summaryrefslogtreecommitdiff
path: root/src
Commit message (Collapse)AuthorAge
...
* altos: Fix .sdcdbrc file for telebt-v0.1Keith Packard2012-08-07
| | | | Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Oops. Serial 1 stdin was busted by typoKeith Packard2012-08-07
| | | | | | | | | | A typo in the symbol used to enable stdin wakeups from serial1 caused the input to pend until some other wakeup occurred. This also makes the serial1 hw flow control pin selects in config 2 work right, although those aren't used by any current product Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Add button driver and event queueKeith Packard2012-08-06
| | | | | | | With this, a single task can wait for any button or quadrature input device. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Support multiple quadrature encoders.Keith Packard2012-08-06
| | | | Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Fix up quadrature driverKeith Packard2012-08-06
| | | | | | Mostly works now, should work reliably with a bit of input filtering. Signed-off-by: Keith Packard <keithp@keithp.com>
* Signed-off-by: Keith Packard <keithp@keithp.com>Keith Packard2012-08-06
| | | | altos: Test quadrature driver
* altos: Add quadrature driverKeith Packard2012-08-06
| | | | Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Add ao_gpio_get and ao_exti_set_modeKeith Packard2012-08-06
| | | | | | Needed to support general GPIO interrupts Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Build ao_kalman.h from cc1111 subdirs as neededKeith Packard2012-08-05
| | | | Signed-off-by: Keith Packard <keithp@keithp.com>
* src/cc1111: Enable SPI slave modeKeith Packard2012-08-05
| | | | | | This is untested... Signed-off-by: Keith Packard <keithp@keithp.com>
* src/cc1111: Allow serial0 without serial1Keith Packard2012-08-05
| | | | | | The ao_serial_speed structure is needed by serial0 too. Signed-off-by: Keith Packard <keithp@keithp.com>
* src/cc1111: Add ao_gpio_set macroKeith Packard2012-08-05
| | | | | | Allows general GPIO-using code to run on cc1111 Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Add driver for STM internal flashKeith Packard2012-07-29
| | | | Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Add telefire-v0.1Keith Packard2012-07-29
| | | | Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Add software AES implementationKeith Packard2012-07-29
| | | | | | This is untested Signed-off-by: Keith Packard <keithp@keithp.com>
* altos/cc1111: Fix serial 0 option 2 pins definitionsKeith Packard2012-07-29
| | | | | | tx/rx are 4/5, rts/cts are 2/3 Signed-off-by: Keith Packard <keithp@keithp.com>
* Add ability to re-play telemetry through TeleDongleKeith Packard2012-07-29
| | | | | | | | This adds a new command to TeleDongle to send arbitrary data, and then creates a new tool, 'ao-send-telem' that replays existing telemetry files through TeleDongle. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Move ao_radio_cmac.c to core (it doesn't depend on hardware)Keith Packard2012-07-22
| | | | Signed-off-by: Keith Packard <keithp@keithp.com>
* Add stlink pinoutKeith Packard2012-07-20
| | | | Signed-off-by: Keith Packard <keithp@keithp.com>
* telescience: correctly calculating rate values with higher resolutionRobert Garbee2012-07-18
|
* Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altosRobert Garbee2012-07-18
|\
| * altos: Toggling telemetry monitoring would replay the telem queueKeith Packard2012-07-17
| | | | | | | | | | | | | | | | Using the 'm' command to turn telem off and back on would end up going around the whole telemetry queue replaying everything there as the wait loop would exit when disabling monitoring even if the ring was empty. Signed-off-by: Keith Packard <keithp@keithp.com>
| * altos: With debug cables disconnected, CC1120 seems happy at +16dBmKeith Packard2012-07-17
| | | | | | | | | | | | Let's see how it goes... Signed-off-by: Keith Packard <keithp@keithp.com>
| * altos: Megametrum ADC values are 12 bits, discard low 4 for telemetryKeith Packard2012-07-17
| | | | | | | | | | | | | | We've only got space for 8 bits for the ADC values for pyro channels, discard the low 4 bits instead of the low 8 bits. Signed-off-by: Keith Packard <keithp@keithp.com>
* | ICP3 workingRobert Garbee2012-07-18
| |
* | Timer 3 working with slower clock and all 16 bits.Robert Garbee2012-07-18
| |
* | first work on PWM input to TeleScience, 'p' command displays timer 1Robert Garbee2012-07-17
|/
