summaryrefslogtreecommitdiff
path: root/src
Commit message (Collapse)AuthorAge
* Ignore some built files for 1.6.3Keith Packard2016-05-06
| | | | Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Make sure AO_MMA655X_INVERT is declared where neededKeith Packard2016-05-02
| | | | | | | | Add #define AO_MMA655X_INVERT 0 to existing products which didn't declare it at all. This will make sure the value is set correctly for each new board. Signed-off-by: Keith Packard <keithp@keithp.com>
* Revert "altos/stm: Run scheduler code on interrupt stack"Keith Packard2016-04-30
| | | | | | This reverts commit 6a9546413d6a236c010e806b50506d870961d074. This causes the device to stop reliably handling interrupts.
* altos: Clear packet queue when starting packet masterKeith Packard2016-04-25
| | | | | | | | This avoids overfilling the packet buffer when disconnected. Applications using packet mode shouldn't expect that output be saved across master sessions. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos/telebt-v3.0: Flip CTS/RTS pins for BT moduleKeith Packard2016-04-25
| | | | | | | These are wired backwards, so ask that the right pins be used, which requires switching to software control of the pins. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos/stm32l: Add support for software-driven HW flow controlKeith Packard2016-04-25
| | | | | | | | This allows applications to request that the flow control bits be driven from software rather than hardware, permitting more flexible pin configuration. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Use TXE instead of TC for serial on STM32lKeith Packard2016-04-25
| | | | | | | Using TXE allows for full-speed communication, rather than waiting for each byte to be transmitted before inserting the next into the queue. Signed-off-by: Keith Packard <keithp@keithp.com>
* Debug bits for telebtKeith Packard2016-04-25
|
* altos: avoid mixed declarations and code in ao_task.cKeith Packard2016-04-19
| | | | | | sdcc can't handle this. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos/telefiretwo-v0.2: Change alarm names in commentKeith Packard2016-04-19
| | | | | | The PCB is labeled 'A' and 'B'. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos/stmf0: Fix external interruptsKeith Packard2016-04-19
| | | | | | | | Missing a reserved address in the registers broke everything nicely, but the priority values were also wrong - stm32f0 exposes 8 bits per priority, like the stm32l, but it uses only the top two bits. Signed-off-by: Keith Packard <keithp@keithp.com>
* Add TeleFireTwo v0.2 projectKeith Packard2016-04-19
| | | | | | | This is much like TeleFireTwo v0.1, with only one pyro channel and added siren and strobe Signed-off-by: Keith Packard <keithp@keithp.com>
* altos/telelcotwo: Add idle timeoutKeith Packard2016-04-19
| | | | | | | | Puts TeleLCOTwo in a low power state (drawing about 80µA) after a timeout (default two minutes) to keep from killing the battery if the device is left turned on. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Use simpler debounce logic for buttonsKeith Packard2016-04-19
| | | | | | | | | | | Instead of waiting for a while after the transition to decide if it has stuck, signal the event right away and then ignore other transitions for the debounce interval. This seems to work just as reliably, but has the benefit of eliminating button latency at press time. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Add ao_lco_two.c; alternate LCO interface codeKeith Packard2016-04-19
| | | | | | | | The LCO interface is likely to end up very device specific as the interactions depends on the input devices. Here's a version for TeleLCOTwo, which has two arming switches and a firing button. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Fix telefiretwo .gitignoreKeith Packard2016-04-19
| | | | | | Was ignoring the wrong built files Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Add TeleLCOTwo firmwareKeith Packard2016-04-19
| | | | | | The LCO side of a two-channel launch controller setup. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Support pad/lco boxes with fixed box numbersKeith Packard2016-04-19
| | | | | | | This allows for a configuration without adjustable box numbers on either end of the link, simplifying the UI. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Allow for pad boxes with different sensor configurationsKeith Packard2016-04-19
| | | | | | | | This allows for a pad box without a resistor from power to each FET. That resistor is needed to detect welded relays, but in a solid-state system, that's not a possibility. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: telefiretwo-v0.1 bitsKeith Packard2016-04-19
| | | | | | Get this board running. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Add pad support for new telefire versionsKeith Packard2016-04-19
| | | | | | | | | | | | Makes the voltage divider values configurable, and allows for pyro channels that don't have the resistors necessary to check for a stuck relay. Also supports STM32L processors with wider GPIO registers, and uses the new ao_gpio_set/clr_bits functions to fire igniters rather than cc1111-specific code. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Support telefire products in cc1200 driverKeith Packard2016-04-19
| | | | | | Need to disable the pad code while testing the radio. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos/detherm: Add servo driverKeith Packard2016-04-13
| | | | | | This just provides commands to test the servo with. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos/detherm: Add ms5607 to dethermKeith Packard2016-04-13
| | | | Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Add easy mini plotting helper in test codeKeith Packard2016-04-13
| | | | Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Add ao_gpi_set/clr_bits functionsKeith Packard2016-04-13
| | | | | | These set or clear a group of bits in a single GPIO register all together. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos/stmf0: Add pwm and exti driversKeith Packard2016-04-02
| | | | Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Add detherm productKeith Packard2016-04-02
| | | | Signed-off-by: Keith Packard <keithp@keithp.com>
* altos/stmf0: Support HPE clock sourceKeith Packard2016-04-02
| | | | | | Allows the use of crystals instead of requiring USB. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos/stmf0: Add SPI driver.Keith Packard2016-04-02
| | | | | | | This also changes the DMA interface a bit so we can select for interrupts on only the interesting channels. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Use mini logging for detherm, just without ADCKeith Packard2016-04-02
| | | | Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Add Detherm log format (easymini without ADC)Keith Packard2016-04-02
| | | | Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Allow for flight hardware without any ADC valuesKeith Packard2016-04-02
| | | | | | | Detherm has no ADC connections, so we don't need to disable the ADC when going to landed state. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Add one-byte SPI output routine for LPC and STM coresKeith Packard2016-03-26
| | | | | | This allows for SPI output at interrupt time, one byte at a time. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos/lpc: Add fast timerKeith Packard2016-03-26
| | | | | | This offers a faster timer callback for higher-precision operation Signed-off-by: Keith Packard <keithp@keithp.com>
* altos/stm: Allow apps to define different stack sizeKeith Packard2016-03-26
| | | | | | | While 512 bytes is a reasonable size, sometimes apps don't have that much stack space. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos/stm: Validate current task SP in interrupt by looking at PSPKeith Packard2016-03-26
| | | | | | | | | We use a separate stack pointer for task code, which means we can verify that it is in range in any interrupt handler. This adds checks for the task stack (under #ifdef DEBUG) that run in ao_wakeup as well as at every timer interrupt. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos/stm: Run scheduler code on interrupt stackKeith Packard2016-03-26
| | | | | | This provides a bit more room for tasks on their stack Signed-off-by: Keith Packard <keithp@keithp.com>
* altos/stmf0: Construct .bin files for flash loadersKeith Packard2016-03-18
| | | | | | | This builds a .bin file which can be used with dfu-util instead of using openocd to load the initial flash loader. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Expose fast timer API from kernel/Keith Packard2016-03-18
| | | | | | This allows multiple SoCs to provide the same driver interface Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Fixed timing of panic display LED to be readableBart Massey2016-03-07
| | | | | | | | | | | When we don't have a beeper, there's no way to signal a 'warble' for panic. So, elide that bit. Second, panic can't use the scheduler and timer because those may not be running (or may have failed), and so it uses a delay loop. Add a configurable scale value to the panic loop so that the LED blinks can be read. For stm32f0 devices, scale that by the sysclk value to automatically make them of reasonable length.
* altos/stmf0: Fix build without second USB IN endpointKeith Packard2016-03-05
| | | | | | The code for the second IN endpoint was using the wrong ifdef. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Add ChaosKey v1.0 productKeith Packard2016-03-02
| | | | | | Much like ChaosKey v0.1, just different SoC package and a few wiring changes. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos/chaoskey: Add another USB endpoint to read raw dataKeith Packard2016-03-02
| | | | | | | | | | | This replaces having the single output switch based on a pin value and allows us to box the device and still fetch raw data. For now, this will use a special libusb2 program, ao-chaosread, to pull bits as I haven't figure out how to make linux provide two /dev entries for one USB device. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos/chaoskey: Use SoC device ID as serial numberKeith Packard2016-02-15
| | | | | | | | | To make manufacturing these devices tractable, we don't want to require a custom firmware load for each device, but we still want a unique serial number. Fortunately, the SoC provides a 96-bit ID which we can use. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos/stmf0: Use device ID as usb serial number if requestedKeith Packard2016-02-15
| | | | | | | | This exposes the hardware device ID (which is unique per-chip) as the USB serial number, avoiding the need to create a custom ROM image for each device. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos/chaoskey: Encode both hardware and software versions in product IDKeith Packard2016-02-15
| | | | | | | We have no other way of reporting the software version, so just encode it in the product ID. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos/stmf0: Fix location of device_id registerKeith Packard2016-02-15
| | | | | | Copied from stm32l and never fixed. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Another fix for non CDC-ACM devicesKeith Packard2016-02-08
| | | | | | | Need to set the bInterfaceNumber for the actual interface to zero when there isn't an INT interface before it. Signed-off-by: Keith Packard <keithp@keithp.com>
* Clean up stmf0 adc init.Bart Massey2016-02-08
| | | | | | This better matches the documented cal sequence. Signed-off-by: Keith Packard <keithp@keithp.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-10-16 06:46:58 +0000