summaryrefslogtreecommitdiff
path: root/src
Commit message (Expand)AuthorAge
* altos/flash-loader: Check memory addresses against flash spaceKeith Packard2014-05-12
* altos/stm: Use #define'd constants for GPIO register addressesKeith Packard2014-05-12
* altos/stm: Figure out available flash space based on chip id registersKeith Packard2014-05-12
* altos/stm: White space fix in ao_boot_pin.cKeith Packard2014-05-12
* altos/stm: Use flash address of boot loader instead of 0x0Keith Packard2014-05-12
* altos: Assume all LPC products will have 32KB of flashKeith Packard2014-05-12
* altos: Report amount of program space available in the version commandKeith Packard2014-05-12
* altos: Add LED test command to pca9922 driverKeith Packard2014-05-12
* altos: Simplify quadrature trackingKeith Packard2014-05-09
* altos: Clean up trailing whitespace in ao_pad.cKeith Packard2014-05-08
* altos: Fix byte offsets in the mega AO_LOG_FLIGHT packetsKeith Packard2014-05-08
* altos: ublox driver always offers course data when it has a fixKeith Packard2014-05-08
* altos: 8051 64 * 16 multiply function was broken for negative 64-bitKeith Packard2014-05-08
* relay control implemented, this project is now completeBdale Garbee2014-05-08
* first cut of usbrelay-v0.1 support .. LEDs wiggle, not switching relay yetBdale Garbee2014-05-08
* altos: Add configurable beep toneKeith Packard2014-05-02
* altos: For telelco discovery packets, retry 5 times with shorter timeoutKeith Packard2014-04-30
* altos: Switch beeping to farnsworth spacingKeith Packard2014-04-12
* altos: Add 'microwater' productKeith Packard2014-04-11
* altos: Fix nanopeak compileKeith Packard2014-04-06
* altos: Provide stable binaries for MicroPeakKeith Packard2014-04-06
* altos: Replace C code attiny async output with inline asmKeith Packard2014-04-06
* altos: Build TeleBalloon v2.0 by defaultKeith Packard2014-04-05
* altos: Report battery voltage instead of S at startupKeith Packard2014-04-05
* altos: Rename 'core' to 'kernel'Keith Packard2014-04-05
* altos: HAS_LED is useless; remove itKeith Packard2014-03-28
* Add easymega firmwareKeith Packard2014-03-16
* altosui: Hide Tilt Angle values when not availableKeith Packard2014-03-10
* altos: Another missing usbtrng fileKeith Packard2014-03-09
* altos: Missing ao_pins files for usbtrngKeith Packard2014-03-09
* altos: Fix LPC LED driverKeith Packard2014-03-09
* altos: fix building LPC serial support for STDIOKeith Packard2014-03-09
* altos: Don't require projects to define PACKET_HAS_SLAVEKeith Packard2014-03-09
* Add USB True Random Number Generator productKeith Packard2014-03-08
* Re-add LCD bits to stm-demoKeith Packard2014-03-08
* Add flash loader for stm-demo boardKeith Packard2014-03-08
* altos: Create balloon-specific load for TMv2 hardwareKeith Packard2014-02-18
* altos: Make balloon code run againKeith Packard2014-02-18
* altos: Set reasonable accel values when !HAS_ACCELKeith Packard2014-02-18
* altos: Expose ao_usb_running globallyKeith Packard2014-02-18
* altos: Move balloon flight code to coreKeith Packard2014-02-18
* altos: Put locked/unlocked GPS status in APRS commentsKeith Packard2014-02-09
* altos: Re-send previous GPS position in APRS if lock is lostKeith Packard2014-02-09
* altos: Fixup named ADC printingKeith Packard2014-02-08
* altos: Add needed math sources to TeleGPS v0.1 buildKeith Packard2014-02-08
* altos: Report nsat in view in APRS packetKeith Packard2014-02-08
* altos: Don't write more than 12 sat infos in ublox driverKeith Packard2014-02-08
* altos/stm: Block interrupts while reprogramming flashKeith Packard2014-02-08
* altos: Enable system timer in flash loader and prod watchdog with itKeith Packard2014-02-08
* altos: Eliminate warnings in FAT codeKeith Packard2014-02-08