* altos: Place STM config values at fixed addresses for re-useKeith Packard2012-07-17
| | | | | | | | Just like cc1111, stick the serial number and radio calibration values at known fixed addresses so that when re-flashing the board, we can go find the existing values. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: megametrum depends on ao_companion.hKeith Packard2012-07-16
| | | | Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Enable pyro channel control in telepyroKeith Packard2012-07-16
| | | | | | This should make the board actually work now. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Add manual firing command for extra pyro channelsKeith Packard2012-07-16
| | | | | | | In parallel with the existing igniter commands, this tests the programmable pyro channels Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Use 'HAS_ORIENT' to enable orientation selection in pyro codeKeith Packard2012-07-16
| | | | | | Don't expose orientation options when no orientation data is available Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Pass flight dynamics to companion boardsKeith Packard2012-07-16
| | | | | | Necessary for TelePyro Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Make ao_tick_count visibleKeith Packard2012-07-16
| | | | | | | Necessary to fetch it when interrupts are already disabled as we can't call ao_time then. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Remove some debug code from avr ADC driverKeith Packard2012-07-16
| | | | Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Make sure telepyro ao_product.h is built before .o filesKeith Packard2012-07-16
| | | | Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Make storage addresses datatype configurableKeith Packard2012-07-16
| | | | | | No sense using 32 bits for tiny hardware Signed-off-by: Keith Packard <keithp@keithp.com>
* src: Add driver for AVR internal eeprom. Use for telepyro config.Keith Packard2012-07-16
| | | | Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: No space for pyro help on TP v0.1Keith Packard2012-07-16
| | | | | | | AVR doesn't have enough ram to hold the help messages, and we can't use them in flash. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Remove unused 'func' from ao_config_setKeith Packard2012-07-16
| | | | Signed-off-by: Keith Packard <keithp@keithp.com>
* altos/avr: Remove debugging command from USB driverKeith Packard2012-07-16
| | | | Signed-off-by: Keith Packard <keithp@keithp.com>
* altos/avr: Remove debugging printf in avr stdio startupKeith Packard2012-07-16
| | | | Signed-off-by: Keith Packard <keithp@keithp.com>
* src: Add explicit 'pin' argument to ao_enable_outputKeith Packard2012-07-14
| | | | | | | This lets the cc1111 use the atomic bit operation instead of a mask, which is immune to interrupt issues as well as being a shorter code sequence. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos/megametrum: Support the four additional pyro channelsKeith Packard2012-07-14
| | | | | | These use the new pyro code to allow for some flexibility in programming. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos/stm: Expose ao_gpio_set which sets a specific GPIO pinKeith Packard2012-07-14
| | | | | | Will need versions for other architectures Signed-off-by: Keith Packard <keithp@keithp.com>
* stm: running out of memory in MM -- reduce stack to 668 bytesKeith Packard2012-07-14
| | | | Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Add arbitrary pyro channel supportKeith Packard2012-07-14
| | | | | | | Programmed by specifying a conjunction of flight conditions that trigger the igniter to fire. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos/stm: Force STM stack to start at the top of RAMKeith Packard2012-07-14
| | | | | | | Using a fixed size means crashing if there's not enough space for that, or wasting memory if there's too much. Signed-off-by: Keith Packard <keithp@keithp.com>
* Report RSSI values in monitor idle UI (trac #44)Keith Packard2012-07-11
| | | | | | | | This adds a new 's' command to TeleDongle to report RSSI value from last received packet, and then has AltosUI request that value when closing the remote link. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Fix gcc compiler warnings in GPS codeKeith Packard2012-07-11
| | | | | | unused variables and mis-matches in printf format codes. Signed-off-by: Keith Packard <keithp@keithp.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-10-21 21:16:34 +0000