summaryrefslogtreecommitdiff
path: root/src
Commit message (Collapse)AuthorAge
...
* altos/telegps: Set default log to 496kB for 4 logsKeith Packard2014-06-12
| | | | | | This leaves space for four flight logs. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Show current flight number for TeleGPSKeith Packard2014-06-12
| | | | Signed-off-by: Keith Packard <keithp@keithp.com>
* altos/telegps: Don't log data when plugged in to USBKeith Packard2014-06-12
| | | | | | | We don't want to accidentally log stuff when you're just trying to charge the battery. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos/telegps: Build .ihx versions for TeleGPSKeith Packard2014-06-11
| | | | | | Needed to load with java Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Re-enable telemini v2.0 buildsKeith Packard2014-06-11
| | | | Signed-off-by: Keith Packard <keithp@keithp.com>
* altos/telemini-v2.0: Disable beep frequency config on TeleMini v2.0Keith Packard2014-06-11
| | | | | | Not enough flash otherwise. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Disable TeleMini v2.0 build for nowKeith Packard2014-06-11
|
* altos: Set TeleGPS default log size to half of avaiable memoryKeith Packard2014-06-10
| | | | | | | | LPC11U14 doesn't have on-chip config space, so we're consuming a block of external flash. As a result, only 1984kB are available for logging. Set the default log size to half of that to store two flights. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Simplify tracker logic, removing boost detectKeith Packard2014-06-10
| | | | | | | | | | This removes the ao_flight_state value from the tracker code and makes it simply log position information when the device has moved within the last 10 log intervals. This also changes the configuration parameters to define what 'motionless' means, and what interval to configure the GPS receiver for, log data and send telemetry. Signed-off-by: Keith Packard <keithp@keithp.com>
* Revert adding state to GPS location packetsKeith Packard2014-06-10
| | | | | | TeleGPS no longer has ao_flight_state Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Make extra pyro channel firing time configurableKeith Packard2014-06-10
| | | | | | | This adds a 'I' parameter to set the extra pyro channel firing time (in ticks). This has no effect on the main/drogue channels. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Report total available log space in version commandKeith Packard2014-06-10
| | | | | | | | This provides a more accurate means of determining available log space than guessing whether some portion of the flash chip holds configuration data. Signed-off-by: Keith Packard <keithp@keithp.com>
* Revert "altos: Write current flight state to GPS data from GPS drivers"Keith Packard2014-06-10
| | | | This reverts commit db6003d34595fbd103d5b131912b6a797254f1c5.
* altos: Enable ADC for TeleGPS v1.0 battery voltage measuringKeith Packard2014-06-07
| | | | Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Encode TeleGPS battery voltage in configuration packetKeith Packard2014-06-07
| | | | | | TeleGPS doesn't need apogee delay, so re-purpose it for the battery voltage Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Make telegps builds depend on ao_tracker.hKeith Packard2014-06-07
| | | | Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Reduce tracker GPS buffer to 4 samplesKeith Packard2014-06-07
| | | | | | We just don't have enough RAM for 8 samples. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Define lat/lon sum variables as 64-bit instead of 16Keith Packard2014-06-07
| | | | | | Oops. 16 bits won't hold position information... Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Use 0x80 to indicate valid state value in the GPS location packetKeith Packard2014-06-07
| | | | | | | And only set this for tracker products; other products place state in separate state packets Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Switch TeleGPS to GPS logging formatKeith Packard2014-06-07
| | | | | | It's customized for TeleGPS uses Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Update other CONFIG_EEPROM users to set LOG_ERASE_MARKKeith Packard2014-06-07
| | | | | | | All products placing config and erase marks in on-CPU EEPROM needs to configure the erase code correctly. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Write tracker logging from tracker thread directlyKeith Packard2014-06-07
| | | | | | Also, logs 8 pre-launch GPS packets so we can get the ground position. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Write current flight state to GPS data from GPS driversKeith Packard2014-06-07
| | | | | | | This will be useful with TeleGPS which has no other packet containing flight state. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Add TeleGPS logging formatKeith Packard2014-06-07
| | | | | | | | | | | | | This is mostly like the mega format, but places the flight state in a spare byte of the GPS data and writes the gps starting location to the flight packet. Log data is written by the main tracker thread; there's no reason for a separate thread given the GPS update rate and the lack of flight controls. This means ao_log_gps has an API to be called from there, rather than a thread to run. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos/telemega-v1.0: Adjust config params to make flight erase workKeith Packard2014-06-07
| | | | | | | | | | | | | | | Flight erase records are supposed to be written after the ao_config to eeprom in telemega. They were getting written in the middle of one of the pyro channel config blocks. Put a bunch of space between the two by making the config max 1024 bytes instead of 128 bytes. Set the log erase marker to 0x55 -- eeprom comes from the factory as 0x00, so we use any value other than 0x55 to indicate 'unused' erase slots. Save space for more flight erase blocks; we've got plenty. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Clear out eeprom erase records when writing entry 0Keith Packard2014-06-07
