summaryrefslogtreecommitdiff
path: root/src
Commit message (Expand)AuthorAge
...
* altos/stmf0: Add code to use SoC flash as storageKeith Packard2017-05-02
* altos/telegps-v2.0: Reorder initialization sequenceKeith Packard2017-04-30
* altos/telegps-v2.0: CC1200 CS is PA1, not PA5.Keith Packard2017-04-30
* altos/telegps-v2.0: GPS chip is connected to serial 2, not serial 1Keith Packard2017-04-30
* altos/telegps-v2.0: Remove some unneeded definesKeith Packard2017-04-30
* altos/telegps-v2.0: Battery ADC input is on PB1, not PA0Keith Packard2017-04-30
* altos/telegps-v2.0: Set CPU clock to 48MHz instread of 96MHzKeith Packard2017-04-30
* altos/telegps-v2.0: Adjust LED configKeith Packard2017-04-30
* altos/kernel: Allow TeleGPS v2 to scale battery in telemKeith Packard2017-04-30
* src/kernel: Add GPS lock blink LED to tracker codeKeith Packard2017-04-30
* altos: Build MicroPeak-v2.0 by defaultKeith Packard2017-04-28
* altos/micropeak-v2.0: Add initial MicroPeak v2 supportKeith Packard2017-04-28
* altos/stmf0: Add support for HSI clocked applicationsKeith Packard2017-04-28
* altos/stmf0: Fix HSI clock rate.Keith Packard2017-04-28
* altos/stmf0: Make sure systick is off before programmingKeith Packard2017-04-28
* altos/stmf0: Compute serial baud rate registers at runtimeKeith Packard2017-04-28
* altos/micropeak: Update ao_micropeak.h for MicroPeak v2Keith Packard2017-04-28
* altos/micropeak: Use existing ao_ms5607_current variableKeith Packard2017-04-28
* altos: Add header file for ao_report_micro.cKeith Packard2017-04-28
* altos: Add 100ms constants for baro Kalman filterKeith Packard2017-04-27
* altos: Adapt micro log to MicroPeak V3Keith Packard2017-04-27
* altos/ms5607: Allow applications to not use the normal data ring and threadKeith Packard2017-04-27
* telemini-v3.0: make git ignore build productsBdale Garbee2017-04-25
* telebt-v4.0: make git ignore products of buildBdale Garbee2017-04-25
* telegps-v2.0: slow down radio chip spi speedBdale Garbee2017-04-25
* telebt-v4.0: slow down SPI speed to radio chipBdale Garbee2017-04-25
* telebt-v4.0: turn off pin remapping in the flash loader, tooBdale Garbee2017-04-25
* telebt-v4.0: don't need the USB pin remapping flagBdale Garbee2017-04-25
* telebt-v4.0: add ao_send_packetBdale Garbee2017-04-25
* Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altosBdale Garbee2017-04-25
|\
| * altos/nucleo-32: Add lisp save/restoreKeith Packard2017-04-24
| * altos/telegps-v2.0: git ignore make resultsKeith Packard2017-04-24
| * Ignore ao_lisp_testKeith Packard2017-04-24
| * altos: Add telemini-v3.0 and easymini-v2.0 to default altos buildKeith Packard2017-04-24
| * altos/easymini-v2.0: Add EasyMini v2.0Keith Packard2017-04-24
| * altos/telemini-v3.0: Fix licenseKeith Packard2017-04-24
| * altos/stmf0: Not all timer configurations use AF2Keith Packard2017-04-24
* | telebt-v4.0: initial creation of firmware for new product, no BT yetBdale Garbee2017-04-25
|/
* altos/ao_pad.c: Use #if HAS_LOG instead of #ifdef HAS_LOGKeith Packard2017-04-24
* altos: Move old AO_LAUNCH defines to cc1111/ao_launch.hKeith Packard2017-04-22
* allow multiple tests to be logged on telefiretwo without rebootingBdale Garbee2017-04-23
* implement static test start and stop protocol for telefiretwo+telebtBdale Garbee2017-04-22
* eliminate spurious close bracesBdale Garbee2017-04-22
* add static test start and stop commands to radio protocol for telefiretwoBdale Garbee2017-04-22
* enable logging support in telefiretwoBdale Garbee2017-04-22
* cobble up a command to toggle logging on/off on TeleFireTwoBdale Garbee2017-04-22
* a stab at turning on rudimentary logging for telefiretwoBdale Garbee2017-04-22
* fleshing out logging for telefiretwoBdale Garbee2017-04-22
* enable spi flash on telefiretwoBdale Garbee2017-04-22
* fix TeleFireTwo product name in ao-list outputBdale Garbee2017-04-22
generated by cgit v1.2.3 (git 2.39.1) at 2025-10-15 17:49:33 +0000