee' - channel is fired first, followed after a two second - delay by the 'main' channel. - - - + + + Dual Deploy + + + This is the usual mode of operation; the + 'apogee' channel is fired at apogee and the 'main' + channel at the height above ground specified by the + 'Main Deploy Altitude' during descent. + + + + + Redundant Apogee + + + This fires both channels at + apogee, the 'apogee' channel first followed after a two second + delay by the 'main' channel. + + + + + Redundant Main + + + This fires both channels at the + height above ground specified by the Main Deploy + Altitude setting during descent. The 'apogee' + channel is fired first, followed after a two second + delay by the 'main' channel. + + + +
Pad Orientation @@ -1949,22 +1970,28 @@ NAR #88757, TRA #12200 parameter allows that default to be changed, permitting the board to be mounted with the antenna pointing aft instead. - - - - Antenna Up. In this mode, the antenna end of the - TeleMetrum board must point forward, in line with the - expected flight path. - - - - - Antenna Down. In this mode, the antenna end of the - TeleMetrum board must point aft, in line with the - expected flight path. - - - + + + Antenna Up + + + In this mode, the antenna end of the + TeleMetrum board must point forward, in line with the + expected flight path. + + + + + Antenna Down + + + In this mode, the antenna end of the + TeleMetrum board must point aft, in line with the + expected flight path. + + + +
Configure Pyro Channels @@ -2111,27 +2138,36 @@ NAR #88757, TRA #12200 At the bottom of the dialog, there are three buttons: - - - - Save. This writes any changes to the - local Java preferences file. If you don't - press this button, any changes you make will be lost. - - - - - Reset. This resets the dialog to the most recently saved values, - erasing any changes you have made. - - - - - Close. This closes the dialog. Any unsaved changes will be - lost. - - - + + + Save + + + This writes any changes to the + local Java preferences file. If you don't + press this button, any changes you make will be lost. + + + + + Reset + + + This resets the dialog to the most recently saved values, + erasing any changes you have made. + + + + + Close + + + This closes the dialog. Any unsaved changes will be + lost. + + + + The rest of the dialog contains the parameters to be configured. -- cgit v1.2.3 From 9d8da4ef325171960e16fc027c6039cb63eae942 Mon Sep 17 00:00:00 2001 From: Keith Packard Date: Tue, 17 Dec 2013 11:19:54 -0800 Subject: Keep tables together on a page --- doc/altusmetrum.xsl | 3 +++ doc/xorg-fo.xsl | 3 +-- 2 files changed, 4 insertions(+), 2 deletions(-) diff --git a/doc/altusmetrum.xsl b/doc/altusmetrum.xsl index 3022b8e3..659ea2f9 100644 --- a/doc/altusmetrum.xsl +++ b/doc/altusmetrum.xsl @@ -329,6 +329,7 @@ NAR #88757, TRA #12200 Altus Metrum Electronics + @@ -436,6 +437,7 @@ NAR #88757, TRA #12200
Altus Metrum Boards + @@ -612,6 +614,7 @@ NAR #88757, TRA #12200
Data Storage on Altus Metrum altimeters + diff --git a/doc/xorg-fo.xsl b/doc/xorg-fo.xsl index a02ad1ea..075a2d98 100644 --- a/doc/xorg-fo.xsl +++ b/doc/xorg-fo.xsl @@ -17,7 +17,7 @@ - + @@ -98,7 +98,6 @@ DejaVu Serif serif,Symbol,AR PL UMing CN,AR PL ShanHeiSun Uni,GNU Unifont - -- cgit v1.2.3 From dffbdd93d7a86a12d83a412de37dfd2a5f063995 Mon Sep 17 00:00:00 2001 From: Keith Packard Date: Tue, 17 Dec 2013 11:38:46 -0800 Subject: doc: Add product pictures to manual Signed-off-by: Keith Packard --- doc/altusmetrum.xsl | 25 +++++++++++++++++++++++++ doc/easymini-top.jpg | Bin 0 -> 680720 bytes doc/telemega-v1.0-top.jpg | Bin 0 -> 3212941 bytes doc/telemetrum-v1.1-thside.jpg | Bin 0 -> 1619135 bytes doc/telemini-v1-top.jpg | Bin 0 -> 1006003 bytes doc/telemini-v2-top.jpg | Bin 0 -> 579692 bytes 6 files changed, 25 insertions(+) create mode 100644 doc/easymini-top.jpg create mode 100644 doc/telemega-v1.0-top.jpg create mode 100644 doc/telemetrum-v1.1-thside.jpg create mode 100644 doc/telemini-v1-top.jpg create mode 100644 doc/telemini-v2-top.jpg diff --git a/doc/altusmetrum.xsl b/doc/altusmetrum.xsl index 659ea2f9..61451f41 100644 --- a/doc/altusmetrum.xsl +++ b/doc/altusmetrum.xsl @@ -546,6 +546,11 @@ NAR #88757, TRA #12200
TeleMetrum + + + + + TeleMetrum is a 1 inch by 2¾ inch circuit board. It was designed to fit inside coupler for 29mm air-frame tubing, but using it in a tube that @@ -561,6 +566,11 @@ NAR #88757, TRA #12200
TeleMini + + + + + TeleMini v1.0 is ½ inches by 1½ inches. It was designed to fit inside an 18mm air-frame tube, but using it in @@ -575,6 +585,11 @@ NAR #88757, TRA #12200 the board, meaning an ideal “simple” avionics bay for TeleMini should have at least 9 inches of interior length. + + + + + TeleMini v2.0 is 0.8 inches by 1½ inches. It adds more on-board data logging memory, a built-in USB connector and @@ -585,6 +600,11 @@ NAR #88757, TRA #12200
EasyMini + + + + + EasyMini is built on a 0.8 inch by 1½ inch circuit board. It's designed to fit in a 24mm coupler tube. The connectors and @@ -594,6 +614,11 @@ NAR #88757, TRA #12200
TeleMega + + + + + TeleMega is a 1¼ inch by 3¼ inch circuit board. It was designed to easily fit in a 38mm coupler. Like TeleMetrum, diff --git a/doc/easymini-top.jpg b/doc/easymini-top.jpg new file mode 100644 index 00000000..2b9e0a37 Binary files /dev/null and b/doc/easymini-top.jpg differ diff --git a/doc/telemega-v1.0-top.jpg b/doc/telemega-v1.0-top.jpg new file mode 100644 index 00000000..709d59f1 Binary files /dev/null and b/doc/telemega-v1.0-top.jpg differ diff --git a/doc/telemetrum-v1.1-thside.jpg b/doc/telemetrum-v1.1-thside.jpg new file mode 100644 index 00000000..2ffbdbd8 Binary files /dev/null and b/doc/telemetrum-v1.1-thside.jpg differ diff --git a/doc/telemini-v1-top.jpg b/doc/telemini-v1-top.jpg new file mode 100644 index 00000000..f79714c4 Binary files /dev/null and b/doc/telemini-v1-top.jpg differ diff --git a/doc/telemini-v2-top.jpg b/doc/telemini-v2-top.jpg new file mode 100644 index 00000000..bc8ae45b Binary files /dev/null and b/doc/telemini-v2-top.jpg differ -- cgit v1.2.3