| | | | | | | | | | When writing config/erase to eeprom, there's no 'erase' operation as on-chip eeprom is writable at a byte level. As such, we can't tell when the erase blocks get reset when the config gets written. When this happens, erase block 0 gets written explicitly, so just use that call to trigger explicit erasing of the data. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Allow value other than 0 for marking erased flightsKeith Packard2014-06-07
| | | | | | | on-chip eeprom doesn't erase to 0xff, so let TeleMega use a different value. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Allow AO_CONFIG_MAX_SIZE to be configured. Validate it.Keith Packard2014-06-07
| | | | | | | | | TeleMega config is 200 bytes. AO_CONFIG_MAX_SIZE was 128. That didn't work out well when logging erased flight information. Allow TeleMega to use a larger value (1k), and then do a compiler hack to make sure the defined value is at least as large as the ao_config structure. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Move ao_tracker.c to kernelKeith Packard2014-06-07
| | | | | | Doesn't make sense to be in product Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Add telegps-v1.0 code and loader1.3.2.2Keith Packard2014-06-05
| | | | Signed-off-by: Keith Packard <keithp@keithp.com>
* altos/telegps-v0.3: Remove ao_flight_number from main programKeith Packard2014-06-05
| | | | | | We've got logging enabled now Signed-off-by: Keith Packard <keithp@keithp.com>
* altos/telegps-v0.3: Disable APRS by default. Set log max to 1MKeith Packard2014-06-05
| | | | | | And adjust default radio cal to be a bit closer Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Force telemetry on by default for v0.3 TeleGPS boardsKeith Packard2014-06-05
| | | | | | | These don't have a USB connect indicator, so just turn on telemetry by default Signed-off-by: Keith Packard <keithp@keithp.com>
* altos/lpc: HAS_USB_CONNECT has been changed to mean a custom pinKeith Packard2014-06-05
| | | | | | | | The LPC stuff isn't actually very useful and TeleGPS uses a custom pin instead, and was using HAS_USB_CONNECT to mean the same thing. That wasn't good. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Fix config to set default log size for all devices with logKeith Packard2014-06-05
| | | | | | Not just devices with flight Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Add AO_LOG_FLIGHT packet to TeleGPS logsKeith Packard2014-06-05
| | | | | | This encodes the flight number for tracking of data files. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos/telegps-v0.3: Add tracker taskKeith Packard2014-06-05
| | | | Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Add debug to tracker to force launchKeith Packard2014-06-05
| | | | | | This lets us test the move from pad to drogue state Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: tracker distance computation flipped arguments aroundKeith Packard2014-06-05
| | | | | | ao_distance takes (lat, lon, lat, lon) not (lat, lat, lon, lon) Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Fix tracker start stateKeith Packard2014-06-05
| | | | | | | | | Make sure log can start by scanning existing logs Enable RDF by default Turn off telemetry until we decide whether to turn it on in the loop Allow TeleGPS v0.3 to run without ADC Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Stick flight state in GPS location packetsKeith Packard2014-06-05
| | | | | | Useful for TeleGPS Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Have tracker average 5 GPS samples before moving to pad modeKeith Packard2014-06-05
| | | | | | Avoids early GPS noise right after lock Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Change tracker not-moving speed to 2m/s and documentKeith Packard2014-06-05
| | | | | | Just adjust to avoid sensing motion from GPS noise Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: ao_distance was overflowing when checking for longitude wrapKeith Packard2014-06-05
| | | | | | Need to shift everyone right one bit to fit in 32 bits Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Allow cc115l driver to be built without radio power controlKeith Packard2014-06-05
| | | | | | TeleGPS just wants full power, so remove the configuration option Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Include sensor logging task only on flight boardsKeith Packard2014-06-05
| | | | | | | This lets TeleGPS use the logging infrastructure without wasting a task to log sensor data Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Add tracker task for TeleGPSKeith Packard2014-06-05
| | | | | | | This replaces the flight code to monitor GPS state and switch flight states between startup/pad/drogue Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Add ao_distance.c to compute cartesian distances on the globeKeith Packard2014-06-05
| | | | | | | This is not a great circle distance, but should be good enough for points reasonably close together Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Fetch/store only 8 bits for pyro state valuesKeith Packard2014-06-02
| | | | | | | These fields are uint8_t, not int16_t. Fetching and storing 16 bits is a bad idea. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Maximum pyro configuration parameter has 4 bytes in the nameKeith Packard2014-06-02
| | | | | | | | "f>=" needs four bytes, not just three to store the whole string. If we only store three, then we never manage to compare correctly as the null terminating byte is missing. Signed-off-by: Keith Packard <keithp@keithp.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-10-16 17:57:00 +0000