summaryrefslogtreecommitdiff
path: root/src
Commit message (Expand)AuthorAge
* altos/stmf0: Initialize UART RTS/CTS before turning it onKeith Packard2017-06-27
* altos/rn4678: Add BLE supportKeith Packard2017-06-20
* altos/telebt-4.0: Add dependency on RN4678 headerKeith Packard2017-06-13
* altos: Add timeout to RN4678 status message codeKeith Packard2017-06-13
* altos: Create separate log format for EasyMini v2.0Keith Packard2017-06-11
* altos: HMC5883 output order is X Z YKeith Packard2017-06-11
* altos: Update sensor data atomicallyKeith Packard2017-06-11
* altos/telebt-v3.0: Add send_packet commandKeith Packard2017-05-19
* altos/telebt-v4.0: Remove HAS_POLLCHARKeith Packard2017-05-19
* altos/telefireone-v1.0: Fix confusing defines about config storageKeith Packard2017-05-19
* re-brand current telefiretwo product as telefireoneBdale Garbee2017-05-15
* altos/ao_rn4678: Send '$$$' for new devices. Fix name setting code.Keith Packard2017-05-15
* altos/stmf: Fix up serial port flow control configuration bitsKeith Packard2017-05-15
* altos/telebt-v4.0: Hook up RN4678 moduleKeith Packard2017-05-13
* altos: Add RN4678 Bluetooth module driverKeith Packard2017-05-13
* telefiretwo: don't try to record pre-burn sensor values in FLIGHT recordBdale Garbee2017-05-11
* altos/telemini-v3.0: Use dbg connector pin 5 for force bootloaderKeith Packard2017-05-04
* altos/telemini-v3.0: Add 'recovery mode' on PA14 (pin 6 on dbg header)Keith Packard2017-05-04
* altos: Move 'ao_force_freq' to ao_config.cKeith Packard2017-05-04
* altos: Make CDC ACM 'line coding' publicKeith Packard2017-05-04
* altos/telebt-v4.0 Set CPU clock to 48Mhz instead of 96MhzBdale Garbee2017-05-03
* altos/telegps-v2.0: Disable external serial port to save ROMKeith Packard2017-05-02
* altos/stmf0: Add code to use SoC flash as storageKeith Packard2017-05-02
* altos/telegps-v2.0: Reorder initialization sequenceKeith Packard2017-04-30
* altos/telegps-v2.0: CC1200 CS is PA1, not PA5.Keith Packard2017-04-30
* altos/telegps-v2.0: GPS chip is connected to serial 2, not serial 1Keith Packard2017-04-30
* altos/telegps-v2.0: Remove some unneeded definesKeith Packard2017-04-30
* altos/telegps-v2.0: Battery ADC input is on PB1, not PA0Keith Packard2017-04-30
* altos/telegps-v2.0: Set CPU clock to 48MHz instread of 96MHzKeith Packard2017-04-30
* altos/telegps-v2.0: Adjust LED configKeith Packard2017-04-30
* altos/kernel: Allow TeleGPS v2 to scale battery in telemKeith Packard2017-04-30
* src/kernel: Add GPS lock blink LED to tracker codeKeith Packard2017-04-30
* altos: Build MicroPeak-v2.0 by defaultKeith Packard2017-04-28
* altos/micropeak-v2.0: Add initial MicroPeak v2 supportKeith Packard2017-04-28
* altos/stmf0: Add support for HSI clocked applicationsKeith Packard2017-04-28
* altos/stmf0: Fix HSI clock rate.Keith Packard2017-04-28
* altos/stmf0: Make sure systick is off before programmingKeith Packard2017-04-28
* altos/stmf0: Compute serial baud rate registers at runtimeKeith Packard2017-04-28
* altos/micropeak: Update ao_micropeak.h for MicroPeak v2Keith Packard2017-04-28
* altos/micropeak: Use existing ao_ms5607_current variableKeith Packard2017-04-28
* altos: Add header file for ao_report_micro.cKeith Packard2017-04-28
* altos: Add 100ms constants for baro Kalman filterKeith Packard2017-04-27
* altos: Adapt micro log to MicroPeak V3Keith Packard2017-04-27
* altos/ms5607: Allow applications to not use the normal data ring and threadKeith Packard2017-04-27
* telemini-v3.0: make git ignore build productsBdale Garbee2017-04-25
* telebt-v4.0: make git ignore products of buildBdale Garbee2017-04-25
* telegps-v2.0: slow down radio chip spi speedBdale Garbee2017-04-25
* telebt-v4.0: slow down SPI speed to radio chipBdale Garbee2017-04-25
* telebt-v4.0: turn off pin remapping in the flash loader, tooBdale Garbee2017-04-25
* telebt-v4.0: don't need the USB pin remapping flagBdale Garbee2017-04-25
generated by cgit v1.2.3 (git 2.39.1) at 2025-10-15 17:54:20 +0000