summaryrefslogtreecommitdiff
path: root/src
Commit message (Collapse)AuthorAge
* Merge remote-tracking branch 'origin/master'Keith Packard2017-08-11
|\
| * add TeleBT v4.0 to the list of stuff we buildBdale Garbee2017-07-21
| |
| * ignore more build products in telebt-v4.0 treeBdale Garbee2017-07-21
| |
| * Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altosBdale Garbee2017-07-21
| |\
| * | clean up telefireone name referencesBdale Garbee2017-07-21
| | |
* | | altos/test: Fix AES key format in test codeKeith Packard2017-07-23
| | | | | | | | | | | | | | | | | | Use temp variable instead of stepping on the AES name. Signed-off-by: Keith Packard <keithp@keithp.com>
* | | altos/test: Fix printf format for int64 arithmetic testKeith Packard2017-07-23
| |/ |/| | | | | | | | | Use 'long long' and %lld for 64-bit values when printing. Signed-off-by: Keith Packard <keithp@keithp.com>
* | altos/test: Add EasyMini test modeKeith Packard2017-07-21
| | | | | | | | | | | | Use baro-only mode, parse easymini logs. Signed-off-by: Keith Packard <keithp@keithp.com>
* | altos/telebt-v4.0: Use HW flow control to BT moduletime-seriesKeith Packard2017-06-27
| | | | | | | | | | | | Now that the stmf0 HW flow control works... Signed-off-by: Keith Packard <keithp@keithp.com>
* | altos/stmf0: Initialize UART RTS/CTS before turning it onKeith Packard2017-06-27
| | | | | | | | | | | | If you try this after the UART is running, it won't work. Signed-off-by: Keith Packard <keithp@keithp.com>
* | altos/rn4678: Add BLE supportKeith Packard2017-06-20
| | | | | | | | | | | | This just means ignoring the BLE connect status message. Signed-off-by: Keith Packard <keithp@keithp.com>
* | altos/telebt-4.0: Add dependency on RN4678 headerKeith Packard2017-06-13
| | | | | | | | Signed-off-by: Keith Packard <keithp@keithp.com>
* | altos: Add timeout to RN4678 status message codeKeith Packard2017-06-13
| | | | | | | | | | | | | | | | If we see the start of an RN4678 status message, but then output pauses, assume that this isn't the start of a status message and flush the pending data. Signed-off-by: Keith Packard <keithp@keithp.com>
* | altos: Create separate log format for EasyMini v2.0Keith Packard2017-06-11
| | | | | | | | | | | | | | The ADC in the STM32F0 is different than the LPC, with a range of 0-4095 instead of 0-32767. Signed-off-by: Keith Packard <keithp@keithp.com>
* | altos: HMC5883 output order is X Z YKeith Packard2017-06-11
| | | | | | | | | | | | | | | | | | | | Re-label everything to have the correct names. This doesn't actually change the code at all, so the eeprom and telemetry is all compatible. Matching changes on the host side will be required to actually process the data correctly, of course. Signed-off-by: Keith Packard <keithp@keithp.com>
* | altos: Update sensor data atomicallyKeith Packard2017-06-11
| | | | | | | | | | | | | | | | | | | | | | Read data into a temp variable, block interrupts, then update the published value. The bug is easy to see with the HMC5883 which has to byte-swap the output of the chip, and hence can occasionally get caught with the wrong byte order data. Signed-off-by: Keith Packard <keithp@keithp.com>
* | altos/telebt-v3.0: Add send_packet commandKeith Packard2017-05-19
| | | | | | | | | | | | Useful for doing host-based RF protocols. Signed-off-by: Keith Packard <keithp@keithp.com>
* | altos/telebt-v4.0: Remove HAS_POLLCHARKeith Packard2017-05-19
| | | | | | | | | | | | This isn't being used anymore. Signed-off-by: Keith Packard <keithp@keithp.com>
* | altos/telefireone-v1.0: Fix confusing defines about config storageKeith Packard2017-05-19
|/ | | | | | | USE_INTERNAL_FLASH is about storing config data in internal flash, and should be on for telefireone. Signed-off-by: Keith Packard <keithp@keithp.com>
* re-brand current telefiretwo product as telefireoneBdale Garbee2017-05-15
|
* altos/ao_rn4678: Send '$$$' for new devices. Fix name setting code.Keith Packard2017-05-15
| | | | | | | | | New devices won't respond to the cmd pin we have configured, so get them to command mode by sending the $$$ string. Somehow I'd botched the name setting code and hadn't caught it as I hadn't tried a new device... Signed-off-by: Keith Packard <keithp@keithp.com>
* altos/stmf: Fix up serial port flow control configuration bitsKeith Packard2017-05-15
| | | | | | | | | Compute whether any sw/hw flow control is in use. Compute whether hw flow control is in use as a separate value. These make the code a bit easier to follow. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos/telebt-v4.0: Hook up RN4678 moduleKeith Packard2017-05-13
| | | | | | | We've switched from the BM70 to this module which offers a virtual serial channel over both BT and BTLE. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Add RN4678 Bluetooth module driverKeith Packard2017-05-13
| | | | | | | | | This works much like the old BTM module, but supports both bluetooth and bluetooth LE. I've poked at it briefly over BTLE to see that it appears to have the right name, but haven't attempted to communicate over BTLE yet. Signed-off-by: Keith Packard <keithp@keithp.com>
* telefiretwo: don't try to record pre-burn sensor values in FLIGHT recordBdale Garbee2017-05-11
