summaryrefslogtreecommitdiff
path: root/src
Commit message (Collapse)AuthorAge
* altos/telegps-v2.0: Adjust LED configKeith Packard2017-04-30
| | | | | | The LED is green, not red. Use it for panic and GPS lock. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos/kernel: Allow TeleGPS v2 to scale battery in telemKeith Packard2017-04-30
| | | | | | | | | TeleGPS v2 uses the STMF0 processor instead of the LPC11, which means the ADC range is different. As the raw ADC value was getting sent to represent battery voltage in the config packet, we need to scale that for the different processor. This patch allows that to happen. Signed-off-by: Keith Packard <keithp@keithp.com>
* src/kernel: Add GPS lock blink LED to tracker codeKeith Packard2017-04-30
| | | | | | Blinks an LED briefly once every three seconds when GPS is locked. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Build MicroPeak-v2.0 by defaultKeith Packard2017-04-28
| | | | Signed-off-by: Keith Packard <keithp@keithp.com>
* altos/micropeak-v2.0: Add initial MicroPeak v2 supportKeith Packard2017-04-28
| | | | | | | stm32f042 processor replaces the attiny85 and adds USB support along with more storage. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos/stmf0: Add support for HSI clocked applicationsKeith Packard2017-04-28
| | | | | | And allow application space to be limited to less than available flash. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos/stmf0: Fix HSI clock rate.Keith Packard2017-04-28
| | | | | | It's 8MHz, not 16MHz Signed-off-by: Keith Packard <keithp@keithp.com>
* altos/stmf0: Make sure systick is off before programmingKeith Packard2017-04-28
| | | | Signed-off-by: Keith Packard <keithp@keithp.com>
* altos/stmf0: Compute serial baud rate registers at runtimeKeith Packard2017-04-28
| | | | | | | This allows the system clock to vary at runtime, instead of requiring a fixed value. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos/micropeak: Update ao_micropeak.h for MicroPeak v2Keith Packard2017-04-28
| | | | | | Allow different sample times, add constant for MicroPeak v2 log files. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos/micropeak: Use existing ao_ms5607_current variableKeith Packard2017-04-28
| | | | | | Instead of defining another. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Add header file for ao_report_micro.cKeith Packard2017-04-28
| | | | | | Defines the functions in this file. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Add 100ms constants for baro Kalman filterKeith Packard2017-04-27
| | | | | | MicroPeak v2 uses this rate. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Adapt micro log to MicroPeak V3Keith Packard2017-04-27
| | | | | | | Allow use of regular serial API for sending data. Allow application to specify different storage size. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos/ms5607: Allow applications to not use the normal data ring and threadKeith Packard2017-04-27
| | | | | | | MicroPeak V2 has tasks, but doesn't want to use another thread just for the MS5607. Signed-off-by: Keith Packard <keithp@keithp.com>
* telemini-v3.0: make git ignore build productsBdale Garbee2017-04-25
|
* telebt-v4.0: make git ignore products of buildBdale Garbee2017-04-25
|
* telegps-v2.0: slow down radio chip spi speedBdale Garbee2017-04-25
|
* telebt-v4.0: slow down SPI speed to radio chipBdale Garbee2017-04-25
|
* telebt-v4.0: turn off pin remapping in the flash loader, tooBdale Garbee2017-04-25
|
* telebt-v4.0: don't need the USB pin remapping flagBdale Garbee2017-04-25
|
* telebt-v4.0: add ao_send_packetBdale Garbee2017-04-25
|
* Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altosBdale Garbee2017-04-25
|\
| * altos/nucleo-32: Add lisp save/restoreKeith Packard2017-04-24
| | | | | | | | Signed-off-by: Keith Packard <keithp@keithp.com>
| * altos/telegps-v2.0: git ignore make resultsKeith Packard2017-04-24
| | | | | | | | Signed-off-by: Keith Packard <keithp@keithp.com>
