summaryrefslogtreecommitdiff
path: root/src
Commit message (Expand)AuthorAge
...
* altos/telebt-v3.0: Fix stdio setup for BTMKeith Packard2015-02-01
* altos: Always include a check for stdio overflowKeith Packard2015-02-01
* altos/btm: Add fancier debug. Pull serial reset port low.Keith Packard2015-02-01
* altos/stm: Add ability to delay STDIO usage for serial portsKeith Packard2015-02-01
* And, also add the TeleBT v3.0 flash loader MakefileKeith Packard2015-01-30
* Oops, forgot the TeleBT-v3.0 MakefileKeith Packard2015-01-30
* altos/stmf0: Re-implement fast ADC code for stmf0Keith Packard2015-01-27
* altos/usbtrng-v2.0: Use stmf042 hardware CRC unitKeith Packard2015-01-27
* altos/stmf0: Add CRC driverKeith Packard2015-01-27
* altos/stmf0: Remove remaining stm32l bits from stm32f0 codeKeith Packard2015-01-27
* altos/stm: Fix typo in stm32l.hKeith Packard2015-01-26
* altos/usbtrng-v2.0: Add random output commandKeith Packard2015-01-26
* altos/stmf0: Add ADC and DMA APIsKeith Packard2015-01-26
* altos/stmf0: Add faster USB pathKeith Packard2015-01-26
* altos/stmf0: Fix linker scripts to make ao_boot workKeith Packard2015-01-26
* ao-tools: Add --wait option to ao-usbloadKeith Packard2015-01-25
* altos: Add flash-loader to usbtrng-v2.0Keith Packard2015-01-25
* altos: Add self-flash support for STM32F042 processorKeith Packard2015-01-25
* altos: USBtrng v2.0 hardware bringupKeith Packard2015-01-25
* altos: Initial STMF04x supportKeith Packard2015-01-25
* altos: Add support for TeleBT v3.0Keith Packard2015-01-24
* altos/lpc: Fix double-buffered USB changesKeith Packard2015-01-22
* altos: Get rid of some accidental debug codeKeith Packard2015-01-22
* Set version to 1.5.9.11.5.9.1Keith Packard2015-01-16
* altos/lpc: Switch LPC SPI driver to interrupt-drivenbdale-altosdroidKeith Packard2014-12-22
* altos: Adjust CC1200 RSSI reporting valueKeith Packard2014-12-22
* altos: Document cc115l power measured at RF setting 0x03 as -31.75dBmKeith Packard2014-12-22
* altos/cc1200: With PQT wide open, we can't use PQT_REACHED for startKeith Packard2014-11-23
* altos/cc1200: Open up preamble detect to improve sensitivityKeith Packard2014-11-23
* altos/cc1200: Wait for packet to be placed in FIFO during receiveKeith Packard2014-11-23
* altos/teledongle-v1.8: Make this the same as teledongle v1.9Keith Packard2014-11-16
* altos: Allow TeleMega to be built without MPU6000Keith Packard2014-11-16
* altos/microsplash: fix .gitignore to ignore resulting binaryKeith Packard2014-11-16
* altos: Reset interrupt flags before TX in CC1200 driverKeith Packard2014-11-06
* altos/teledongle-v1.9: Switch to NXP processor as on prototype boardsKeith Packard2014-11-06
* altos/lpc: Disable JTAG when using pins for GPIOKeith Packard2014-11-06
* altos/lpc: Declare SPI send parameters as constKeith Packard2014-11-06
* altos: Use other TeleDongle LED for CRC-invalid packet reportingKeith Packard2014-11-06
* altos: Use AO_SPO_SPEED_FAST for CC1200Keith Packard2014-11-06
* altos: Stop attempting to ramp power on CC115LKeith Packard2014-11-06
* altos: Declare port register type only in arch headerKeith Packard2014-11-06
* Move teledongle 1.9 to 1.8; there's a new 1.9Keith Packard2014-11-06
* altos: Rename microwater to microsplashKeith Packard2014-11-05
* altos: Increase CC1200 SPI data rate to 8MHzKeith Packard2014-10-25
* altos: Fix up telemetry delay computationsKeith Packard2014-10-25
* altos: Perform cc1200 calibration less often. Tweak radio paramsKeith Packard2014-10-25
* altos: Remove old AO_SEND_ALL_BARO bitsKeith Packard2014-10-25
* altos: Build TeleDongle v1.9 by defaultKeith Packard2014-10-25
* altos: Increase PQT value for cc1200 improving sensitivityKeith Packard2014-10-25
* altos: Sort out ao_gps_print altitude fetchingKeith Packard2014-10-25
generated by cgit v1.2.3 (git 2.39.1) at 2025-10-15 17:49:49 +0000