summaryrefslogtreecommitdiff
path: root/src
Commit message (Expand)AuthorAge
* altos: ao_packet_getchar needs to return 'int' so AO_READ_AGAIN worksKeith Packard2015-02-07
* altos: Separate out ao_tracker force from dbgKeith Packard2015-02-07
* altos/lpc: Give up on interrupt-driven SPI driverKeith Packard2015-02-07
* altos/drivers: Increase SPI speed of CC115L to 6MHzKeith Packard2015-02-07
* altos/lpc: Double buffer USB data transfersKeith Packard2015-02-05
* altos/lpc: Clean up USB endpoint access functionsKeith Packard2015-02-05
* altos/easymini-v1.0: Shrink stack to deal with USB changesKeith Packard2015-02-05
* altos/teledongle-v3.0: Shrink stacks to 320 bytes to fit in ramKeith Packard2015-02-05
* Revert LPC usb performance improvementsKeith Packard2015-02-05
* Revert "altos/lpc: Fix double-buffered USB changes"Keith Packard2015-02-05
* altos: Rename teledongle-v1.9 as teledongle-v3.0Keith Packard2015-02-04
* altos/telebt-v3.0: Set initial radio cal to a sensible valueKeith Packard2015-02-04
* altos/telebt-v3.0: Add monitor bitsKeith Packard2015-02-01
* altos/usbtrng-v2.0: Select PA11/PA12 mapping config valueKeith Packard2015-02-01
* altos/stmf0: Support PA11/PA12 remappingKeith Packard2015-02-01
* altos/telebt-v3.0: Turn red LED off after initializationKeith Packard2015-02-01
* altos/telebt-v3.0: Fix stdio setup for BTMKeith Packard2015-02-01
* altos: Always include a check for stdio overflowKeith Packard2015-02-01
* altos/btm: Add fancier debug. Pull serial reset port low.Keith Packard2015-02-01
* altos/stm: Add ability to delay STDIO usage for serial portsKeith Packard2015-02-01
* And, also add the TeleBT v3.0 flash loader MakefileKeith Packard2015-01-30
* Oops, forgot the TeleBT-v3.0 MakefileKeith Packard2015-01-30
* altos/stmf0: Re-implement fast ADC code for stmf0Keith Packard2015-01-27
* altos/usbtrng-v2.0: Use stmf042 hardware CRC unitKeith Packard2015-01-27
* altos/stmf0: Add CRC driverKeith Packard2015-01-27
* altos/stmf0: Remove remaining stm32l bits from stm32f0 codeKeith Packard2015-01-27
* altos/stm: Fix typo in stm32l.hKeith Packard2015-01-26
* altos/usbtrng-v2.0: Add random output commandKeith Packard2015-01-26
* altos/stmf0: Add ADC and DMA APIsKeith Packard2015-01-26
* altos/stmf0: Add faster USB pathKeith Packard2015-01-26
* altos/stmf0: Fix linker scripts to make ao_boot workKeith Packard2015-01-26
* ao-tools: Add --wait option to ao-usbloadKeith Packard2015-01-25
* altos: Add flash-loader to usbtrng-v2.0Keith Packard2015-01-25
* altos: Add self-flash support for STM32F042 processorKeith Packard2015-01-25
* altos: USBtrng v2.0 hardware bringupKeith Packard2015-01-25
* altos: Initial STMF04x supportKeith Packard2015-01-25
* altos: Add support for TeleBT v3.0Keith Packard2015-01-24
* altos/lpc: Fix double-buffered USB changesKeith Packard2015-01-22
* altos: Get rid of some accidental debug codeKeith Packard2015-01-22
* Set version to 1.5.9.11.5.9.1Keith Packard2015-01-16
* altos/lpc: Switch LPC SPI driver to interrupt-drivenbdale-altosdroidKeith Packard2014-12-22
* altos: Adjust CC1200 RSSI reporting valueKeith Packard2014-12-22
* altos: Document cc115l power measured at RF setting 0x03 as -31.75dBmKeith Packard2014-12-22
* altos/cc1200: With PQT wide open, we can't use PQT_REACHED for startKeith Packard2014-11-23
* altos/cc1200: Open up preamble detect to improve sensitivityKeith Packard2014-11-23
* altos/cc1200: Wait for packet to be placed in FIFO during receiveKeith Packard2014-11-23
* altos/teledongle-v1.8: Make this the same as teledongle v1.9Keith Packard2014-11-16
* altos: Allow TeleMega to be built without MPU6000Keith Packard2014-11-16
* altos/microsplash: fix .gitignore to ignore resulting binaryKeith Packard2014-11-16
* altos: Reset interrupt flags before TX in CC1200 driverKeith Packard2014-11-06
generated by cgit v1.2.3 (git 2.39.1) at 2025-10-15 17:40:35 +0000