| * Ignore ao_lisp_testKeith Packard2017-04-24
| |
| * altos: Add telemini-v3.0 and easymini-v2.0 to default altos buildKeith Packard2017-04-24
| | | | | | | | | | | | Make sure they get built for releases Signed-off-by: Keith Packard <keithp@keithp.com>
| * altos/easymini-v2.0: Add EasyMini v2.0Keith Packard2017-04-24
| | | | | | | | | | | | Like EasyMini v1.0, but with the STM32F0 processor instead of LPC Signed-off-by: Keith Packard <keithp@keithp.com>
| * altos/telemini-v3.0: Fix licenseKeith Packard2017-04-24
| | | | | | | | | | | | Was GPL2, switch to GPL2+ Signed-off-by: Keith Packard <keithp@keithp.com>
| * altos/stmf0: Not all timer configurations use AF2Keith Packard2017-04-24
| | | | | | | | | | | | Allow applications to select other configurations. Signed-off-by: Keith Packard <keithp@keithp.com>
* | telebt-v4.0: initial creation of firmware for new product, no BT yetBdale Garbee2017-04-25
|/
* altos/ao_pad.c: Use #if HAS_LOG instead of #ifdef HAS_LOGKeith Packard2017-04-24
| | | | | | TeleFire v0.1 defines HAS_LOG to 0. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Move old AO_LAUNCH defines to cc1111/ao_launch.hKeith Packard2017-04-22
| | | | | | These were getting accidentally used by ao_pad.c Signed-off-by: Keith Packard <keithp@keithp.com>
* allow multiple tests to be logged on telefiretwo without rebootingBdale Garbee2017-04-23
|
* implement static test start and stop protocol for telefiretwo+telebtBdale Garbee2017-04-22
|
* eliminate spurious close bracesBdale Garbee2017-04-22
|
* add static test start and stop commands to radio protocol for telefiretwoBdale Garbee2017-04-22
|
* enable logging support in telefiretwoBdale Garbee2017-04-22
|
* cobble up a command to toggle logging on/off on TeleFireTwoBdale Garbee2017-04-22
|
* a stab at turning on rudimentary logging for telefiretwoBdale Garbee2017-04-22
|
* fleshing out logging for telefiretwoBdale Garbee2017-04-22
|
* enable spi flash on telefiretwoBdale Garbee2017-04-22
|
* fix TeleFireTwo product name in ao-list outputBdale Garbee2017-04-22
|
* altos/stmf0: Pull beeper pin low when beeper is offKeith Packard2017-04-21
| | | | | | | This avoids having the pin float and pick up noise from any adjacent signals, like TeleMini's radio. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos/lpc: Really fix aes entry in lpc vpathKeith Packard2017-04-21
| | | | | | I added another entry instead of fixing the existing one. Not ideal. Signed-off-by: Keith Packard <keithp@keithp.com>
* alots/stmf0: Fix vpath entry for AES directoryKeith Packard2017-04-21
| | | | | | Mis-placed ) Signed-off-by: Keith Packard <keithp@keithp.com>
* altos/lpc,altos/stmf0: Use -n flag to work around link editor issueKeith Packard2017-04-21
| | | | | | | | | Something changed in the link editor which makes it complain about 'no space for program headers' on LPC and STMF0 builds. Somehow, adding the '-n' flag to the linking step fixes it. It doesn't appear to break the build, so I guess it's ok? Signed-off-by: Keith Packard <keithp@keithp.com>
* altos/telemini-v3.0: Remove vestiges of the pre-USB codeKeith Packard2017-04-21
| | | | | | | | | Pre-USB telemini v3 designs had a separate firmware load for radio calibration. Now that we've got enough USB to perform flash/cal/test, we don't need that other firmware load, so we can remove the remaining Makefile remnants of the calibration load. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos/lpc: Add (void *) cast to fix alignment warningKeith Packard2017-04-21
| | | | | | The -Wcast-align warning is generated when this cast is not present. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos/lpc: Fix up Makefile definitionsKeith Packard2017-04-21
| | | | | | | | vpath reference to aes was busted. WARN_CFLAGS needs -Wcast-align. Wrap AO_CFLAGS. Signed-off-by: Keith Packard <keithp@keithp.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-10-19 14:47:27 +0000