summaryrefslogtreecommitdiff
path: root/src
Commit message (Expand)AuthorAge
...
* altos/telelco-v2.0: Use single-step quadrature codeKeith Packard2018-05-28
* altos/driver: Add support for one-step-per-click quadrature encoderKeith Packard2018-05-28
* altos/telelco-v2.0: Reduce quadrature debounce timeKeith Packard2018-05-28
* altos/drivers: Make quadrature debounce longer by default. Fix state trackingKeith Packard2018-05-28
* altos/telelco-v2.0: Only switch encoder mode on push, not releaseKeith Packard2018-05-28
* altos/ao_button.c: Support up to 16 buttonsKeith Packard2018-05-28
* altos/telelco-v2: Change select button to alternate box/pad modeKeith Packard2018-05-28
* altos: Add TeleFireEight v1.0 productKeith Packard2018-05-21
* altos/drivers: Pads with multi-port firing and pad selector DIP switchKeith Packard2018-05-21
* altos/stm: Add per-LED port/pin mode in LED codeKeith Packard2018-05-16
* altos: Add TeleLCO v2.0 productKeith Packard2018-05-16
* altos/vidtime: Check for value change in normal code, not irqKeith Packard2018-05-16
* altos: add 'vidtime', a simple brightness monitorKeith Packard2018-05-07
* Merge branch 'mpusb'Keith Packard2018-05-07
|\
| * altos/mpusb-v3.0: Make it compile againKeith Packard2018-05-07
| * altos/stmf0: leave ao_power_gpio names undefined without power managementKeith Packard2018-05-07
| * altos: Add µPusb v3.0 projectKeith Packard2018-05-07
* | altos/test: Replace state name with 10* state value in test log. Fix raw speedKeith Packard2018-05-07
* | altos: Eliminate height requirement for coast detectKeith Packard2018-05-07
* | altos/chaoskey-v1.0: Add endpoint for reading flash contentsKeith Packard2018-05-07
* | altos/stmf0: Fix up USB debug codeKeith Packard2018-05-07
* | altos/stmf0: Add IN3 alternate endpoint supportKeith Packard2018-05-07
* | altos/stmf0: Toggle IN2 SW_BUF bit when sending dataKeith Packard2018-05-07
* | altos/kernel: Add USB descriptors for IN3Keith Packard2018-05-07
* | altos/kernel: Define usb IN2/IN3 functionsKeith Packard2018-05-07
|/
* altos/stmf0: Set 0x0 mapping to Main Flash for boot loaderKeith Packard2018-05-01
* altos/stmf0: whitespace fixKeith Packard2018-05-01
* altos/stmf0: Change tests for AO_BOOT_CHAIN and AO_BOOT_PIN to #ifKeith Packard2018-05-01
* altos/fox1ihu: Pull down radio control pin in flash loaderKeith Packard2018-04-26
* Remove ao_radio_cal from stm products without radiosKeith Packard2018-04-26
* had the sense backwards .. presence of 'attached' should put us in the loaderBdale Garbee2018-04-26
* move signal that forces flash-loader on to PB8, active highBdale Garbee2018-04-26
* altos: Build fox1ihu by defaultKeith Packard2018-04-26
* altos/fox: Enable system timer in flash loader and prod watchdog with itKeith Packard2018-04-26
* altos/fox: Update ADC to fox-1 IHU Revision 2Keith Packard2018-04-26
* altos/fox: Transition to current altos build environmentKeith Packard2018-04-26
* altos/fox: update product name to show v2, enable watchdog by defaultKeith Packard2018-04-26
* altos/fox: Run app when PD6 is lowKeith Packard2018-04-26
* altos/fox: Add fox1ihu flash loaderKeith Packard2018-04-26
* altos/fox: Add MRAM and SD card driversKeith Packard2018-04-26
* altos/fox: Enable M25 driver for MRAM.Keith Packard2018-04-26
* altos/fox: Add watchdog timerKeith Packard2018-04-26
* altos/fox: Turn on all of the fox lightsKeith Packard2018-04-26
* altos/fox: Provide names for fox ADC channelsKeith Packard2018-04-26
* altos/fox: Fix up Fox ADC bitsKeith Packard2018-04-26
* altos/fox: Initialize FOX adcKeith Packard2018-04-26
* altos/fox: rename fox productBdale Garbee2018-04-26
* altos/fox: Add fox1ihu bringup firmwareKeith Packard2018-04-26
* altos/flash-loader: On STM, don't include ao_usb_disableKeith Packard2018-04-26
* altos: Use max of 64 previous orient values when checking pyro limitsKeith Packard2018-04-26
generated by cgit v1.2.3 (git 2.39.1) at 2025-10-15 17:51:00 +0000