summaryrefslogtreecommitdiff
path: root/src
Commit message (Expand)AuthorAge
* Set version to 1.5.9.11.5.9.1Keith Packard2015-01-16
* altos/lpc: Switch LPC SPI driver to interrupt-drivenbdale-altosdroidKeith Packard2014-12-22
* altos: Adjust CC1200 RSSI reporting valueKeith Packard2014-12-22
* altos: Document cc115l power measured at RF setting 0x03 as -31.75dBmKeith Packard2014-12-22
* altos/cc1200: With PQT wide open, we can't use PQT_REACHED for startKeith Packard2014-11-23
* altos/cc1200: Open up preamble detect to improve sensitivityKeith Packard2014-11-23
* altos/cc1200: Wait for packet to be placed in FIFO during receiveKeith Packard2014-11-23
* altos/teledongle-v1.8: Make this the same as teledongle v1.9Keith Packard2014-11-16
* altos: Allow TeleMega to be built without MPU6000Keith Packard2014-11-16
* altos/microsplash: fix .gitignore to ignore resulting binaryKeith Packard2014-11-16
* altos: Reset interrupt flags before TX in CC1200 driverKeith Packard2014-11-06
* altos/teledongle-v1.9: Switch to NXP processor as on prototype boardsKeith Packard2014-11-06
* altos/lpc: Disable JTAG when using pins for GPIOKeith Packard2014-11-06
* altos/lpc: Declare SPI send parameters as constKeith Packard2014-11-06
* altos: Use other TeleDongle LED for CRC-invalid packet reportingKeith Packard2014-11-06
* altos: Use AO_SPO_SPEED_FAST for CC1200Keith Packard2014-11-06
* altos: Stop attempting to ramp power on CC115LKeith Packard2014-11-06
* altos: Declare port register type only in arch headerKeith Packard2014-11-06
* Move teledongle 1.9 to 1.8; there's a new 1.9Keith Packard2014-11-06
* altos: Rename microwater to microsplashKeith Packard2014-11-05
* altos: Increase CC1200 SPI data rate to 8MHzKeith Packard2014-10-25
* altos: Fix up telemetry delay computationsKeith Packard2014-10-25
* altos: Perform cc1200 calibration less often. Tweak radio paramsKeith Packard2014-10-25
* altos: Remove old AO_SEND_ALL_BARO bitsKeith Packard2014-10-25
* altos: Build TeleDongle v1.9 by defaultKeith Packard2014-10-25
* altos: Increase PQT value for cc1200 improving sensitivityKeith Packard2014-10-25
* altos: Sort out ao_gps_print altitude fetchingKeith Packard2014-10-25
* altos/teledongle-v1.9: Add remaining code to complete the projectKeith Packard2014-10-24
* altos: Complete cc1200 driverKeith Packard2014-10-24
* altos: Expose telemetry altitude macros even without GPSKeith Packard2014-10-24
* altos: Mark STM ao_spi_send as taking const pointerKeith Packard2014-10-24
* altos: Add prototype TeleDongle v1.9 codeKeith Packard2014-10-05
* altos: Copy cc1120 driver to cc1200 driver and hack a bitKeith Packard2014-10-05
* altos: Fix syntax error with ao_log_mega change.Keith Packard2014-10-04
* altos: Record 32-bits for gyro calibration valuesKeith Packard2014-10-04
* altos: Handle antenna down in ao_flight_testKeith Packard2014-09-29
* altos: Make sure we drop the SPI mutex when aborting cc1120 recvKeith Packard2014-09-26
* altos: Make sure we don't beep out continuity twice in idle modeKeith Packard2014-09-11
* altos: Add smaller altitude table file to .gitignoreKeith Packard2014-09-11
* altos/test: Add TMv2 test program to .gitignoreKeith Packard2014-09-11
* altos: Fix ability to disable telemetry by setting interval to 0Keith Packard2014-09-11
* altos/easymega: Set USB PID for EasyMega to 0x0028Keith Packard2014-09-09
* altos: Scale packet master receive delay by baud rateKeith Packard2014-09-06
* altos: Reduce deviation at 2400/9600 baudKeith Packard2014-09-06
* altos: Allow negative values for pyro configuration dataKeith Packard2014-09-03
* altos/telefire: Add firing length to manual pad commandKeith Packard2014-09-03
* altos: Don't add AO_LOG_FLIGHT to existing GPS logsKeith Packard2014-09-01
* altos: Make sure pyro remains valid during delayKeith Packard2014-08-29
* altos: Add telerepeat-v1.0Keith Packard2014-08-17
* telegps-v1.0: Provide one log and append to itKeith Packard2014-08-17
generated by cgit v1.2.3 (git 2.39.1) at 2025-10-15 17:28:06 +0000