summaryrefslogtreecommitdiff
path: root/src
Commit message (Expand)AuthorAge
...
| * altos/telegps-v2.0: git ignore make resultsKeith Packard2017-04-24
| * Ignore ao_lisp_testKeith Packard2017-04-24
| * altos: Add telemini-v3.0 and easymini-v2.0 to default altos buildKeith Packard2017-04-24
| * altos/easymini-v2.0: Add EasyMini v2.0Keith Packard2017-04-24
| * altos/telemini-v3.0: Fix licenseKeith Packard2017-04-24
| * altos/stmf0: Not all timer configurations use AF2Keith Packard2017-04-24
* | telebt-v4.0: initial creation of firmware for new product, no BT yetBdale Garbee2017-04-25
|/
* altos/ao_pad.c: Use #if HAS_LOG instead of #ifdef HAS_LOGKeith Packard2017-04-24
* altos: Move old AO_LAUNCH defines to cc1111/ao_launch.hKeith Packard2017-04-22
* allow multiple tests to be logged on telefiretwo without rebootingBdale Garbee2017-04-23
* implement static test start and stop protocol for telefiretwo+telebtBdale Garbee2017-04-22
* eliminate spurious close bracesBdale Garbee2017-04-22
* add static test start and stop commands to radio protocol for telefiretwoBdale Garbee2017-04-22
* enable logging support in telefiretwoBdale Garbee2017-04-22
* cobble up a command to toggle logging on/off on TeleFireTwoBdale Garbee2017-04-22
* a stab at turning on rudimentary logging for telefiretwoBdale Garbee2017-04-22
* fleshing out logging for telefiretwoBdale Garbee2017-04-22
* enable spi flash on telefiretwoBdale Garbee2017-04-22
* fix TeleFireTwo product name in ao-list outputBdale Garbee2017-04-22
* altos/stmf0: Pull beeper pin low when beeper is offKeith Packard2017-04-21
* altos/lpc: Really fix aes entry in lpc vpathKeith Packard2017-04-21
* alots/stmf0: Fix vpath entry for AES directoryKeith Packard2017-04-21
* altos/lpc,altos/stmf0: Use -n flag to work around link editor issueKeith Packard2017-04-21
* altos/telemini-v3.0: Remove vestiges of the pre-USB codeKeith Packard2017-04-21
* altos/lpc: Add (void *) cast to fix alignment warningKeith Packard2017-04-21
* altos/lpc: Fix up Makefile definitionsKeith Packard2017-04-21
* altos/telemini-v3.0: Add flash loaderKeith Packard2017-04-19
* altos/telemini-v3.0: Update to production hardwareKeith Packard2017-04-19
* altos/telebt-v3.0: Add LCO bits for testingKeith Packard2017-04-19
* altos/telefiretwo-v0.2: Add AO_CC1200_SPI_SPEEDKeith Packard2017-04-19
* add new ADC channels for telefiretwoBdale Garbee2017-04-19
* need top level Makefile tooBdale Garbee2017-04-18
* builds, loads, runs, not very useful yetBdale Garbee2017-04-18
* copy telefiretwo-v0.2 to start firmware for v1.0Bdale Garbee2017-04-18
* telegps-v2.0: Remove fec_tx code and ADC logging.Keith Packard2017-04-13
* altos/stmf0: Split up rom load in altos.ld to make linker happyKeith Packard2017-04-13
* cortexelf-v1: Fetch data at TPB rising when MWR or MRD are lowKeith Packard2017-04-13
* altos/telegps: Inherit LDFLAGS from lpc make specificationKeith Packard2017-04-13
* initial cut at telegps-v2.0 firmwareBdale Garbee2017-04-13
* cortexelf-v1: Initialize key matrix codeKeith Packard2017-04-09
* cortexelf-v1: Bump SPI pin speed to 40MHz to for sdcard. Fix VGA DMA.Keith Packard2017-04-09
* altos: Use MP switch in cortexelf boot loader for force loader modeKeith Packard2017-04-09
* altos: Escape lisp REP loop with () inputKeith Packard2017-04-09
* altos: Document a few more SPI mode bits in VGA driverKeith Packard2017-04-09
* altos: Drive row low instead of high in matrix driverKeith Packard2017-04-09
* altos: Place AS1107 in 'normal' mode at end of init sequenceKeith Packard2017-04-09
* cortexelf-v1: More 1802 noodlingKeith Packard2017-04-04
* stm: Add more mask-based GPIO controlsKeith Packard2017-04-04
* altos: Allow programs to enable SDCARD debugging if desiredKeith Packard2017-04-04
* altos: Disable FAT commands unless requestedKeith Packard2017-04-04
generated by cgit v1.2.3 (git 2.39.1) at 2026-01-30 19:36:40 +0000