summaryrefslogtreecommitdiff
path: root/src
Commit message (Expand)AuthorAge
* altos: Stop building cc1111-based telemini v2.0 firmwareKeith Packard2016-07-27
* altos: Don't switch to flight 0 when log fills in flightKeith Packard2016-07-27
* altos: Expose cc1200 radio test functions for telemini bringupKeith Packard2016-07-27
* fixup for interleaveKeith Packard2016-07-27
* altos: Don't access cc1120 SPI bus during recv after abort has startedKeith Packard2016-07-27
* altos: Keep telemetry and command output from interleavingKeith Packard2016-07-27
* altos: Add STM32F0 beep and SPI byte API.Keith Packard2016-07-14
* altos: Add telemetrum v3.0Keith Packard2016-07-12
* Switch from GPLv2 to GPLv2+Keith Packard2016-07-12
* altos/cc1111: Remove 'show tasks' commandKeith Packard2016-06-30
* altos: Use FIFO_THR pin for cc1120 transmit bufferingKeith Packard2016-06-29
* altos: Leave USB enabled in flight with -DDEBUG=1Keith Packard2016-06-29
* altos/stm: clean up ao_exti_enableKeith Packard2016-06-29
* altos: Make task list output more usefulKeith Packard2016-06-29
* altos/telemini-v2.0: Remove show tasks commandKeith Packard2016-06-29
* altos: Make ao_delay(0) not wait foreverKeith Packard2016-06-29
* altos: cc1200: use FIFO threshold pin output for APRS bufferingKeith Packard2016-06-29
* altos: Add debug check for irq block when editing task queuesKeith Packard2016-06-29
* altos/drivers: Use more reliable byte interface for CC1120 receptionKeith Packard2016-06-29
* altos/stm: Add better byte-level SPI apiKeith Packard2016-06-29
* altos/stm: Clean up spi_enable/disable_index functionsKeith Packard2016-06-29
* altos/stm: move spi execution to common ao_spi_runKeith Packard2016-06-29
* altos: Add STM SPI debuggingKeith Packard2016-06-29
* altos: Add STM DMA debuggingKeith Packard2016-06-29
* altos/stm: Change ao_spi_send_sync definition to take const sourceKeith Packard2016-06-29
* altos/stm: Add more SPI status register bitsKeith Packard2016-06-29
* altos/stm: use 0xff for dma mutex value for allocated mutexesKeith Packard2016-06-29
* altos/stm: remove ao_dma_abortKeith Packard2016-06-29
* altos: Move comment in ao_sleep_for next to related codeKeith Packard2016-06-29
* altos: Block interrupts while waking tasks sleeping on timers.Keith Packard2016-06-29
* altos/stmf0: Remove ao_usb_freeKeith Packard2016-06-11
* altos/stmf0: Rework the sram allocation to save a few text bytesKeith Packard2016-06-11
* altos/cc1115l: Reduce trace buffer sizeKeith Packard2016-06-10
* altos/stm: Handle USB reset in STM32L usb driverKeith Packard2016-06-10
* altos/lpc: Handle USB reset by resetting internal stateKeith Packard2016-06-10
* stmf0: Do not send more data than requested for GET_DESCRIPTORKeith Packard2016-06-09
* stmf0: Clear all USB state when resetting chip. Wakeup all sleepersKeith Packard2016-06-09
* telegps-v1.0: Document how SN 1959 was fixedKeith Packard2016-06-09
* altosuilib: Fill preload map on site or lat/lon changeKeith Packard2016-05-27
* altos/cc1111: Use SW to drive UART RTS pinKeith Packard2016-05-09
* Ignore some built files for 1.6.3Keith Packard2016-05-06
* altos: Make sure AO_MMA655X_INVERT is declared where neededKeith Packard2016-05-02
* Revert "altos/stm: Run scheduler code on interrupt stack"Keith Packard2016-04-30
* altos: Clear packet queue when starting packet masterKeith Packard2016-04-25
* altos/telebt-v3.0: Flip CTS/RTS pins for BT moduleKeith Packard2016-04-25
* altos/stm32l: Add support for software-driven HW flow controlKeith Packard2016-04-25
* altos: Use TXE instead of TC for serial on STM32lKeith Packard2016-04-25
* Debug bits for telebtKeith Packard2016-04-25
* altos: avoid mixed declarations and code in ao_task.cKeith Packard2016-04-19
* altos/telefiretwo-v0.2: Change alarm names in commentKeith Packard2016-04-19