|
* altos/telemini-v3.0: Use dbg connector pin 5 for force bootloaderKeith Packard2017-05-04
| | | | | | This works way better than attempting to use the beeper pin. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos/telemini-v3.0: Add 'recovery mode' on PA14 (pin 6 on dbg header)Keith Packard2017-05-04
| | | | | | | | Connect this pin to GND (pin 3) and TeleMini will come up with N0CALL at 434.550MHz using the original frequency calibration. Helps recover from accidental mis-configuration. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Move 'ao_force_freq' to ao_config.cKeith Packard2017-05-04
| | | | | | Instead of having to add it to each product using this variable. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Make CDC ACM 'line coding' publicKeith Packard2017-05-04
| | | | | | This allows other systems to see what baud rate the host has requested. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos/telebt-v4.0 Set CPU clock to 48Mhz instead of 96MhzBdale Garbee2017-05-03
|
* altos/telegps-v2.0: Disable external serial port to save ROMKeith Packard2017-05-02
| | | | | | We'll have to rewrite some of the serial code to avoid sucking memory here. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos/stmf0: Add code to use SoC flash as storageKeith Packard2017-05-02
| | | | Signed-off-by: Keith Packard <keithp@keithp.com>
* altos/telegps-v2.0: Reorder initialization sequenceKeith Packard2017-04-30
| | | | | | | | This tries to be a bit more logical about the board initialization sequence, starting with the OS, then the support hardware, internal drivers, external drivers and finally services. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos/telegps-v2.0: CC1200 CS is PA1, not PA5.Keith Packard2017-04-30
| | | | | | | Also remove some unneeded config of an additional pin for MCU wakeup, which the CC1120 needs but the CC1200 does not. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos/telegps-v2.0: GPS chip is connected to serial 2, not serial 1Keith Packard2017-04-30
| | | | | | Turn on serial 2 and use it for GPS. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos/telegps-v2.0: Remove some unneeded definesKeith Packard2017-04-30
| | | | | | HAS_MS5607 and HAS_RADIO_RECV aren't useful. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos/telegps-v2.0: Battery ADC input is on PB1, not PA0Keith Packard2017-04-30
| | | | | | Rewire as needed. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos/telegps-v2.0: Set CPU clock to 48MHz instread of 96MHzKeith Packard2017-04-30
| | | | | | Turns out the CPU doesn't run well at that speed. Who would have guessed? Signed-off-by: Keith Packard <keithp@keithp.com>
* altos/telegps-v2.0: Adjust LED configKeith Packard2017-04-30
| | | | | | The LED is green, not red. Use it for panic and GPS lock. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos/kernel: Allow TeleGPS v2 to scale battery in telemKeith Packard2017-04-30
| | | | | | | | | TeleGPS v2 uses the STMF0 processor instead of the LPC11, which means the ADC range is different. As the raw ADC value was getting sent to represent battery voltage in the config packet, we need to scale that for the different processor. This patch allows that to happen. Signed-off-by: Keith Packard <keithp@keithp.com>
* src/kernel: Add GPS lock blink LED to tracker codeKeith Packard2017-04-30
| | | | | | Blinks an LED briefly once every three seconds when GPS is locked. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Build MicroPeak-v2.0 by defaultKeith Packard2017-04-28
| | | | Signed-off-by: Keith Packard <keithp@keithp.com>
* altos/micropeak-v2.0: Add initial MicroPeak v2 supportKeith Packard2017-04-28
| | | | | | | stm32f042 processor replaces the attiny85 and adds USB support along with more storage. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos/stmf0: Add support for HSI clocked applicationsKeith Packard2017-04-28
| | | | | | And allow application space to be limited to less than available flash. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos/stmf0: Fix HSI clock rate.Keith Packard2017-04-28
| | | | | | It's 8MHz, not 16MHz Signed-off-by: Keith Packard <keithp@keithp.com>
* altos/stmf0: Make sure systick is off before programmingKeith Packard2017-04-28
| | | | Signed-off-by: Keith Packard <keithp@keithp.com>
* altos/stmf0: Compute serial baud rate registers at runtimeKeith Packard2017-04-28
| | | | | | | This allows the system clock to vary at runtime, instead of requiring a fixed value. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos/micropeak: Update ao_micropeak.h for MicroPeak v2Keith Packard2017-04-28
| | | | | | Allow different sample times, add constant for MicroPeak v2 log files. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos/micropeak: Use existing ao_ms5607_current variableKeith Packard2017-04-28
| | | | | | Instead of defining another. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Add header file for ao_report_micro.cKeith Packard2017-04-28
| | | | | | Defines the functions in this file. Signed-off-by: Keith Packard <keithp@keithp.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-10-15 14:35:23 +0000